[Sun May 12 02:25:32 2013] Detection parameters:
  Position = (348.0, 443.0) = 8 23 50.89 -42 49 49.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 267.3 +/- 24.2
  Background counts = 54.9
  Rate = 0.3 +/- 0.03

[Sun May 12 02:25:42 2013] Off-axis axis estimate = 11.08'
[Sun May 12 02:26:58 2013] Using EEF radius (= 11.97 ")to estimate initial spatial extent for simple fitting
[Sun May 12 02:26:58 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 12 02:26:58 2013] Initial guess for spatial extent in simple fitting = 11.97"
[Sun May 12 02:26:58 2013] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.852
[Sun May 12 02:26:58 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 11.97"
[Sun May 12 02:27:00 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src17.ximg exists
[Sun May 12 02:27:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src17.csv
[Sun May 12 02:27:00 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src17_1.ximg exists
[Sun May 12 02:27:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src17.csv
[Sun May 12 02:27:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:27:03 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sun May 12 02:27:03 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sun May 12 02:27:03 2013] Fit fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Sun May 12 02:28:12 2013] Warning, spatial fit 17 centroid is now closest to src. 27
[Sun May 12 02:28:12 2013] Source 19 is offset by -1.274094 and -6.388056 pixels which is larger than
2 X fitted extent = 1.457094 x 1.457094, not incorporating fit results
[Sun May 12 02:28:12 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:28:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:28:12 2013] Assessing source extent using major
[Sun May 12 02:28:12 2013] Source does appear to be extended
[Sun May 12 02:28:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 02:28:12 2013] Source is confused with source 20
[Sun May 12 02:28:12 2013] Source is confused with source 25
[Sun May 12 02:29:01 2013] Using EEF radius (= 11.97 ")to estimate initial spatial extent for simple fitting
[Sun May 12 02:29:01 2013] Initial guess for spatial extent in simple fitting = 11.97"
[Sun May 12 02:29:01 2013] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.852
[Sun May 12 02:29:01 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 11.97"
[Sun May 12 02:29:02 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src16.ximg exists
[Sun May 12 02:29:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src16.csv
[Sun May 12 02:29:02 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src16_1.ximg exists
[Sun May 12 02:29:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src16.csv
[Sun May 12 02:29:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:29:04 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Sun May 12 02:29:04 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Sun May 12 02:29:04 2013] Fit fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Sun May 12 02:30:03 2013] Warning, spatial fit 16 centroid is now closest to src. 25
[Sun May 12 02:30:03 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:30:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:30:03 2013] Assessing source extent using major
[Sun May 12 02:30:03 2013] Source does appear to be extended
[Sun May 12 02:30:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 02:31:53 2013] XMMSAS src. selection expression = ellipse(30224.799835, 38489.197144, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 12 02:31:53 2013] Not overwriting source region fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src19_src.reg
[Sun May 12 02:31:53 2013] Extracting stamp from image fullrun_mos1_xmm0150150201_pi300-10000_cl_sm2.00.img.gz, (310, 405) - (385, 480)
[Sun May 12 02:31:53 2013] XMMSAS bgd. selection expression = annulus(30224.799835, 38489.197144, 1087.500000, 2175.000000, X, Y) && !ellipse(32374.626000, 36065.410080, 3616.248104, 3616.248104, 0.000000, X, Y) && !ellipse(31398.009200, 38245.942200, 1182.696034, 687.524020, 48.481000, X, Y) && !ellipse(31683.364075, 36396.789795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29825.997200, 38415.146000, 1053.376030, 1053.376030, 0.000000, X, Y) && !ellipse(29715.534000, 38175.036000, 1914.680055, 1914.680055, 0.000000, X, Y) && !ellipse(28832.248000, 36680.652000, 1804.952052, 1804.952052, 0.000000, X, Y) && !ellipse(31362.997620, 35975.537537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28227.206238, 36052.424530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30636.466000, 36283.276000, 1298.456037, 1298.456037, 0.000000, X, Y) && !ellipse(31974.655304, 37530.269592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29871.739349, 37363.026642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30866.998322, 37882.615875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32751.981506, 36585.331390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30354.092000, 36746.856000, 1805.160052, 1805.160052, 0.000000, X, Y) && !ellipse(29899.633087, 36667.509857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31291.447235, 37713.639191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30182.823822, 35595.475403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33166.242000, 37571.108000, 1873.376054, 1873.376054, 0.000000, X, Y) && !ellipse(27821.440765, 36484.899597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29103.222534, 37876.262390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32439.906708, 37337.331268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28493.460541, 37106.643738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32530.454600, 38438.158000, 1785.776051, 1785.776051, 351.232000, X, Y) && !ellipse(31387.535400, 39120.621521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32733.388336, 38951.785553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32950.096000, 41201.170800, 1349.792039, 1349.792039, 0.000000, X, Y) && !ellipse(32552.692352, 41272.907745, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 12 02:31:53 2013] Writing fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src19.gif
[Sun May 12 02:32:02 2013] ../../xmm0150150201/products/events/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src19_src.evt and ../../xmm0150150201/products/events/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src19_bgd.evt exist, delete to re-create
[Sun May 12 02:32:02 2013] Mean detx,y = (4970.90, 10249.53) 
[Sun May 12 02:32:02 2013] ../../xmm0150150201/products/images/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src19_src.img and ../../xmm0150150201/products/images/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src19_bgd.img exist, delete to re-create
[Sun May 12 02:32:02 2013] ../../xmm0150150201/products/spectra/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src19_src.pi and ../../xmm0150150201/products/spectra/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src19_bgd.pi exist, delete to re-create
[Sun May 12 02:32:02 2013] Setting source spectrum file to fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src19_src.pi.gz
[Sun May 12 02:32:02 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sun May 12 02:32:02 2013] ../../xmm0150150201/products/lightcurves/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src19_src.lc and ../../xmm0150150201/products/lightcurves/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src19_bgd.lc exist, delete to re-create
[Sun May 12 02:58:23 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 12 02:58:23 2013] rmf not generated due to insufficient counts
[Sun May 12 04:25:34 2013] Updating aperture counts using extracted products
[Sun May 12 04:25:34 2013] Total counts from fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src19_src.pi.gz = 870.00
[Sun May 12 04:25:34 2013] Total counts from fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src19_bgd.pi.gz = 307.00
[Sun May 12 04:25:34 2013] Got source and background scale factors 1332800.000000, 1520340.000000
[Sun May 12 04:25:34 2013] User source parameters:
  Position = (348.0, 443.0) = 8 23 50.89 -42 49 49.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 600.9 +/- 30.5
  Background aperture counts = 269.1
  Rate = 1 +/- 0.05

[Sun May 12 04:25:34 2013] Updating counts from extracted products
[Sun May 12 04:25:34 2013] Set source signif. to 600.87/16.41 = 36.63
[Sun May 12 04:25:48 2013] No arf file for this source, not re-computing flux
[Sun May 12 04:26:12 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 12 04:26:30 2013] xmm0150150201/analysis//spectral/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete