[Fri May 18 10:28:05 2012] Detection parameters:
  Position = (317.1, 260.6) = 22 46 18.95 -52 46 42.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 127.9 +/- 23.5
  Background counts = 193.6
  Rate = 0.006 +/- 0.001

[Fri May 18 10:28:06 2012] Off-axis axis estimate = 3.05'
[Fri May 18 10:34:34 2012] Using EEF radius (= 7.96 ")to estimate initial spatial extent for simple fitting
[Fri May 18 10:34:34 2012] Initial guess for spatial extent in simple fitting = 7.96"
[Fri May 18 10:34:34 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.922
[Fri May 18 10:34:34 2012] Giving source the simple spatial ID 72 for pass 0, mean size = 7.96"
[Fri May 18 17:50:34 2012] fullrun_pn_xmm0149670301_pi300-10000_cl_pass0_src72.ximg exists
[Fri May 18 17:50:34 2012] fullrun_pn_xmm0149670301_pi300-10000_cl_pass0_src72_1.ximg exists
[Fri May 18 17:50:34 2012] Fit fullrun_pn_xmm0149670301_pi300-10000_cl_pass0_src72 appears to have run properly
[Fri May 18 17:50:38 2012] fullrun_pn_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src72.ximg exists
[Fri May 18 17:50:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src72.csv
[Fri May 18 17:50:38 2012] fullrun_pn_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src72_1.ximg exists
[Fri May 18 17:50:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src72.csv
[Fri May 18 17:50:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src72_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 01:57:50 2012] Warning, spatial fit 72 centroid is now closest to src. 63
[Sat May 19 01:57:51 2012] Vigneting correction estimate = 1.000000
[Sat May 19 01:57:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 01:57:51 2012] Assessing source extent using major
[Sat May 19 01:57:51 2012] Source does appear to be extended
[Sat May 19 01:57:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 01:58:35 2012] Using EEF radius (= 7.96 ")to estimate initial spatial extent for simple fitting
[Sat May 19 01:58:35 2012] Initial guess for spatial extent in simple fitting = 7.96"
[Sat May 19 01:58:35 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.922
[Sat May 19 01:58:35 2012] Giving source the simple spatial ID 53 for pass 1, mean size = 7.96"
[Sat May 19 08:40:59 2012] fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_src53.ximg exists
[Sat May 19 08:40:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_src53.csv
[Sat May 19 08:40:59 2012] fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_src53_1.ximg exists
[Sat May 19 08:40:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_src53.csv
[Sat May 19 08:40:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 08:41:01 2012] fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Sat May 19 08:41:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src53.csv
[Sat May 19 08:41:01 2012] fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Sat May 19 08:41:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src53.csv
[Sat May 19 08:41:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 15:53:49 2012] Warning, spatial fit 53 centroid is now closest to src. 70
[Sat May 19 15:53:49 2012] Vigneting correction estimate = 1.000000
[Sat May 19 15:53:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 15:53:49 2012] Assessing source extent using major
[Sat May 19 15:53:49 2012] Source does appear to be extended
[Sat May 19 15:53:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 15:54:26 2012] XMMSAS src. selection expression = ellipse(27537.721680, 22628.030884, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 19 15:54:26 2012] Writing source region out to fullrun_pn_xmm0149670301_pi300-10000_pass1_cl_src73_src.reg
[Sat May 19 15:54:26 2012] Extracting stamp from image fullrun_pn_xmm0149670301_pi300-10000_cl_sm2.00.img.gz, (280, 223) - (355, 298)
[Sat May 19 15:54:26 2012] XMMSAS bgd. selection expression = annulus(27537.721680, 22628.030884, 1087.500000, 2175.000000, X, Y) && !ellipse(27345.208000, 26021.956000, 2185.120063, 2185.120063, 0.000000, X, Y) && !ellipse(29818.075897, 25408.197021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28998.245331, 25095.641663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27637.603882, 25190.256287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27054.852000, 25488.852000, 1125.296032, 1125.296032, 32.692000, X, Y) && !ellipse(25613.563538, 25089.025330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26662.525787, 24922.331970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25162.882000, 24189.252000, 1114.496032, 1114.496032, 0.000000, X, Y) && !ellipse(27483.105200, 24291.734800, 1530.160044, 1530.160044, 0.000000, X, Y) && !ellipse(29133.604034, 24395.659119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28265.961700, 23880.774597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27060.995239, 24055.748993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25919.359000, 23911.348600, 1159.008033, 1159.008033, 0.000000, X, Y) && !ellipse(26653.825256, 23619.222351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28264.100525, 23465.060730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27631.181366, 23452.621918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26819.947784, 23012.611877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28205.113739, 22838.441956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24289.704000, 23693.256000, 1164.304034, 1164.304034, 356.982000, X, Y) && !ellipse(25349.731200, 23923.574000, 588.513617, 588.513617, 0.000000, X, Y) && !ellipse(25938.610600, 23822.996000, 1187.392034, 1187.392034, 0.000000, X, Y) && !ellipse(26957.226074, 21571.335861, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 19 15:54:26 2012] Writing fullrun_pn_xmm0149670301_pi300-10000_pass1_cl_src73.gif
[Sat May 19 16:53:55 2012] Mean detx,y = (2317.79, 2772.66) 
[Sat May 19 16:53:58 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 19 16:54:16 2012] Binned source spectrum to 10 counts/bin
[Sat May 19 16:54:17 2012] Setting source spectrum file to fullrun_pn_xmm0149670301_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Sat May 19 16:54:17 2012] Setting bgd. spectrum file to fullrun_pn_xmm0149670301_pi300-10000_pass1_cl_src73_bgd.pi.gz
[Sun May 20 19:44:43 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 20 19:44:43 2012] rmf not generated due to insufficient counts
[Mon May 21 00:11:26 2012] Updating aperture counts using extracted products
[Mon May 21 00:11:26 2012] Error reading totcts from fullrun_pn_xmm0149670301_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Mon May 21 00:11:30 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 00:11:30 2012] Using photon index=1.80, rate=0.00604, arf fullrun_pn_xmm0149670301_pi300-10000_pass1_cl_src73.arf
[Mon May 21 00:11:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 00:11:30 2012] Updating source flux to 1.7e-14
[Mon May 21 00:16:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting