[Fri May 18 13:29:54 2012] Detection parameters:
  Position = (264.7, 315.8) = 1 57 57.77 37 48 23.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 314.1 +/- 23.0
  Background counts = 32.1
  Rate = 0.008 +/- 0.0006

[Fri May 18 13:29:55 2012] Off-axis axis estimate = 2.75'
[Fri May 18 15:36:43 2012] Using EEF radius (= 7.80 ")to estimate initial spatial extent for simple fitting
[Fri May 18 15:36:43 2012] Initial guess for spatial extent in simple fitting = 7.80"
[Fri May 18 15:36:43 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.950
[Fri May 18 15:36:43 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 7.80"
[Fri May 18 16:41:21 2012] fullrun_mos1_xmm0149780101_pi300-10000_cl_pass0_src7.ximg exists
[Fri May 18 16:41:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149780101_pi300-10000_cl_pass0_src7.csv
[Fri May 18 16:41:21 2012] fullrun_mos1_xmm0149780101_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri May 18 16:41:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149780101_pi300-10000_cl_pass0_src7.csv
[Fri May 18 16:41:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0149780101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0149780101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 16:41:22 2012] fullrun_mos1_xmm0149780101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri May 18 16:41:22 2012] fullrun_mos1_xmm0149780101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri May 18 16:41:22 2012] Fit fullrun_mos1_xmm0149780101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri May 18 17:52:51 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 10.832532 pixels away
[Fri May 18 17:52:51 2012] Vigneting correction estimate = 1.000000
[Fri May 18 17:52:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 17:52:51 2012] Assessing source extent using major
[Fri May 18 17:52:51 2012] Source does appear to be extended
[Fri May 18 17:52:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 19:27:14 2012] Using EEF radius (= 7.80 ")to estimate initial spatial extent for simple fitting
[Fri May 18 19:27:14 2012] Initial guess for spatial extent in simple fitting = 7.80"
[Fri May 18 19:27:14 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.950
[Fri May 18 19:27:14 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 7.80"
[Fri May 18 20:18:17 2012] fullrun_mos1_xmm0149780101_pi300-10000_cl_pass1_src7.ximg exists
[Fri May 18 20:18:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149780101_pi300-10000_cl_pass1_src7.csv
[Fri May 18 20:18:17 2012] fullrun_mos1_xmm0149780101_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri May 18 20:18:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149780101_pi300-10000_cl_pass1_src7.csv
[Fri May 18 20:18:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0149780101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0149780101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 20:18:17 2012] fullrun_mos1_xmm0149780101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri May 18 20:18:17 2012] fullrun_mos1_xmm0149780101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri May 18 20:18:17 2012] Fit fullrun_mos1_xmm0149780101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Fri May 18 21:03:18 2012] Source 18 is offset by 6.870185 and 5.977332 pixels which is larger than
2 X fitted extent = 0.897035 x 0.897035, not incorporating fit results
[Fri May 18 21:03:18 2012] Vigneting correction estimate = 1.000000
[Fri May 18 21:03:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 21:03:18 2012] Assessing source extent using major
[Fri May 18 21:03:18 2012] Source does appear to be extended
[Fri May 18 21:03:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 22:51:51 2012] XMMSAS src. selection expression = ellipse(22979.870056, 27426.191864, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 18 22:51:51 2012] Writing source region out to fullrun_mos1_xmm0149780101_pi300-10000_pass1_cl_src18_src.reg
[Fri May 18 22:51:51 2012] Extracting stamp from image fullrun_mos1_xmm0149780101_pi300-10000_cl_sm2.00.img.gz, (227, 278) - (302, 353)
[Fri May 18 22:51:51 2012] XMMSAS bgd. selection expression = annulus(22979.870056, 27426.191864, 1087.500000, 2175.000000, X, Y) && !ellipse(24937.243600, 28425.173800, 434.939213, 434.939213, 0.000000, X, Y)
[Fri May 18 22:51:51 2012] Writing fullrun_mos1_xmm0149780101_pi300-10000_pass1_cl_src18.gif
[Fri May 18 22:53:34 2012] Mean detx,y = (-1292.76, -4661.41) 
[Fri May 18 22:53:35 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 18 22:53:47 2012] Binned source spectrum to 10 counts/bin
[Fri May 18 22:53:47 2012] Setting source spectrum file to fullrun_mos1_xmm0149780101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Fri May 18 22:53:47 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0149780101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Fri May 18 23:24:45 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 18 23:24:45 2012] rmf not generated due to insufficient counts
[Sat May 19 00:49:50 2012] Updating aperture counts using extracted products
[Sat May 19 00:49:50 2012] Error reading totcts from fullrun_mos1_xmm0149780101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat May 19 00:49:51 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 19 00:49:51 2012] Using photon index=1.80, rate=0.00797, arf fullrun_mos1_xmm0149780101_pi300-10000_pass1_cl_src18.arf
[Sat May 19 00:49:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 19 00:49:51 2012] Updating source flux to 1e-13
[Sat May 19 00:49:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting