[Sun May 12 02:25:32 2013] Detection parameters:
  Position = (374.7, 475.0) = 8 23 40.33 -42 47 31.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90.7 +/- 21.6
  Background counts = 126.8
  Rate = 0.06 +/- 0.01

[Sun May 12 02:25:42 2013] Off-axis axis estimate = 13.94'
[Sun May 12 02:26:58 2013] Using EEF radius (= 13.40 ")to estimate initial spatial extent for simple fitting
[Sun May 12 02:26:58 2013] Initial guess for spatial extent in simple fitting = 13.40"
[Sun May 12 02:26:58 2013] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.092
[Sun May 12 02:26:58 2013] Giving source the simple spatial ID 69 for pass 0, mean size = 13.40"
[Sun May 12 02:27:01 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src69.ximg exists
[Sun May 12 02:27:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src69.csv
[Sun May 12 02:27:01 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src69_1.ximg exists
[Sun May 12 02:27:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src69.csv
[Sun May 12 02:27:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:27:05 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src69.ximg exists
[Sun May 12 02:27:05 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src69_1.ximg exists
[Sun May 12 02:27:05 2013] Fit fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src69 appears to have run properly
[Sun May 12 02:28:12 2013] Source 13 is offset by 3.047107 and -4.719083 pixels which is larger than
2 X fitted extent = 1.694961 x 1.694961, not incorporating fit results
[Sun May 12 02:28:12 2013] Warning: source 66 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 12.525787 pixels away
[Sun May 12 02:28:12 2013] Warning, spatial fit 69 centroid is now closest to src. 14
[Sun May 12 02:28:12 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:28:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:28:12 2013] Assessing source extent using major
[Sun May 12 02:28:12 2013] Source does appear to be extended
[Sun May 12 02:28:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 02:28:12 2013] Source is confused with source 14
[Sun May 12 02:29:01 2013] Using EEF radius (= 13.40 ")to estimate initial spatial extent for simple fitting
[Sun May 12 02:29:01 2013] Initial guess for spatial extent in simple fitting = 13.40"
[Sun May 12 02:29:01 2013] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.092
[Sun May 12 02:29:01 2013] Giving source the simple spatial ID 63 for pass 1, mean size = 13.40"
[Sun May 12 02:29:03 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src63.ximg exists
[Sun May 12 02:29:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src63.csv
[Sun May 12 02:29:03 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src63_1.ximg exists
[Sun May 12 02:29:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src63.csv
[Sun May 12 02:29:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:29:07 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Sun May 12 02:29:07 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Sun May 12 02:29:07 2013] Fit fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src63 appears to have run properly
[Sun May 12 02:30:03 2013] Warning: source 63 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 17.969277 pixels away
[Sun May 12 02:30:04 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:30:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:30:04 2013] Assessing source extent using major
[Sun May 12 02:30:04 2013] Source does appear to be extended
[Sun May 12 02:30:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 02:31:57 2013] XMMSAS src. selection expression = ellipse(32552.692352, 41272.907745, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 12 02:31:57 2013] Not overwriting source region fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src13_src.reg
[Sun May 12 02:31:57 2013] Extracting stamp from image fullrun_mos1_xmm0150150201_pi300-10000_cl_sm2.00.img.gz, (337, 437) - (412, 512)
[Sun May 12 02:31:57 2013] XMMSAS bgd. selection expression = annulus(32552.692352, 41272.907745, 1087.500000, 2175.000000, X, Y) && !ellipse(32374.626000, 36065.410080, 3616.248104, 3616.248104, 0.000000, X, Y) && !ellipse(30224.799835, 38489.197144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31398.009200, 38245.942200, 1182.696034, 687.524020, 48.481000, X, Y) && !ellipse(29825.997200, 38415.146000, 1053.376030, 1053.376030, 0.000000, X, Y) && !ellipse(29715.534000, 38175.036000, 1914.680055, 1914.680055, 0.000000, X, Y) && !ellipse(33166.242000, 37571.108000, 1873.376054, 1873.376054, 0.000000, X, Y) && !ellipse(33434.379791, 42760.366669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32530.454600, 38438.158000, 1785.776051, 1785.776051, 351.232000, X, Y) && !ellipse(33361.286835, 41414.564178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31387.535400, 39120.621521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32733.388336, 38951.785553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32950.096000, 41201.170800, 1349.792039, 1349.792039, 0.000000, X, Y)
[Sun May 12 02:31:57 2013] Writing fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src13.gif
[Sun May 12 02:49:55 2013] Mean detx,y = (5415.02, 13912.10) 
[Sun May 12 02:49:57 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 12 02:50:09 2013] Binned source spectrum to 10 counts/bin
[Sun May 12 02:50:10 2013] Setting source spectrum file to fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sun May 12 02:50:10 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sun May 12 04:07:26 2013] Not generating rmf since there are only 90 counts
[Sun May 12 04:07:26 2013] rmf not generated due to insufficient counts
[Sun May 12 04:25:47 2013] Updating aperture counts using extracted products
[Sun May 12 04:25:47 2013] Total counts from fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 690.00
[Sun May 12 04:25:47 2013] Total counts from fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src13_bgd.pi.gz = 1323.00
[Sun May 12 04:25:47 2013] Got source and background scale factors 1331200.000000, 5453088.000000
[Sun May 12 04:25:47 2013] User source parameters:
  Position = (374.7, 475.0) = 8 23 40.33 -42 47 31.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 367.0 +/- 27.3
  Background aperture counts = 323.0
  Rate = 0.6 +/- 0.04

[Sun May 12 04:25:47 2013] Updating counts from extracted products
[Sun May 12 04:25:47 2013] Set source signif. to 367.03/17.97 = 20.42
[Sun May 12 04:25:50 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 04:25:50 2013] Using photon index=1.80, rate=0.589, arf fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src13.arf
[Sun May 12 04:25:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 12 04:25:50 2013] Updating source flux to 2e-11
[Sun May 12 04:26:12 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 12 04:26:30 2013] xmm0150150201/analysis//spectral/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete