[Sun May 12 02:25:35 2013] Detection parameters:
  Position = (371.0, 417.0) = 8 23 41.76 -42 51 43.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 347.9 +/- 30.4
  Background counts = 142.1
  Rate = 0.4 +/- 0.03

[Sun May 12 02:25:42 2013] Off-axis axis estimate = 10.08'
[Sun May 12 02:26:58 2013] Using EEF radius (= 11.47 ")to estimate initial spatial extent for simple fitting
[Sun May 12 02:26:58 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 12 02:26:58 2013] Initial guess for spatial extent in simple fitting = 11.47"
[Sun May 12 02:26:58 2013] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.915
[Sun May 12 02:26:58 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 11.47"
[Sun May 12 02:27:00 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src14.ximg exists
[Sun May 12 02:27:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src14.csv
[Sun May 12 02:27:00 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src14_1.ximg exists
[Sun May 12 02:27:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src14.csv
[Sun May 12 02:27:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:27:03 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Sun May 12 02:27:03 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Sun May 12 02:27:03 2013] Fit fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Sun May 12 02:28:12 2013] Warning, spatial fit 14 centroid is now closest to src. 30
[Sun May 12 02:28:12 2013] Spatial fit model total counts = 1859.770000, observed total counts = 1861.000000
[Sun May 12 02:28:12 2013] Offset between fit and detection position for source 48 = 4.841620 pixels
[Sun May 12 02:28:12 2013] Warning, changing simple spatial fit ID from 14 to 19
[Sun May 12 02:28:12 2013] 1783.675000 total counts/ 1623.060000 bgd. counts: snr = 3.986748
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 4.841620 pixels
  Position = (367.5, 413.6) = 8 23 43.14 -42 51 58.2
  Extent = 22.6 (22.5-22.6)", rotation angle = 0
  Source counts = 160.6 +/- 42.2
  Background counts = 1623.1
  Rate = 0.3 +/- 0.07
[Sun May 12 02:28:12 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:28:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:28:12 2013] Assessing source extent using major axis lower bound
[Sun May 12 02:28:12 2013] Source does appear to be extended
[Sun May 12 02:28:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 02:28:12 2013] Source is confused with source 43
[Sun May 12 02:28:12 2013] Source is confused with source 42
[Sun May 12 02:28:12 2013] Source is confused with source 49
[Sun May 12 02:28:12 2013] Source is confused with source 44
[Sun May 12 02:28:12 2013] Source is confused with source 37
[Sun May 12 02:29:01 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 12 02:29:01 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 12 02:29:01 2013] Initial guess for spatial extent in simple fitting = 22.61"
[Sun May 12 02:29:01 2013] source mask rpix=5.2, npix_max = 129, mask sum = 121, frac = 0.932
[Sun May 12 02:29:01 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 22.61"
[Sun May 12 02:29:02 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src13.ximg exists
[Sun May 12 02:29:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src13.csv
[Sun May 12 02:29:02 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src13_1.ximg exists
[Sun May 12 02:29:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src13.csv
[Sun May 12 02:29:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:29:04 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sun May 12 02:29:04 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sun May 12 02:29:04 2013] Fit fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Sun May 12 02:30:03 2013] Spatial fit model total counts = 6373.030000, observed total counts = 6248.000000
[Sun May 12 02:30:03 2013] Offset between fit and detection position for source 48 = 5.366555 pixels
[Sun May 12 02:30:03 2013] 6342.680000 total counts/ 4395.270000 bgd. counts: snr = 29.374103
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 5.366555 pixels
  Position = (372.7, 415.1) = 8 23 41.11 -42 51 51.7
  Extent = 45.2 (45.2-45.2)", rotation angle = 0
  Source counts = 1947.4 +/- 79.6
  Background counts = 4395.3
  Rate = 3 +/- 0.1
[Sun May 12 02:30:03 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:30:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:30:03 2013] Assessing source extent using major axis lower bound
[Sun May 12 02:30:03 2013] Source does appear to be extended
[Sun May 12 02:30:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 02:31:53 2013] Counts = 1947.410000, rescaling region sizes by 2.000000
[Sun May 12 02:31:53 2013] XMMSAS src. selection expression = ellipse(32374.626000, 36065.410080, 5424.372156, 5424.372156, 0.000000, X, Y)
[Sun May 12 02:31:53 2013] Not overwriting source region fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src48_src.reg
[Sun May 12 02:31:53 2013] Extracting stamp from image fullrun_mos1_xmm0150150201_pi300-10000_cl_sm2.00.img.gz, (61, 103) - (595, 595)
[Sun May 12 02:31:53 2013] XMMSAS bgd. selection expression = annulus(32374.626000, 36065.410080, 18081.240520, 36162.481041, X, Y) && !ellipse(24754.786000, 28232.498000, 1756.576051, 510.780815, 126.522000, X, Y) && !ellipse(26236.857600, 27935.482340, 1658.152048, 1658.152048, 0.000000, X, Y) && !ellipse(24986.203400, 28749.034800, 1106.928032, 1106.928032, 0.000000, X, Y) && !ellipse(25876.385306, 29895.594000, 952.592027, 417.880812, 320.648000, X, Y) && !ellipse(26428.793000, 26979.350400, 1083.024031, 1083.024031, 0.000000, X, Y) && !ellipse(26119.866000, 31549.855800, 1385.728040, 1385.728040, 0.000000, X, Y) && !ellipse(25064.263600, 28846.106000, 1291.744037, 1291.744037, 0.000000, X, Y) && !ellipse(25765.042400, 31015.129200, 1351.456039, 760.260822, 305.316000, X, Y) && !ellipse(26179.602000, 29159.374000, 1023.408029, 1023.408029, 0.000000, X, Y) && !ellipse(25038.810760, 30489.684143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26446.874000, 30074.768000, 1349.464039, 1349.464039, 0.000000, X, Y) && !ellipse(24937.573000, 26358.556000, 1060.024031, 1060.024031, 0.000000, X, Y) && !ellipse(30224.799835, 38489.197144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31398.009200, 38245.942200, 1182.696034, 687.524020, 48.481000, X, Y) && !ellipse(31683.364075, 36396.789795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29825.997200, 38415.146000, 1053.376030, 1053.376030, 0.000000, X, Y) && !ellipse(29715.534000, 38175.036000, 1914.680055, 1914.680055, 0.000000, X, Y) && !ellipse(28832.248000, 36680.652000, 1804.952052, 1804.952052, 0.000000, X, Y) && !ellipse(31362.997620, 35975.537537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28227.206238, 36052.424530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30636.466000, 36283.276000, 1298.456037, 1298.456037, 0.000000, X, Y) && !ellipse(31974.655304, 37530.269592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23919.997345, 27338.687408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29871.739349, 37363.026642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30866.998322, 37882.615875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29291.174713, 35420.779785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27246.028000, 26860.354000, 1175.096034, 1175.096034, 0.000000, X, Y) && !ellipse(32751.981506, 36585.331390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30354.092000, 36746.856000, 1805.160052, 1805.160052, 0.000000, X, Y) && !ellipse(29899.633087, 36667.509857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31291.447235, 37713.639191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28497.841339, 35127.117615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30182.823822, 35595.475403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33166.242000, 37571.108000, 1873.376054, 1873.376054, 0.000000, X, Y) && !ellipse(27821.440765, 36484.899597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29103.222534, 37876.262390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28903.872314, 34697.956024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24612.349335, 25022.920410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23495.032000, 27016.052000, 1190.000034, 1190.000034, 0.000000, X, Y) && !ellipse(33434.379791, 42760.366669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24043.379211, 30230.948883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32439.906708, 37337.331268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28493.460541, 37106.643738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32530.454600, 38438.158000, 1785.776051, 1785.776051, 351.232000, X, Y) && !ellipse(29389.086884, 34413.915680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33361.286835, 41414.564178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30062.649231, 34141.536224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23175.880249, 26445.283325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25053.803711, 25463.615448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31387.535400, 39120.621521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24037.771790, 25463.636688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24412.927429, 30685.954529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32733.388336, 38951.785553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25631.896000, 14968.468000, 1785.776051, 1785.776051, 0.000000, X, Y) && !ellipse(32905.636017, 33867.778809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32950.096000, 41201.170800, 1349.792039, 1349.792039, 0.000000, X, Y) && !ellipse(23273.378235, 20351.622040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32552.692352, 41272.907745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26949.162750, 13806.565948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35749.482000, 23431.924000, 3305.408095, 3305.408095, 0.000000, X, Y) && !ellipse(34224.136000, 23560.540000, 1578.336045, 1578.336045, 0.000000, X, Y) && !ellipse(26368.434000, 11730.929200, 1967.480057, 1967.480057, 0.000000, X, Y) && !ellipse(35208.816000, 23364.982660, 3199.824092, 3199.824092, 0.000000, X, Y) && !ellipse(33308.382000, 24285.742000, 1799.968052, 1799.968052, 0.000000, X, Y)
[Sun May 12 02:31:53 2013] Writing fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src48.gif
[Sun May 12 02:32:02 2013] ../../xmm0150150201/products/events/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src48_src.evt and ../../xmm0150150201/products/events/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src48_bgd.evt exist, delete to re-create
[Sun May 12 02:32:02 2013] Mean detx,y = (2926.74, 10686.23) 
[Sun May 12 02:32:02 2013] ../../xmm0150150201/products/images/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src48_src.img and ../../xmm0150150201/products/images/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src48_bgd.img exist, delete to re-create
[Sun May 12 02:32:02 2013] ../../xmm0150150201/products/spectra/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src48_src.pi and ../../xmm0150150201/products/spectra/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src48_bgd.pi exist, delete to re-create
[Sun May 12 02:32:02 2013] Setting source spectrum file to fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src48_src.pi.gz
[Sun May 12 02:32:02 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Sun May 12 02:32:02 2013] ../../xmm0150150201/products/lightcurves/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src48_src.lc and ../../xmm0150150201/products/lightcurves/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src48_bgd.lc exist, delete to re-create
[Sun May 12 04:25:34 2013] Updating aperture counts using extracted products
[Sun May 12 04:25:34 2013] Total counts from fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src48_src.pi.gz = 31265.00
[Sun May 12 04:25:34 2013] Total counts from fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src48_bgd.pi.gz = 8451.00
[Sun May 12 04:25:34 2013] Got source and background scale factors 78513564.000000, 273347972.000000
[Sun May 12 04:25:34 2013] User source parameters:
  Position = (372.7, 415.1) = 8 23 41.11 -42 51 51.7
  Extent = 45.2 (45.2-45.2)", rotation angle = 0
  Source aperture counts = 28837.6 +/- 177.8
  Background aperture counts = 2427.4
  Rate = 5e+01 +/- 0.3

[Sun May 12 04:25:48 2013] No arf file for this source, not re-computing flux
[Sun May 12 04:26:12 2013] Flag c found in src. 48 procflags, skipping spectral fitting
[Sun May 12 04:26:12 2013] Source 48 has no response, skipping
[Sun May 12 04:26:30 2013] xmm0150150201/analysis//spectral/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src48_pl.csv not found, spectral fit skipped or did not complete