[Sun May 12 02:25:34 2013] Detection parameters:
  Position = (377.0, 421.1) = 8 23 39.39 -42 51 25.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 166.5 +/- 24.6
  Background counts = 152.3
  Rate = 0.2 +/- 0.03

[Sun May 12 02:25:42 2013] Off-axis axis estimate = 10.56'
[Sun May 12 02:26:58 2013] Using EEF radius (= 11.71 ")to estimate initial spatial extent for simple fitting
[Sun May 12 02:26:58 2013] Initial guess for spatial extent in simple fitting = 11.71"
[Sun May 12 02:26:58 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.884
[Sun May 12 02:26:58 2013] Giving source the simple spatial ID 35 for pass 0, mean size = 11.71"
[Sun May 12 02:27:00 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src35.ximg exists
[Sun May 12 02:27:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src35.csv
[Sun May 12 02:27:00 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src35_1.ximg exists
[Sun May 12 02:27:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src35.csv
[Sun May 12 02:27:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:27:04 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Sun May 12 02:27:04 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Sun May 12 02:27:04 2013] Fit fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Sun May 12 02:28:12 2013] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 37 at 11.845171 pixels away
[Sun May 12 02:28:12 2013] Warning, spatial fit 35 centroid is now closest to src. 30
[Sun May 12 02:28:12 2013] Warning: source 81 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 37 at 15.467308 pixels away
[Sun May 12 02:28:12 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:28:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:28:12 2013] Assessing source extent using major
[Sun May 12 02:28:12 2013] Source does appear to be extended
[Sun May 12 02:28:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 02:28:12 2013] Source is confused with source 48
[Sun May 12 02:29:01 2013] Using EEF radius (= 11.71 ")to estimate initial spatial extent for simple fitting
[Sun May 12 02:29:01 2013] Initial guess for spatial extent in simple fitting = 11.71"
[Sun May 12 02:29:01 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.884
[Sun May 12 02:29:01 2013] Giving source the simple spatial ID 32 for pass 1, mean size = 11.71"
[Sun May 12 02:29:02 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src32.ximg exists
[Sun May 12 02:29:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src32.csv
[Sun May 12 02:29:02 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src32_1.ximg exists
[Sun May 12 02:29:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src32.csv
[Sun May 12 02:29:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:29:04 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Sun May 12 02:29:04 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Sun May 12 02:29:04 2013] Fit fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly
[Sun May 12 02:30:03 2013] Source 37 is offset by -1.413454 and -5.034697 pixels which is larger than
2 X fitted extent = 1.366359 x 1.366359, not incorporating fit results
[Sun May 12 02:30:03 2013] Warning, spatial fit 32 centroid is now closest to src. 30
[Sun May 12 02:30:04 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:30:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:30:04 2013] Assessing source extent using major
[Sun May 12 02:30:04 2013] Source does appear to be extended
[Sun May 12 02:30:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 02:31:54 2013] XMMSAS src. selection expression = ellipse(32751.981506, 36585.331390, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 12 02:31:54 2013] Not overwriting source region fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src37_src.reg
[Sun May 12 02:31:54 2013] Extracting stamp from image fullrun_mos1_xmm0150150201_pi300-10000_cl_sm2.00.img.gz, (340, 384) - (415, 459)
[Sun May 12 02:31:54 2013] XMMSAS bgd. selection expression = annulus(32751.981506, 36585.331390, 1087.500000, 2175.000000, X, Y) && !ellipse(32374.626000, 36065.410080, 3616.248104, 3616.248104, 0.000000, X, Y) && !ellipse(30224.799835, 38489.197144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31398.009200, 38245.942200, 1182.696034, 687.524020, 48.481000, X, Y) && !ellipse(31683.364075, 36396.789795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29825.997200, 38415.146000, 1053.376030, 1053.376030, 0.000000, X, Y) && !ellipse(29715.534000, 38175.036000, 1914.680055, 1914.680055, 0.000000, X, Y) && !ellipse(28832.248000, 36680.652000, 1804.952052, 1804.952052, 0.000000, X, Y) && !ellipse(31362.997620, 35975.537537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30636.466000, 36283.276000, 1298.456037, 1298.456037, 0.000000, X, Y) && !ellipse(31974.655304, 37530.269592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29871.739349, 37363.026642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30866.998322, 37882.615875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30354.092000, 36746.856000, 1805.160052, 1805.160052, 0.000000, X, Y) && !ellipse(29899.633087, 36667.509857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31291.447235, 37713.639191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30182.823822, 35595.475403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33166.242000, 37571.108000, 1873.376054, 1873.376054, 0.000000, X, Y) && !ellipse(32439.906708, 37337.331268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32530.454600, 38438.158000, 1785.776051, 1785.776051, 351.232000, X, Y) && !ellipse(30062.649231, 34141.536224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31387.535400, 39120.621521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32733.388336, 38951.785553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32905.636017, 33867.778809, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 12 02:31:54 2013] Writing fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src37.gif
[Sun May 12 02:36:58 2013] Mean detx,y = (1905.63, 10800.80) 
[Sun May 12 02:37:01 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 12 02:37:11 2013] Binned source spectrum to 10 counts/bin
[Sun May 12 02:37:11 2013] Setting source spectrum file to fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Sun May 12 02:37:11 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Sun May 12 03:20:08 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 12 03:20:08 2013] rmf not generated due to insufficient counts
[Sun May 12 04:25:38 2013] Updating aperture counts using extracted products
[Sun May 12 04:25:38 2013] Total counts from fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src37_src_b10.pi.gz = 1154.00
[Sun May 12 04:25:38 2013] Total counts from fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src37_bgd.pi.gz = 0.00
[Sun May 12 04:25:38 2013] Got source and background scale factors 1276024.000000, 0.000000
[Sun May 12 04:25:38 2013] Background scale factor is not positive, halting re-assessment of this source
[Sun May 12 04:25:49 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 04:25:49 2013] Using photon index=1.80, rate=0.195, arf fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src37.arf
[Sun May 12 04:25:49 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 12 04:25:49 2013] Updating source flux to 4.9e-12
[Sun May 12 04:26:12 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 12 04:26:30 2013] xmm0150150201/analysis//spectral/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src37_pl.csv not found, spectral fit skipped or did not complete