[Thu Jun 13 17:15:01 2013] Detection parameters:
  Position = (402.4, 257.1) = 11 33 59.25 49 3 43.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 135.6 +/- 13.7
  Background counts = 7.6
  Rate = 0.007 +/- 0.0008

[Thu Jun 13 17:15:02 2013] Off-axis axis estimate = 8.11'
[Thu Jun 13 17:15:24 2013] Using EEF radius (= 10.48 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 17:15:24 2013] Initial guess for spatial extent in simple fitting = 10.48"
[Thu Jun 13 17:15:24 2013] source mask rpix=2.4, npix_max = 33, mask sum = 22, frac = 0.649
[Thu Jun 13 17:15:24 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 10.48"
[Thu Jun 13 17:15:24 2013] fullrun_mos2_xmm0149900201_pi300-10000_cl_pass0_src11.ximg exists
[Thu Jun 13 17:15:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149900201_pi300-10000_cl_pass0_src11.csv
[Thu Jun 13 17:15:25 2013] fullrun_mos2_xmm0149900201_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu Jun 13 17:15:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149900201_pi300-10000_cl_pass0_src11.csv
[Thu Jun 13 17:15:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0149900201_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0149900201_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 17:15:25 2013] fullrun_mos2_xmm0149900201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu Jun 13 17:15:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149900201_pi300-10000_cl_pass0_tfrozen_src11.csv
[Thu Jun 13 17:15:25 2013] fullrun_mos2_xmm0149900201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Jun 13 17:15:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149900201_pi300-10000_cl_pass0_tfrozen_src11.csv
[Thu Jun 13 17:15:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0149900201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0149900201_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 17:15:43 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 12.510385 pixels away
[Thu Jun 13 17:15:43 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 17:15:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 17:15:43 2013] Assessing source extent using major
[Thu Jun 13 17:15:43 2013] Source does appear to be extended
[Thu Jun 13 17:15:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 17:15:57 2013] Using EEF radius (= 10.48 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 17:15:57 2013] Initial guess for spatial extent in simple fitting = 10.48"
[Thu Jun 13 17:15:57 2013] source mask rpix=2.4, npix_max = 33, mask sum = 22, frac = 0.649
[Thu Jun 13 17:15:57 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 10.48"
[Thu Jun 13 17:15:58 2013] fullrun_mos2_xmm0149900201_pi300-10000_cl_pass1_src11.ximg exists
[Thu Jun 13 17:15:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149900201_pi300-10000_cl_pass1_src11.csv
[Thu Jun 13 17:15:58 2013] fullrun_mos2_xmm0149900201_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu Jun 13 17:15:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149900201_pi300-10000_cl_pass1_src11.csv
[Thu Jun 13 17:15:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0149900201_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0149900201_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 17:15:58 2013] fullrun_mos2_xmm0149900201_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu Jun 13 17:15:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149900201_pi300-10000_cl_pass1_tfrozen_src11.csv
[Thu Jun 13 17:15:58 2013] fullrun_mos2_xmm0149900201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Jun 13 17:15:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149900201_pi300-10000_cl_pass1_tfrozen_src11.csv
[Thu Jun 13 17:15:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0149900201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0149900201_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 17:16:15 2013] Spatial fit model total counts = 228.475000, observed total counts = 182.000000
[Thu Jun 13 17:16:15 2013] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 13 17:16:15 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 17:16:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 17:16:15 2013] Assessing source extent using major
[Thu Jun 13 17:16:15 2013] Source does appear to be extended
[Thu Jun 13 17:16:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 17:16:37 2013] XMMSAS src. selection expression = ellipse(34958.143585, 22316.256104, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 13 17:16:37 2013] Not overwriting source region fullrun_mos2_xmm0149900201_pi300-10000_pass1_cl_src13_src.reg
[Thu Jun 13 17:16:37 2013] Extracting stamp from image fullrun_mos2_xmm0149900201_pi300-10000_cl_sm2.00.img.gz, (365, 220) - (440, 295)
[Thu Jun 13 17:16:37 2013] XMMSAS bgd. selection expression = annulus(34958.143585, 22316.256104, 1087.500000, 2175.000000, X, Y) && !ellipse(33163.485400, 21746.121200, 305.588809, 305.588809, 0.000000, X, Y)
[Thu Jun 13 17:16:37 2013] Writing fullrun_mos2_xmm0149900201_pi300-10000_pass1_cl_src13.gif
[Thu Jun 13 17:16:38 2013] ../../xmm0149900201/products/events/fullrun_mos2_xmm0149900201_pi300-10000_pass1_cl_src13_src.evt and ../../xmm0149900201/products/events/fullrun_mos2_xmm0149900201_pi300-10000_pass1_cl_src13_bgd.evt exist, delete to re-create
[Thu Jun 13 17:16:38 2013] Mean detx,y = (7119.72, 6086.21) 
[Thu Jun 13 17:16:38 2013] ../../xmm0149900201/products/images/fullrun_mos2_xmm0149900201_pi300-10000_pass1_cl_src13_src.img and ../../xmm0149900201/products/images/fullrun_mos2_xmm0149900201_pi300-10000_pass1_cl_src13_bgd.img exist, delete to re-create
[Thu Jun 13 17:16:38 2013] ../../xmm0149900201/products/spectra/fullrun_mos2_xmm0149900201_pi300-10000_pass1_cl_src13_src_b10.pi.gz and ../../xmm0149900201/products/spectra/fullrun_mos2_xmm0149900201_pi300-10000_pass1_cl_src13_bgd.pi exist, delete to re-create
[Thu Jun 13 17:16:38 2013] Setting source spectrum file to fullrun_mos2_xmm0149900201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Jun 13 17:16:38 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0149900201_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Thu Jun 13 17:16:38 2013] ../../xmm0149900201/products/lightcurves/fullrun_mos2_xmm0149900201_pi300-10000_pass1_cl_src13_src.lc and ../../xmm0149900201/products/lightcurves/fullrun_mos2_xmm0149900201_pi300-10000_pass1_cl_src13_bgd.lc exist, delete to re-create
[Thu Jun 13 17:37:41 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 13 17:37:41 2013] rmf not generated due to insufficient counts
[Thu Jun 13 17:39:48 2013] Updating aperture counts using extracted products
[Thu Jun 13 17:39:48 2013] Total counts from fullrun_mos2_xmm0149900201_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 155.00
[Thu Jun 13 17:39:48 2013] Total counts from fullrun_mos2_xmm0149900201_pi300-10000_pass1_cl_src13_bgd.pi.gz = 403.00
[Thu Jun 13 17:39:48 2013] Got source and background scale factors 861814.000000, 9454772.000000
[Thu Jun 13 17:39:48 2013] User source parameters:
  Position = (402.4, 257.1) = 11 33 59.25 49 3 43.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 118.3 +/- 13.5
  Background aperture counts = 36.7
  Rate = 0.007 +/- 0.0007

[Thu Jun 13 17:39:48 2013] Updating counts from extracted products
[Thu Jun 13 17:39:48 2013] Set source signif. to 118.27/6.06 = 19.51
[Thu Jun 13 17:39:50 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 17:39:50 2013] Using photon index=1.80, rate=0.00651, arf fullrun_mos2_xmm0149900201_pi300-10000_pass1_cl_src13.arf
[Thu Jun 13 17:39:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 17:39:50 2013] Updating source flux to 2e-13
[Thu Jun 13 17:39:57 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 13 17:40:01 2013] xmm0149900201/analysis//spectral/fullrun_mos2_xmm0149900201_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete