[Thu Jun 13 17:15:00 2013] Detection parameters:
  Position = (401.7, 381.2) = 11 33 59.41 49 12 47.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.7 +/- 8.7
  Background counts = 4.3
  Rate = 0.003 +/- 0.0005

[Thu Jun 13 17:15:01 2013] Off-axis axis estimate = 9.60'
[Thu Jun 13 17:15:23 2013] Using EEF radius (= 11.23 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 17:15:23 2013] Initial guess for spatial extent in simple fitting = 11.23"
[Thu Jun 13 17:15:23 2013] source mask rpix=2.6, npix_max = 37, mask sum = 35, frac = 0.922
[Thu Jun 13 17:15:23 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 11.23"
[Thu Jun 13 17:15:24 2013] fullrun_mos1_xmm0149900201_pi300-10000_cl_pass0_src20.ximg exists
[Thu Jun 13 17:15:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149900201_pi300-10000_cl_pass0_src20.csv
[Thu Jun 13 17:15:24 2013] fullrun_mos1_xmm0149900201_pi300-10000_cl_pass0_src20_1.ximg exists
[Thu Jun 13 17:15:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149900201_pi300-10000_cl_pass0_src20.csv
[Thu Jun 13 17:15:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0149900201_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0149900201_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 17:15:24 2013] fullrun_mos1_xmm0149900201_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Thu Jun 13 17:15:24 2013] fullrun_mos1_xmm0149900201_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Thu Jun 13 17:15:24 2013] Fit fullrun_mos1_xmm0149900201_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Thu Jun 13 17:15:38 2013] Spatial fit model total counts = 79.841100, observed total counts = 78.000000
[Thu Jun 13 17:15:38 2013] Offset between fit and detection position for source 2 = 0.493123 pixels
[Thu Jun 13 17:15:38 2013] 79.865400 total counts/ 37.808900 bgd. counts: snr = 6.839685
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.493123 pixels
  Position = (401.4, 380.8) = 11 33 59.55 49 12 45.0
  Extent = 7.6 (5.3-10.2)", rotation angle = 0
  Source counts = 42.1 +/- 8.9
  Background counts = 37.8
  Rate = 0.002 +/- 0.0005
[Thu Jun 13 17:15:38 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 17:15:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 17:15:38 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 17:15:38 2013] Source does appear to be extended
[Thu Jun 13 17:15:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 17:15:56 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 13 17:15:56 2013] Initial guess for spatial extent in simple fitting = 7.63"
[Thu Jun 13 17:15:56 2013] source mask rpix=1.8, npix_max = 20, mask sum = 19, frac = 0.935
[Thu Jun 13 17:15:56 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 7.63"
[Thu Jun 13 17:15:57 2013] fullrun_mos1_xmm0149900201_pi300-10000_cl_pass1_src19.ximg exists
[Thu Jun 13 17:15:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149900201_pi300-10000_cl_pass1_src19.csv
[Thu Jun 13 17:15:57 2013] fullrun_mos1_xmm0149900201_pi300-10000_cl_pass1_src19_1.ximg exists
[Thu Jun 13 17:15:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149900201_pi300-10000_cl_pass1_src19.csv
[Thu Jun 13 17:15:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0149900201_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0149900201_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 17:15:57 2013] fullrun_mos1_xmm0149900201_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Thu Jun 13 17:15:57 2013] fullrun_mos1_xmm0149900201_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Thu Jun 13 17:15:57 2013] Fit fullrun_mos1_xmm0149900201_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Thu Jun 13 17:16:11 2013] Spatial fit model total counts = 80.416500, observed total counts = 78.000000
[Thu Jun 13 17:16:11 2013] Offset between fit and detection position for source 2 = 0.054686 pixels
[Thu Jun 13 17:16:11 2013] 80.353700 total counts/ 38.390300 bgd. counts: snr = 6.772670
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.054686 pixels
  Position = (401.4, 380.9) = 11 33 59.54 49 12 45.2
  Extent = 7.4 (5.3-10.1)", rotation angle = 0
  Source counts = 42.0 +/- 9.0
  Background counts = 38.4
  Rate = 0.002 +/- 0.0005
[Thu Jun 13 17:16:11 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 17:16:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 17:16:11 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 17:16:11 2013] Source does appear to be extended
[Thu Jun 13 17:16:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 17:16:34 2013] XMMSAS src. selection expression = ellipse(34874.488000, 33089.311400, 445.129213, 445.129213, 0.000000, X, Y)
[Thu Jun 13 17:16:34 2013] Not overwriting source region fullrun_mos1_xmm0149900201_pi300-10000_pass1_cl_src2_src.reg
[Thu Jun 13 17:16:34 2013] Extracting stamp from image fullrun_mos1_xmm0149900201_pi300-10000_cl_sm2.00.img.gz, (376, 355) - (427, 406)
[Thu Jun 13 17:16:34 2013] XMMSAS bgd. selection expression = annulus(34874.488000, 33089.311400, 741.882021, 1483.764043, X, Y)
[Thu Jun 13 17:16:34 2013] Writing fullrun_mos1_xmm0149900201_pi300-10000_pass1_cl_src2.gif
[Thu Jun 13 17:16:35 2013] ../../xmm0149900201/products/events/fullrun_mos1_xmm0149900201_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0149900201/products/events/fullrun_mos1_xmm0149900201_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Thu Jun 13 17:16:35 2013] Mean detx,y = (-2929.19, -12734.81) 
[Thu Jun 13 17:16:35 2013] ../../xmm0149900201/products/images/fullrun_mos1_xmm0149900201_pi300-10000_pass1_cl_src2_src.img and ../../xmm0149900201/products/images/fullrun_mos1_xmm0149900201_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Thu Jun 13 17:16:35 2013] ../../xmm0149900201/products/spectra/fullrun_mos1_xmm0149900201_pi300-10000_pass1_cl_src2_src_b10.pi.gz and ../../xmm0149900201/products/spectra/fullrun_mos1_xmm0149900201_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Thu Jun 13 17:16:35 2013] Setting source spectrum file to fullrun_mos1_xmm0149900201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jun 13 17:16:35 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0149900201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Jun 13 17:16:35 2013] ../../xmm0149900201/products/lightcurves/fullrun_mos1_xmm0149900201_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0149900201/products/lightcurves/fullrun_mos1_xmm0149900201_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create
[Thu Jun 13 17:16:37 2013] Not generating rmf since there are only 41 counts
[Thu Jun 13 17:16:37 2013] rmf not generated due to insufficient counts
[Thu Jun 13 17:16:37 2013] fullrun_mos1_xmm0149900201_pi300-10000_pass1_cl_src2.arf exists, delete to re-create
[Thu Jun 13 17:39:43 2013] Updating aperture counts using extracted products
[Thu Jun 13 17:39:43 2013] Total counts from fullrun_mos1_xmm0149900201_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 54.00
[Thu Jun 13 17:39:43 2013] Total counts from fullrun_mos1_xmm0149900201_pi300-10000_pass1_cl_src2_bgd.pi.gz = 114.00
[Thu Jun 13 17:39:43 2013] Got source and background scale factors 571244.000000, 5090064.000000
[Thu Jun 13 17:39:43 2013] User source parameters:
  Position = (401.4, 380.9) = 11 33 59.54 49 12 45.2
  Extent = 7.4 (5.3-10.1)", rotation angle = 0
  Source aperture counts = 41.2 +/- 8.4
  Background aperture counts = 12.8
  Rate = 0.002 +/- 0.0005

[Thu Jun 13 17:39:46 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 17:39:46 2013] Using photon index=1.80, rate=0.00231, arf fullrun_mos1_xmm0149900201_pi300-10000_pass1_cl_src2.arf
[Thu Jun 13 17:39:46 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 17:39:46 2013] Updating source flux to 6.6e-14
[Thu Jun 13 17:39:52 2013] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jun 13 17:39:57 2013] xmm0149900201/analysis//spectral/fullrun_mos1_xmm0149900201_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete