[Tue Jun 25 17:15:43 2013] Detection parameters:
  Position = (341.1, 245.0) = 12 9 20.03 42 29 53.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.4 +/- 9.8
  Background counts = 4.1
  Rate = 0.006 +/- 0.001

[Tue Jun 25 17:15:43 2013] Off-axis axis estimate = 4.96'
[Tue Jun 25 17:58:53 2013] Using EEF radius (= 8.91 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 17:58:53 2013] Initial guess for spatial extent in simple fitting = 8.91"
[Tue Jun 25 17:58:53 2013] source mask rpix=2.0, npix_max = 25, mask sum = 29, frac = 1.117
[Tue Jun 25 17:58:53 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 8.91"
[Tue Jun 25 18:21:15 2013] fullrun_mos1_xmm0150010601_pi300-10000_cl_pass0_src7.ximg exists
[Tue Jun 25 18:21:15 2013] fullrun_mos1_xmm0150010601_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue Jun 25 18:21:15 2013] Fit fullrun_mos1_xmm0150010601_pi300-10000_cl_pass0_src7 appears to have run properly
[Tue Jun 25 18:21:15 2013] fullrun_mos1_xmm0150010601_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue Jun 25 18:21:15 2013] fullrun_mos1_xmm0150010601_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Jun 25 18:21:15 2013] Fit fullrun_mos1_xmm0150010601_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Tue Jun 25 18:51:03 2013] Spatial fit model total counts = 85.299400, observed total counts = 84.000000
[Tue Jun 25 18:51:03 2013] Offset between fit and detection position for source 5 = 0.083341 pixels
[Tue Jun 25 18:51:03 2013] 83.248300 total counts/ 35.060000 bgd. counts: snr = 8.138337
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.083341 pixels
  Position = (341.1, 245.0) = 12 9 20.06 42 29 53.5
  Extent = 7.5 (5.5-10.4)" x 5.1 (3.8-7.0)", rotation angle = 112 (90-90) degrees
  Source counts = 48.2 +/- 9.1
  Background counts = 35.1
  Rate = 0.004 +/- 0.0008
[Tue Jun 25 18:51:03 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 18:51:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 18:51:03 2013] Assessing source extent using major axis lower bound
[Tue Jun 25 18:51:03 2013] Source does appear to be extended
[Tue Jun 25 18:51:03 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.79
[Tue Jun 25 19:27:24 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 25 19:27:24 2013] Initial guess for spatial extent in simple fitting = 6.28"
[Tue Jun 25 19:27:24 2013] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.060
[Tue Jun 25 19:27:24 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 6.28"
[Tue Jun 25 19:48:43 2013] fullrun_mos1_xmm0150010601_pi300-10000_cl_pass1_src7.ximg exists
[Tue Jun 25 19:48:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150010601_pi300-10000_cl_pass1_src7.csv
[Tue Jun 25 19:48:43 2013] fullrun_mos1_xmm0150010601_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue Jun 25 19:48:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150010601_pi300-10000_cl_pass1_src7.csv
[Tue Jun 25 19:48:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150010601_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150010601_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 19:48:43 2013] fullrun_mos1_xmm0150010601_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue Jun 25 19:48:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150010601_pi300-10000_cl_pass1_tfrozen_src7.csv
[Tue Jun 25 19:48:43 2013] fullrun_mos1_xmm0150010601_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Jun 25 19:48:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150010601_pi300-10000_cl_pass1_tfrozen_src7.csv
[Tue Jun 25 19:48:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150010601_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150010601_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 20:15:12 2013] Warning, spatial fit 7 centroid is now closest to src. 14
[Tue Jun 25 20:15:12 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 20:15:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 20:15:12 2013] Assessing source extent using major axis lower bound
[Tue Jun 25 20:15:12 2013] Source does appear to be extended
[Tue Jun 25 20:15:12 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.79
[Tue Jun 25 20:51:09 2013] XMMSAS src. selection expression = ellipse(29623.611620, 21269.552200, 450.127213, 303.125409, 112.451000, X, Y)
[Tue Jun 25 20:51:09 2013] Writing source region out to fullrun_mos1_xmm0150010601_pi300-10000_pass1_cl_src5_src.reg
[Tue Jun 25 20:51:09 2013] Extracting stamp from image fullrun_mos1_xmm0150010601_pi300-10000_cl_sm2.00.img.gz, (315, 219) - (367, 271)
[Tue Jun 25 20:51:09 2013] XMMSAS bgd. selection expression = annulus(29623.611620, 21269.552200, 750.212022, 1500.424043, X, Y) && !ellipse(30435.205800, 20112.917800, 549.153616, 549.153616, 0.000000, X, Y)
[Tue Jun 25 20:51:09 2013] Writing fullrun_mos1_xmm0150010601_pi300-10000_pass1_cl_src5.gif
[Tue Jun 25 20:52:35 2013] Mean detx,y = (4544.63, -1369.63) 
[Tue Jun 25 20:52:36 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 25 20:52:44 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 25 20:52:44 2013] Setting source spectrum file to fullrun_mos1_xmm0150010601_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Jun 25 20:52:44 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0150010601_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Tue Jun 25 21:02:42 2013] Not generating rmf since there are only 48 counts
[Tue Jun 25 21:02:42 2013] rmf not generated due to insufficient counts
[Tue Jun 25 21:13:50 2013] Updating aperture counts using extracted products
[Tue Jun 25 21:13:50 2013] Total counts from fullrun_mos1_xmm0150010601_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 54.00
[Tue Jun 25 21:13:50 2013] Total counts from fullrun_mos1_xmm0150010601_pi300-10000_pass1_cl_src5_bgd.pi.gz = 103.00
[Tue Jun 25 21:13:50 2013] Got source and background scale factors 399276.000000, 4466536.000000
[Tue Jun 25 21:13:50 2013] User source parameters:
  Position = (341.1, 245.0) = 12 9 20.06 42 29 53.5
  Extent = 7.5 (5.5-10.4)" x 5.1 (3.8-7.0)", rotation angle = 112 (90-90) degrees
  Source aperture counts = 44.8 +/- 8.4
  Background aperture counts = 9.2
  Rate = 0.004 +/- 0.0007

[Tue Jun 25 21:13:51 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 25 21:13:51 2013] Using photon index=1.80, rate=0.00403, arf fullrun_mos1_xmm0150010601_pi300-10000_pass1_cl_src5.arf
[Tue Jun 25 21:13:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 25 21:13:51 2013] Updating source flux to 5.5e-14
[Tue Jun 25 21:13:54 2013] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jun 25 21:13:56 2013] xmm0150010601/analysis//spectral/fullrun_mos1_xmm0150010601_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete