[Thu Jun 13 17:15:01 2013] Detection parameters:
  Position = (339.5, 322.3) = 11 34 27.04 49 8 31.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.7 +/- 11.5
  Background counts = 11.2
  Rate = 0.005 +/- 0.0008

[Thu Jun 13 17:15:02 2013] Off-axis axis estimate = 3.45'
[Thu Jun 13 17:15:24 2013] Using EEF radius (= 8.15 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 17:15:24 2013] Initial guess for spatial extent in simple fitting = 8.15"
[Thu Jun 13 17:15:24 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.109
[Thu Jun 13 17:15:24 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 8.15"
[Thu Jun 13 17:15:25 2013] fullrun_mos2_xmm0149900201_pi300-10000_cl_pass0_src13.ximg exists
[Thu Jun 13 17:15:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149900201_pi300-10000_cl_pass0_src13.csv
[Thu Jun 13 17:15:25 2013] fullrun_mos2_xmm0149900201_pi300-10000_cl_pass0_src13_1.ximg exists
[Thu Jun 13 17:15:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149900201_pi300-10000_cl_pass0_src13.csv
[Thu Jun 13 17:15:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0149900201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0149900201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 17:15:25 2013] fullrun_mos2_xmm0149900201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Thu Jun 13 17:15:26 2013] fullrun_mos2_xmm0149900201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Thu Jun 13 17:15:26 2013] Fit fullrun_mos2_xmm0149900201_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Thu Jun 13 17:15:43 2013] Spatial fit model total counts = 180.052000, observed total counts = 180.000000
[Thu Jun 13 17:15:43 2013] Offset between fit and detection position for source 10 = 0.236599 pixels
[Thu Jun 13 17:15:43 2013] 180.437600 total counts/ 133.416000 bgd. counts: snr = 4.070928
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.236599 pixels
  Position = (339.3, 322.5) = 11 34 27.13 49 8 31.5
  Extent = 5.0 (3.7-6.0)", rotation angle = 0
  Source counts = 47.0 +/- 13.4
  Background counts = 133.4
  Rate = 0.003 +/- 0.0007
[Thu Jun 13 17:15:43 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 17:15:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 17:15:43 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 17:15:43 2013] Source does appear to be extended
[Thu Jun 13 17:15:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 17:15:57 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 13 17:15:57 2013] Initial guess for spatial extent in simple fitting = 4.96"
[Thu Jun 13 17:15:57 2013] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.836
[Thu Jun 13 17:15:57 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 4.96"
[Thu Jun 13 17:15:58 2013] fullrun_mos2_xmm0149900201_pi300-10000_cl_pass1_src13.ximg exists
[Thu Jun 13 17:15:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149900201_pi300-10000_cl_pass1_src13.csv
[Thu Jun 13 17:15:58 2013] fullrun_mos2_xmm0149900201_pi300-10000_cl_pass1_src13_1.ximg exists
[Thu Jun 13 17:15:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149900201_pi300-10000_cl_pass1_src13.csv
[Thu Jun 13 17:15:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0149900201_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0149900201_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 17:15:58 2013] fullrun_mos2_xmm0149900201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Thu Jun 13 17:15:58 2013] fullrun_mos2_xmm0149900201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Thu Jun 13 17:15:58 2013] Fit fullrun_mos2_xmm0149900201_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Thu Jun 13 17:16:15 2013] Spatial fit model total counts = 180.492000, observed total counts = 180.000000
[Thu Jun 13 17:16:15 2013] Offset between fit and detection position for source 10 = 0.010617 pixels
[Thu Jun 13 17:16:15 2013] 180.697700 total counts/ 133.627000 bgd. counts: snr = 4.071960
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.010617 pixels
  Position = (339.3, 322.5) = 11 34 27.13 49 8 31.5
  Extent = 5.0 (3.7-6.0)", rotation angle = 0
  Source counts = 47.1 +/- 13.4
  Background counts = 133.6
  Rate = 0.003 +/- 0.0007
[Thu Jun 13 17:16:15 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 17:16:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 17:16:15 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 17:16:15 2013] Source does appear to be extended
[Thu Jun 13 17:16:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 17:16:37 2013] XMMSAS src. selection expression = ellipse(29471.576600, 28004.672800, 297.889209, 297.889209, 0.000000, X, Y)
[Thu Jun 13 17:16:37 2013] Not overwriting source region fullrun_mos2_xmm0149900201_pi300-10000_pass1_cl_src10_src.reg
[Thu Jun 13 17:16:37 2013] Extracting stamp from image fullrun_mos2_xmm0149900201_pi300-10000_cl_sm2.00.img.gz, (322, 305) - (356, 340)
[Thu Jun 13 17:16:37 2013] XMMSAS bgd. selection expression = annulus(29471.576600, 28004.672800, 496.482014, 992.964029, X, Y) && !ellipse(29716.498980, 28745.174420, 353.812810, 353.812810, 0.000000, X, Y)
[Thu Jun 13 17:16:37 2013] Writing fullrun_mos2_xmm0149900201_pi300-10000_pass1_cl_src10.gif
[Thu Jun 13 17:16:54 2013] Mean detx,y = (5311.45, -1590.86) 
[Thu Jun 13 17:16:55 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 17:17:02 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 17:17:02 2013] Setting source spectrum file to fullrun_mos2_xmm0149900201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Jun 13 17:17:02 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0149900201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu Jun 13 17:38:05 2013] Not generating rmf since there are only 47 counts
[Thu Jun 13 17:38:05 2013] rmf not generated due to insufficient counts
[Thu Jun 13 17:39:48 2013] Updating aperture counts using extracted products
[Thu Jun 13 17:39:48 2013] Total counts from fullrun_mos2_xmm0149900201_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 66.00
[Thu Jun 13 17:39:48 2013] Total counts from fullrun_mos2_xmm0149900201_pi300-10000_pass1_cl_src10_bgd.pi.gz = 118.00
[Thu Jun 13 17:39:48 2013] Got source and background scale factors 283200.000000, 2016000.000000
[Thu Jun 13 17:39:48 2013] User source parameters:
  Position = (339.3, 322.5) = 11 34 27.13 49 8 31.5
  Extent = 5.0 (3.7-6.0)", rotation angle = 0
  Source aperture counts = 49.4 +/- 9.2
  Background aperture counts = 16.6
  Rate = 0.003 +/- 0.0005

[Thu Jun 13 17:39:50 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 17:39:50 2013] Using photon index=1.80, rate=0.00259, arf fullrun_mos2_xmm0149900201_pi300-10000_pass1_cl_src10.arf
[Thu Jun 13 17:39:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 17:39:50 2013] Updating source flux to 4.2e-14
[Thu Jun 13 17:39:57 2013] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jun 13 17:40:01 2013] xmm0149900201/analysis//spectral/fullrun_mos2_xmm0149900201_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete