[Tue Jun 25 17:16:04 2013] Detection parameters:
  Position = (308.1, 280.8) = 12 9 33.03 42 32 29.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27.2 +/- 7.7
  Background counts = 4.8
  Rate = 0.002 +/- 0.0007

[Tue Jun 25 17:16:04 2013] Off-axis axis estimate = 1.45'
[Tue Jun 25 18:21:15 2013] Using EEF radius (= 7.16 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 18:21:15 2013] Initial guess for spatial extent in simple fitting = 7.16"
[Tue Jun 25 18:21:15 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.869
[Tue Jun 25 18:21:15 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 7.16"
[Tue Jun 25 18:50:53 2013] fullrun_mos2_xmm0150010601_pi300-10000_cl_pass0_src16.ximg exists
[Tue Jun 25 18:50:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150010601_pi300-10000_cl_pass0_src16.csv
[Tue Jun 25 18:50:53 2013] fullrun_mos2_xmm0150010601_pi300-10000_cl_pass0_src16_1.ximg exists
[Tue Jun 25 18:50:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150010601_pi300-10000_cl_pass0_src16.csv
[Tue Jun 25 18:50:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150010601_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150010601_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 18:50:53 2013] fullrun_mos2_xmm0150010601_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Tue Jun 25 18:50:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150010601_pi300-10000_cl_pass0_tfrozen_src16.csv
[Tue Jun 25 18:50:53 2013] fullrun_mos2_xmm0150010601_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Tue Jun 25 18:50:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150010601_pi300-10000_cl_pass0_tfrozen_src16.csv
[Tue Jun 25 18:50:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150010601_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150010601_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 18:51:06 2013] Source 12 is offset by 6.641662 and 5.808612 pixels which is larger than
2 X fitted extent = 2.592915 x 2.592915, not incorporating fit results
[Tue Jun 25 18:51:06 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 18:51:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 18:51:06 2013] Assessing source extent using major
[Tue Jun 25 18:51:06 2013] Source does appear to be extended
[Tue Jun 25 18:51:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 19:48:43 2013] Using EEF radius (= 7.16 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 19:48:43 2013] Initial guess for spatial extent in simple fitting = 7.16"
[Tue Jun 25 19:48:43 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.869
[Tue Jun 25 19:48:43 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 7.16"
[Tue Jun 25 20:15:03 2013] fullrun_mos2_xmm0150010601_pi300-10000_cl_pass1_src16.ximg exists
[Tue Jun 25 20:15:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150010601_pi300-10000_cl_pass1_src16.csv
[Tue Jun 25 20:15:03 2013] fullrun_mos2_xmm0150010601_pi300-10000_cl_pass1_src16_1.ximg exists
[Tue Jun 25 20:15:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150010601_pi300-10000_cl_pass1_src16.csv
[Tue Jun 25 20:15:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150010601_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150010601_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 20:15:04 2013] fullrun_mos2_xmm0150010601_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Tue Jun 25 20:15:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150010601_pi300-10000_cl_pass1_tfrozen_src16.csv
[Tue Jun 25 20:15:04 2013] fullrun_mos2_xmm0150010601_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Tue Jun 25 20:15:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150010601_pi300-10000_cl_pass1_tfrozen_src16.csv
[Tue Jun 25 20:15:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150010601_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150010601_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 20:15:15 2013] Source 12 is offset by 6.641662 and 5.816383 pixels which is larger than
2 X fitted extent = 2.632156 x 2.632156, not incorporating fit results
[Tue Jun 25 20:15:15 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 20:15:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 20:15:15 2013] Assessing source extent using major
[Tue Jun 25 20:15:15 2013] Source does appear to be extended
[Tue Jun 25 20:15:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 21:03:42 2013] XMMSAS src. selection expression = ellipse(26752.844574, 24383.605286, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 25 21:03:42 2013] Writing source region out to fullrun_mos2_xmm0150010601_pi300-10000_pass1_cl_src12_src.reg
[Tue Jun 25 21:03:42 2013] Extracting stamp from image fullrun_mos2_xmm0150010601_pi300-10000_cl_sm2.00.img.gz, (271, 243) - (346, 318)
[Tue Jun 25 21:03:42 2013] XMMSAS bgd. selection expression = annulus(26752.844574, 24383.605286, 1087.500000, 2175.000000, X, Y) && !ellipse(26054.521600, 23856.809600, 379.622411, 379.622411, 0.000000, X, Y)
[Tue Jun 25 21:03:42 2013] Writing fullrun_mos2_xmm0150010601_pi300-10000_pass1_cl_src12.gif
[Tue Jun 25 21:08:06 2013] Mean detx,y = (688.27, 47.08) 
[Tue Jun 25 21:08:07 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 25 21:08:16 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 25 21:08:17 2013] Setting source spectrum file to fullrun_mos2_xmm0150010601_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Tue Jun 25 21:08:17 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0150010601_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Tue Jun 25 21:13:24 2013] Not generating rmf since there are only 27 counts
[Tue Jun 25 21:13:24 2013] rmf not generated due to insufficient counts
[Tue Jun 25 21:13:52 2013] Updating aperture counts using extracted products
[Tue Jun 25 21:13:52 2013] Total counts from fullrun_mos2_xmm0150010601_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 145.00
[Tue Jun 25 21:13:52 2013] Total counts from fullrun_mos2_xmm0150010601_pi300-10000_pass1_cl_src12_bgd.pi.gz = 308.00
[Tue Jun 25 21:13:52 2013] Got source and background scale factors 1306436.000000, 10315024.000000
[Tue Jun 25 21:13:52 2013] User source parameters:
  Position = (308.1, 280.8) = 12 9 33.03 42 32 29.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 106.0 +/- 13.1
  Background aperture counts = 39.0
  Rate = 0.009 +/- 0.001

[Tue Jun 25 21:13:52 2013] Updating counts from extracted products
[Tue Jun 25 21:13:52 2013] Set source signif. to 105.99/6.25 = 16.97
[Tue Jun 25 21:13:53 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 25 21:13:53 2013] Using photon index=1.80, rate=0.00886, arf fullrun_mos2_xmm0150010601_pi300-10000_pass1_cl_src12.arf
[Tue Jun 25 21:13:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 25 21:13:53 2013] Updating source flux to 9.5e-14
[Tue Jun 25 21:13:56 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 25 21:13:57 2013] xmm0150010601/analysis//spectral/fullrun_mos2_xmm0150010601_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete