[Mon May 28 10:11:34 2012] Detection parameters:
  Position = (287.8, 332.1) = 12 41 22.40 18 35 16.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.8 +/- 18.9
  Background counts = 99.8
  Rate = 0.007 +/- 0.002

[Mon May 28 10:11:35 2012] Off-axis axis estimate = 2.56'
[Mon May 28 10:13:37 2012] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Mon May 28 10:13:37 2012] Initial guess for spatial extent in simple fitting = 7.71"
[Mon May 28 10:13:37 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.775
[Mon May 28 10:13:37 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 7.71"
[Mon May 28 11:38:41 2012] fullrun_pn_xmm0149900301_pi300-10000_cl_pass0_src28.ximg exists
[Mon May 28 11:38:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149900301_pi300-10000_cl_pass0_src28.csv
[Mon May 28 11:38:41 2012] fullrun_pn_xmm0149900301_pi300-10000_cl_pass0_src28_1.ximg exists
[Mon May 28 11:38:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149900301_pi300-10000_cl_pass0_src28.csv
[Mon May 28 11:38:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0149900301_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0149900301_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 11:38:42 2012] fullrun_pn_xmm0149900301_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Mon May 28 11:38:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149900301_pi300-10000_cl_pass0_tfrozen_src28.csv
[Mon May 28 11:38:42 2012] fullrun_pn_xmm0149900301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Mon May 28 11:38:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149900301_pi300-10000_cl_pass0_tfrozen_src28.csv
[Mon May 28 11:38:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0149900301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0149900301_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 12:34:19 2012] Warning, spatial fit 28 centroid is now closest to src. 29
[Mon May 28 12:34:20 2012] Vigneting correction estimate = 1.000000
[Mon May 28 12:34:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 12:34:20 2012] Assessing source extent using major
[Mon May 28 12:34:20 2012] Source does appear to be extended
[Mon May 28 12:34:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 12:34:20 2012] Source is confused with source 28
[Mon May 28 12:34:35 2012] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Mon May 28 12:34:35 2012] Initial guess for spatial extent in simple fitting = 7.71"
[Mon May 28 12:34:35 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.775
[Mon May 28 12:34:35 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 7.71"
[Mon May 28 13:42:46 2012] fullrun_pn_xmm0149900301_pi300-10000_cl_pass1_src26.ximg exists
[Mon May 28 13:42:46 2012] fullrun_pn_xmm0149900301_pi300-10000_cl_pass1_src26_1.ximg exists
[Mon May 28 13:42:46 2012] Fit fullrun_pn_xmm0149900301_pi300-10000_cl_pass1_src26 appears to have run properly
[Mon May 28 13:42:46 2012] fullrun_pn_xmm0149900301_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Mon May 28 13:42:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149900301_pi300-10000_cl_pass1_tfrozen_src26.csv
[Mon May 28 13:42:46 2012] fullrun_pn_xmm0149900301_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Mon May 28 13:42:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149900301_pi300-10000_cl_pass1_tfrozen_src26.csv
[Mon May 28 13:42:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0149900301_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0149900301_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 14:23:59 2012] Source 30 is offset by -0.093392 and 2.168296 pixels which is larger than
2 X fitted extent = 0.885917 x 0.885917, not incorporating fit results
[Mon May 28 14:23:59 2012] Warning, spatial fit 26 centroid is now closest to src. 29
[Mon May 28 14:23:59 2012] Source 30 is offset by -0.332137 and 5.901676 pixels which is larger than
2 X fitted extent = 4.796000 x 1.136975, not incorporating fit results
[Mon May 28 14:23:59 2012] Vigneting correction estimate = 1.000000
[Mon May 28 14:23:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 14:23:59 2012] Assessing source extent using major
[Mon May 28 14:23:59 2012] Source does appear to be extended
[Mon May 28 14:23:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 14:24:14 2012] XMMSAS src. selection expression = ellipse(24991.776917, 28842.543793, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 28 14:24:14 2012] Writing source region out to fullrun_pn_xmm0149900301_pi300-10000_pass1_cl_src30_src.reg
[Mon May 28 14:24:14 2012] Extracting stamp from image fullrun_pn_xmm0149900301_pi300-10000_cl_sm2.00.img.gz, (250, 295) - (325, 370)
[Mon May 28 14:24:14 2012] XMMSAS bgd. selection expression = annulus(24991.776917, 28842.543793, 1087.500000, 2175.000000, X, Y) && !ellipse(23002.057240, 30676.951003, 424.275242, 392.263063, 97.950910, X, Y) && !ellipse(26370.344600, 27845.422200, 816.712024, 752.063222, 78.557900, X, Y) && !ellipse(25728.292664, 27710.611877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27605.217834, 29318.757812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24414.087600, 28931.250000, 1261.288036, 1261.288036, 0.000000, X, Y) && !ellipse(25611.221802, 29177.515564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25764.887400, 27959.746000, 1148.896033, 1148.896033, 0.000000, X, Y) && !ellipse(25172.900360, 27805.184021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27633.114227, 27278.646576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25916.905945, 27011.460358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24512.437927, 26705.728424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26931.934265, 26021.800842, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 28 14:24:14 2012] Writing fullrun_pn_xmm0149900301_pi300-10000_pass1_cl_src30.gif
[Mon May 28 14:38:51 2012] Mean detx,y = (-553.78, -1616.73) 
[Mon May 28 14:38:53 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 14:39:09 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 14:39:10 2012] Setting source spectrum file to fullrun_pn_xmm0149900301_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Mon May 28 14:39:10 2012] Setting bgd. spectrum file to fullrun_pn_xmm0149900301_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Mon May 28 15:15:25 2012] Not generating rmf since there are only 83 counts
[Mon May 28 15:15:25 2012] rmf not generated due to insufficient counts
[Mon May 28 16:18:07 2012] Updating aperture counts using extracted products
[Mon May 28 16:18:07 2012] Error reading totcts from fullrun_pn_xmm0149900301_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Mon May 28 16:18:07 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 16:18:07 2012] Using photon index=1.80, rate=0.00674, arf fullrun_pn_xmm0149900301_pi300-10000_pass1_cl_src30.arf
[Mon May 28 16:18:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 16:18:07 2012] Updating source flux to 2.2e-14
[Mon May 28 16:18:27 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting