[Thu Jun 13 17:15:01 2013] Detection parameters:
  Position = (288.9, 269.1) = 11 34 49.45 49 4 40.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 251.1 +/- 20.5
  Background counts = 21.4
  Rate = 0.01 +/- 0.001

[Thu Jun 13 17:15:01 2013] Off-axis axis estimate = 2.24'
[Thu Jun 13 17:15:23 2013] Using EEF radius (= 7.55 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 17:15:23 2013] Initial guess for spatial extent in simple fitting = 7.55"
[Thu Jun 13 17:15:23 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.801
[Thu Jun 13 17:15:23 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.55"
[Thu Jun 13 17:15:23 2013] fullrun_mos1_xmm0149900201_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jun 13 17:15:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149900201_pi300-10000_cl_pass0_src3.csv
[Thu Jun 13 17:15:23 2013] fullrun_mos1_xmm0149900201_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jun 13 17:15:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149900201_pi300-10000_cl_pass0_src3.csv
[Thu Jun 13 17:15:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0149900201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0149900201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 17:15:24 2013] fullrun_mos1_xmm0149900201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jun 13 17:15:24 2013] fullrun_mos1_xmm0149900201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jun 13 17:15:24 2013] Fit fullrun_mos1_xmm0149900201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Jun 13 17:15:38 2013] Spatial fit model total counts = 559.059000, observed total counts = 557.000000
[Thu Jun 13 17:15:38 2013] Offset between fit and detection position for source 12 = 0.062976 pixels
[Thu Jun 13 17:15:38 2013] 561.178000 total counts/ 410.256000 bgd. counts: snr = 7.451180
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.062976 pixels
  Position = (288.9, 269.1) = 11 34 49.48 49 4 39.3
  Extent = 5.4 (4.5-6.4)", rotation angle = 0
  Source counts = 150.9 +/- 23.7
  Background counts = 410.3
  Rate = 0.008 +/- 0.001
[Thu Jun 13 17:15:38 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 17:15:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 17:15:38 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 17:15:38 2013] Source does appear to be extended
[Thu Jun 13 17:15:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 17:15:38 2013] Source is confused with source 11
[Thu Jun 13 17:15:56 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 13 17:15:56 2013] Initial guess for spatial extent in simple fitting = 5.40"
[Thu Jun 13 17:15:56 2013] source mask rpix=1.2, npix_max = 12, mask sum = 16, frac = 1.318
[Thu Jun 13 17:15:56 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 5.40"
[Thu Jun 13 17:15:57 2013] fullrun_mos1_xmm0149900201_pi300-10000_cl_pass1_src3.ximg exists
[Thu Jun 13 17:15:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149900201_pi300-10000_cl_pass1_src3.csv
[Thu Jun 13 17:15:57 2013] fullrun_mos1_xmm0149900201_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Jun 13 17:15:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149900201_pi300-10000_cl_pass1_src3.csv
[Thu Jun 13 17:15:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0149900201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0149900201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 17:15:57 2013] fullrun_mos1_xmm0149900201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Jun 13 17:15:57 2013] fullrun_mos1_xmm0149900201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Jun 13 17:15:57 2013] Fit fullrun_mos1_xmm0149900201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Jun 13 17:16:11 2013] Spatial fit model total counts = 559.857000, observed total counts = 557.000000
[Thu Jun 13 17:16:11 2013] Offset between fit and detection position for source 12 = 0.003325 pixels
[Thu Jun 13 17:16:11 2013] 561.953000 total counts/ 410.352000 bgd. counts: snr = 7.483828
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.003325 pixels
  Position = (288.9, 269.1) = 11 34 49.48 49 4 39.3
  Extent = 5.4 (4.5-6.4)", rotation angle = 0
  Source counts = 151.6 +/- 23.7
  Background counts = 410.4
  Rate = 0.008 +/- 0.001
[Thu Jun 13 17:16:11 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 17:16:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 17:16:11 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 17:16:11 2013] Source does appear to be extended
[Thu Jun 13 17:16:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 17:16:34 2013] XMMSAS src. selection expression = ellipse(25084.290700, 23359.813400, 325.216809, 325.216809, 0.000000, X, Y)
[Thu Jun 13 17:16:34 2013] Not overwriting source region fullrun_mos1_xmm0149900201_pi300-10000_pass1_cl_src12_src.reg
[Thu Jun 13 17:16:34 2013] Extracting stamp from image fullrun_mos1_xmm0149900201_pi300-10000_cl_sm2.00.img.gz, (270, 250) - (308, 288)
[Thu Jun 13 17:16:34 2013] XMMSAS bgd. selection expression = annulus(25084.290700, 23359.813400, 542.028016, 1084.056031, X, Y) && !ellipse(24920.363534, 21907.232000, 432.741612, 432.741612, 0.000000, X, Y) && !ellipse(24914.412018, 23978.771729, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 13 17:16:34 2013] Writing fullrun_mos1_xmm0149900201_pi300-10000_pass1_cl_src12.gif
[Thu Jun 13 17:16:34 2013] ../../xmm0149900201/products/events/fullrun_mos1_xmm0149900201_pi300-10000_pass1_cl_src12_src.evt and ../../xmm0149900201/products/events/fullrun_mos1_xmm0149900201_pi300-10000_pass1_cl_src12_bgd.evt exist, delete to re-create
[Thu Jun 13 17:16:34 2013] Mean detx,y = (350.12, 666.13) 
[Thu Jun 13 17:16:34 2013] ../../xmm0149900201/products/images/fullrun_mos1_xmm0149900201_pi300-10000_pass1_cl_src12_src.img and ../../xmm0149900201/products/images/fullrun_mos1_xmm0149900201_pi300-10000_pass1_cl_src12_bgd.img exist, delete to re-create
[Thu Jun 13 17:16:34 2013] ../../xmm0149900201/products/spectra/fullrun_mos1_xmm0149900201_pi300-10000_pass1_cl_src12_src_b10.pi.gz and ../../xmm0149900201/products/spectra/fullrun_mos1_xmm0149900201_pi300-10000_pass1_cl_src12_bgd.pi exist, delete to re-create
[Thu Jun 13 17:16:34 2013] Setting source spectrum file to fullrun_mos1_xmm0149900201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Jun 13 17:16:34 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0149900201_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Thu Jun 13 17:16:34 2013] ../../xmm0149900201/products/lightcurves/fullrun_mos1_xmm0149900201_pi300-10000_pass1_cl_src12_src.lc and ../../xmm0149900201/products/lightcurves/fullrun_mos1_xmm0149900201_pi300-10000_pass1_cl_src12_bgd.lc exist, delete to re-create
[Thu Jun 13 17:16:37 2013] fullrun_mos1_xmm0149900201_pi300-10000_pass1_cl_src12.rmf exists, delete to re-create
[Thu Jun 13 17:16:37 2013] fullrun_mos1_xmm0149900201_pi300-10000_pass1_cl_src12.arf exists, delete to re-create
[Thu Jun 13 17:39:41 2013] Updating aperture counts using extracted products
[Thu Jun 13 17:39:41 2013] Total counts from fullrun_mos1_xmm0149900201_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 223.00
[Thu Jun 13 17:39:41 2013] Total counts from fullrun_mos1_xmm0149900201_pi300-10000_pass1_cl_src12_bgd.pi.gz = 261.00
[Thu Jun 13 17:39:41 2013] Got source and background scale factors 332800.000000, 1676800.000000
[Thu Jun 13 17:39:41 2013] User source parameters:
  Position = (288.9, 269.1) = 11 34 49.48 49 4 39.3
  Extent = 5.4 (4.5-6.4)", rotation angle = 0
  Source aperture counts = 171.2 +/- 16.0
  Background aperture counts = 51.8
  Rate = 0.009 +/- 0.0009

[Thu Jun 13 17:39:45 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 17:39:45 2013] Using photon index=1.80, rate=0.00835, arf fullrun_mos1_xmm0149900201_pi300-10000_pass1_cl_src12.arf
[Thu Jun 13 17:39:45 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 17:39:45 2013] Updating source flux to 1e-13
[Thu Jun 13 17:39:52 2013] Flag c found in src. 12 procflags, skipping spectral fitting
[Thu Jun 13 17:39:57 2013] xmm0149900201/analysis//spectral/fullrun_mos1_xmm0149900201_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete