[Sun May 12 02:25:38 2013] Detection parameters:
  Position = (346.1, 393.0) = 8 23 51.61 -42 53 28.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 110.2 +/- 23.3
  Background counts = 211.7
  Rate = 0.1 +/- 0.02

[Sun May 12 02:25:42 2013] Off-axis axis estimate = 7.68'
[Sun May 12 02:26:58 2013] Using EEF radius (= 10.27 ")to estimate initial spatial extent for simple fitting
[Sun May 12 02:26:58 2013] Initial guess for spatial extent in simple fitting = 10.27"
[Sun May 12 02:26:58 2013] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.100
[Sun May 12 02:26:58 2013] Giving source the simple spatial ID 55 for pass 0, mean size = 10.27"
[Sun May 12 02:27:01 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src55.ximg exists
[Sun May 12 02:27:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src55.csv
[Sun May 12 02:27:01 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src55_1.ximg exists
[Sun May 12 02:27:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src55.csv
[Sun May 12 02:27:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:27:04 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Sun May 12 02:27:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src55.csv
[Sun May 12 02:27:04 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Sun May 12 02:27:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src55.csv
[Sun May 12 02:27:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:28:12 2013] Warning: source 55 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 56 at 12.578529 pixels away
[Sun May 12 02:28:12 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:28:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:28:12 2013] Assessing source extent using major
[Sun May 12 02:28:12 2013] Source does appear to be extended
[Sun May 12 02:28:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 02:29:01 2013] Using EEF radius (= 10.27 ")to estimate initial spatial extent for simple fitting
[Sun May 12 02:29:01 2013] Initial guess for spatial extent in simple fitting = 10.27"
[Sun May 12 02:29:01 2013] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.100
[Sun May 12 02:29:01 2013] Giving source the simple spatial ID 51 for pass 1, mean size = 10.27"
[Sun May 12 02:29:03 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src51.ximg exists
[Sun May 12 02:29:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src51.csv
[Sun May 12 02:29:03 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src51_1.ximg exists
[Sun May 12 02:29:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src51.csv
[Sun May 12 02:29:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:29:05 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Sun May 12 02:29:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src51.csv
[Sun May 12 02:29:05 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Sun May 12 02:29:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src51.csv
[Sun May 12 02:29:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:30:03 2013] Source 56 is offset by -0.635020 and -6.333997 pixels which is larger than
2 X fitted extent = 1.250138 x 1.250138, not incorporating fit results
[Sun May 12 02:30:03 2013] Source 56 is offset by -4.127365 and 3.923083 pixels which is larger than
2 X fitted extent = 1.180120 x 1.180120, not incorporating fit results
[Sun May 12 02:30:04 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:30:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:30:04 2013] Assessing source extent using major
[Sun May 12 02:30:04 2013] Source does appear to be extended
[Sun May 12 02:30:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 02:31:56 2013] XMMSAS src. selection expression = ellipse(30062.649231, 34141.536224, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 12 02:31:56 2013] Not overwriting source region fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src56_src.reg
[Sun May 12 02:31:56 2013] Extracting stamp from image fullrun_mos1_xmm0150150201_pi300-10000_cl_sm2.00.img.gz, (309, 355) - (384, 430)
[Sun May 12 02:31:56 2013] XMMSAS bgd. selection expression = annulus(30062.649231, 34141.536224, 1087.500000, 2175.000000, X, Y) && !ellipse(32374.626000, 36065.410080, 3616.248104, 3616.248104, 0.000000, X, Y) && !ellipse(31683.364075, 36396.789795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29715.534000, 38175.036000, 1914.680055, 1914.680055, 0.000000, X, Y) && !ellipse(28832.248000, 36680.652000, 1804.952052, 1804.952052, 0.000000, X, Y) && !ellipse(31362.997620, 35975.537537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28227.206238, 36052.424530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30636.466000, 36283.276000, 1298.456037, 1298.456037, 0.000000, X, Y) && !ellipse(29291.174713, 35420.779785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32751.981506, 36585.331390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30354.092000, 36746.856000, 1805.160052, 1805.160052, 0.000000, X, Y) && !ellipse(29899.633087, 36667.509857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28497.841339, 35127.117615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30182.823822, 35595.475403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33166.242000, 37571.108000, 1873.376054, 1873.376054, 0.000000, X, Y) && !ellipse(27821.440765, 36484.899597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28903.872314, 34697.956024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28493.460541, 37106.643738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29389.086884, 34413.915680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32905.636017, 33867.778809, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 12 02:31:56 2013] Writing fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src56.gif
[Sun May 12 02:45:06 2013] Mean detx,y = (1868.98, 7167.13) 
[Sun May 12 02:45:09 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 12 02:45:39 2013] Binned source spectrum to 10 counts/bin
[Sun May 12 02:45:39 2013] Setting source spectrum file to fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Sun May 12 02:45:39 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Sun May 12 03:51:35 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 12 03:51:35 2013] rmf not generated due to insufficient counts
[Sun May 12 04:25:43 2013] Updating aperture counts using extracted products
[Sun May 12 04:25:43 2013] Total counts from fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src56_src_b10.pi.gz = 1126.00
[Sun May 12 04:25:44 2013] Total counts from fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src56_bgd.pi.gz = 164.00
[Sun May 12 04:25:44 2013] Got source and background scale factors 1233432.000000, 406698.000000
[Sun May 12 04:25:44 2013] User source parameters:
  Position = (346.1, 393.0) = 8 23 51.61 -42 53 28.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 628.6 +/- 34.6
  Background aperture counts = 497.4
  Rate = 1 +/- 0.06

[Sun May 12 04:25:44 2013] Updating counts from extracted products
[Sun May 12 04:25:44 2013] Set source signif. to 628.62/22.30 = 28.19
[Sun May 12 04:25:50 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 04:25:50 2013] Using photon index=1.80, rate=1.01, arf fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src56.arf
[Sun May 12 04:25:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 12 04:25:50 2013] Updating source flux to 2e-11
[Sun May 12 04:26:12 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 12 04:26:30 2013] xmm0150150201/analysis//spectral/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src56_pl.csv not found, spectral fit skipped or did not complete