[Thu Jun 13 17:15:00 2013] Detection parameters:
  Position = (224.7, 384.6) = 11 35 17.99 49 13 1.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.6 +/- 11.4
  Background counts = 21.9
  Rate = 0.003 +/- 0.0007

[Thu Jun 13 17:15:00 2013] Off-axis axis estimate = 8.22'
[Thu Jun 13 17:15:21 2013] Using EEF radius (= 10.54 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 17:15:21 2013] Initial guess for spatial extent in simple fitting = 10.54"
[Thu Jun 13 17:15:21 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.053
[Thu Jun 13 17:15:21 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 10.54"
[Thu Jun 13 17:15:22 2013] fullrun_pn_xmm0149900201_pi300-10000_cl_pass0_src29.ximg exists
[Thu Jun 13 17:15:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149900201_pi300-10000_cl_pass0_src29.csv
[Thu Jun 13 17:15:22 2013] fullrun_pn_xmm0149900201_pi300-10000_cl_pass0_src29_1.ximg exists
[Thu Jun 13 17:15:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149900201_pi300-10000_cl_pass0_src29.csv
[Thu Jun 13 17:15:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0149900201_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0149900201_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 17:15:23 2013] fullrun_pn_xmm0149900201_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Thu Jun 13 17:15:23 2013] fullrun_pn_xmm0149900201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Thu Jun 13 17:15:23 2013] Fit fullrun_pn_xmm0149900201_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Thu Jun 13 17:15:35 2013] Spatial fit model total counts = 272.580000, observed total counts = 274.000000
[Thu Jun 13 17:15:35 2013] Offset between fit and detection position for source 29 = 0.190190 pixels
[Thu Jun 13 17:15:35 2013] 269.209000 total counts/ 213.875000 bgd. counts: snr = 3.783660
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.190190 pixels
  Position = (224.8, 384.8) = 11 35 17.94 49 13 2.3
  Extent = 8.8 (6.0-14.1)", rotation angle = 0
  Source counts = 55.3 +/- 16.4
  Background counts = 213.9
  Rate = 0.003 +/- 0.001
[Thu Jun 13 17:15:35 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 17:15:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 17:15:35 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 17:15:35 2013] Source does appear to be extended
[Thu Jun 13 17:15:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 17:15:55 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 13 17:15:55 2013] Initial guess for spatial extent in simple fitting = 8.84"
[Thu Jun 13 17:15:55 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.974
[Thu Jun 13 17:15:55 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 8.84"
[Thu Jun 13 17:15:56 2013] fullrun_pn_xmm0149900201_pi300-10000_cl_pass1_src29.ximg exists
[Thu Jun 13 17:15:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149900201_pi300-10000_cl_pass1_src29.csv
[Thu Jun 13 17:15:56 2013] fullrun_pn_xmm0149900201_pi300-10000_cl_pass1_src29_1.ximg exists
[Thu Jun 13 17:15:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149900201_pi300-10000_cl_pass1_src29.csv
[Thu Jun 13 17:15:56 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0149900201_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0149900201_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 17:15:56 2013] fullrun_pn_xmm0149900201_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Thu Jun 13 17:15:56 2013] fullrun_pn_xmm0149900201_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Thu Jun 13 17:15:56 2013] Fit fullrun_pn_xmm0149900201_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Thu Jun 13 17:16:07 2013] Warning, spatial fit 29 centroid is now closest to src. 27
[Thu Jun 13 17:16:07 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 17:16:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 17:16:07 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 17:16:07 2013] Source does appear to be extended
[Thu Jun 13 17:16:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 17:16:25 2013] XMMSAS src. selection expression = ellipse(19509.067200, 33425.499400, 530.488215, 530.488215, 0.000000, X, Y)
[Thu Jun 13 17:16:25 2013] Not overwriting source region fullrun_pn_xmm0149900201_pi300-10000_pass1_cl_src29_src.reg
[Thu Jun 13 17:16:25 2013] Extracting stamp from image fullrun_pn_xmm0149900201_pi300-10000_cl_sm2.00.img.gz, (194, 354) - (255, 415)
[Thu Jun 13 17:16:25 2013] XMMSAS bgd. selection expression = annulus(19509.067200, 33425.499400, 884.147025, 1768.294051, X, Y)
[Thu Jun 13 17:16:25 2013] Writing fullrun_pn_xmm0149900201_pi300-10000_pass1_cl_src29.gif
[Thu Jun 13 17:16:29 2013] ../../xmm0149900201/products/events/fullrun_pn_xmm0149900201_pi300-10000_pass1_cl_src29_src.evt and ../../xmm0149900201/products/events/fullrun_pn_xmm0149900201_pi300-10000_pass1_cl_src29_bgd.evt exist, delete to re-create
[Thu Jun 13 17:16:29 2013] Mean detx,y = (518.86, 11207.21) 
[Thu Jun 13 17:16:29 2013] ../../xmm0149900201/products/images/fullrun_pn_xmm0149900201_pi300-10000_pass1_cl_src29_src.img and ../../xmm0149900201/products/images/fullrun_pn_xmm0149900201_pi300-10000_pass1_cl_src29_bgd.img exist, delete to re-create
[Thu Jun 13 17:16:29 2013] ../../xmm0149900201/products/spectra/fullrun_pn_xmm0149900201_pi300-10000_pass1_cl_src29_src_b10.pi.gz and ../../xmm0149900201/products/spectra/fullrun_pn_xmm0149900201_pi300-10000_pass1_cl_src29_bgd.pi exist, delete to re-create
[Thu Jun 13 17:16:29 2013] Setting source spectrum file to fullrun_pn_xmm0149900201_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Thu Jun 13 17:16:29 2013] Setting bgd. spectrum file to fullrun_pn_xmm0149900201_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Thu Jun 13 17:16:29 2013] ../../xmm0149900201/products/lightcurves/fullrun_pn_xmm0149900201_pi300-10000_pass1_cl_src29_src.lc and ../../xmm0149900201/products/lightcurves/fullrun_pn_xmm0149900201_pi300-10000_pass1_cl_src29_bgd.lc exist, delete to re-create
[Thu Jun 13 17:16:34 2013] Not generating rmf since there are only 55 counts
[Thu Jun 13 17:16:34 2013] rmf not generated due to insufficient counts
[Thu Jun 13 17:16:34 2013] fullrun_pn_xmm0149900201_pi300-10000_pass1_cl_src29.arf exists, delete to re-create
[Thu Jun 13 17:39:35 2013] Updating aperture counts using extracted products
[Thu Jun 13 17:39:35 2013] Total counts from fullrun_pn_xmm0149900201_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 159.00
[Thu Jun 13 17:39:35 2013] Total counts from fullrun_pn_xmm0149900201_pi300-10000_pass1_cl_src29_bgd.pi.gz = 750.00
[Thu Jun 13 17:39:35 2013] Got source and background scale factors 876800.000000, 7143296.000000
[Thu Jun 13 17:39:35 2013] User source parameters:
  Position = (224.8, 384.8) = 11 35 17.94 49 13 2.3
  Extent = 8.8 (6.0-14.1)", rotation angle = 0
  Source aperture counts = 66.9 +/- 13.6
  Background aperture counts = 92.1
  Rate = 0.004 +/- 0.0008

[Thu Jun 13 17:39:40 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 17:39:40 2013] Using photon index=1.80, rate=0.00335, arf fullrun_pn_xmm0149900201_pi300-10000_pass1_cl_src29.arf
[Thu Jun 13 17:39:40 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 17:39:40 2013] Updating source flux to 1.8e-14
[Thu Jun 13 17:40:01 2013] Source 29 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jun 13 17:40:05 2013] xmm0149900201/analysis//spectral/fullrun_pn_xmm0149900201_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete