[Fri May 18 10:28:03 2012] Detection parameters:
  Position = (346.5, 305.0) = 22 46 4.87 -52 43 28.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.8 +/- 24.4
  Background counts = 243.8
  Rate = 0.005 +/- 0.001

[Fri May 18 10:28:06 2012] Off-axis axis estimate = 3.52'
[Fri May 18 10:34:34 2012] Using EEF radius (= 8.19 ")to estimate initial spatial extent for simple fitting
[Fri May 18 10:34:34 2012] Initial guess for spatial extent in simple fitting = 8.19"
[Fri May 18 10:34:34 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.881
[Fri May 18 10:34:34 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 8.19"
[Fri May 18 17:50:33 2012] fullrun_pn_xmm0149670301_pi300-10000_cl_pass0_src32.ximg exists
[Fri May 18 17:50:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149670301_pi300-10000_cl_pass0_src32.csv
[Fri May 18 17:50:33 2012] fullrun_pn_xmm0149670301_pi300-10000_cl_pass0_src32_1.ximg exists
[Fri May 18 17:50:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149670301_pi300-10000_cl_pass0_src32.csv
[Fri May 18 17:50:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0149670301_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0149670301_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 17:50:36 2012] fullrun_pn_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Fri May 18 17:50:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src32.csv
[Fri May 18 17:50:36 2012] fullrun_pn_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Fri May 18 17:50:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src32.csv
[Fri May 18 17:50:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 01:57:50 2012] Warning, spatial fit 32 centroid is now closest to src. 36
[Sat May 19 01:57:51 2012] Vigneting correction estimate = 1.000000
[Sat May 19 01:57:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 01:57:51 2012] Assessing source extent using major
[Sat May 19 01:57:51 2012] Source does appear to be extended
[Sat May 19 01:57:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 01:58:35 2012] Using EEF radius (= 8.19 ")to estimate initial spatial extent for simple fitting
[Sat May 19 01:58:35 2012] Initial guess for spatial extent in simple fitting = 8.19"
[Sat May 19 01:58:35 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.881
[Sat May 19 01:58:35 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 8.19"
[Sat May 19 08:40:57 2012] fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_src21.ximg exists
[Sat May 19 08:40:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_src21.csv
[Sat May 19 08:40:57 2012] fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_src21_1.ximg exists
[Sat May 19 08:40:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_src21.csv
[Sat May 19 08:40:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 08:41:00 2012] fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sat May 19 08:41:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src21.csv
[Sat May 19 08:41:00 2012] fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sat May 19 08:41:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src21.csv
[Sat May 19 08:41:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 15:53:49 2012] Warning, spatial fit 21 centroid is now closest to src. 38
[Sat May 19 15:53:49 2012] Vigneting correction estimate = 1.000000
[Sat May 19 15:53:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 15:53:49 2012] Assessing source extent using major
[Sat May 19 15:53:49 2012] Source does appear to be extended
[Sat May 19 15:53:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 15:54:24 2012] XMMSAS src. selection expression = ellipse(30098.481506, 26484.224640, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 19 15:54:24 2012] Writing source region out to fullrun_pn_xmm0149670301_pi300-10000_pass1_cl_src33_src.reg
[Sat May 19 15:54:24 2012] Extracting stamp from image fullrun_pn_xmm0149670301_pi300-10000_cl_sm2.00.img.gz, (309, 267) - (384, 342)
[Sat May 19 15:54:25 2012] XMMSAS bgd. selection expression = annulus(30098.481506, 26484.224640, 1087.500000, 2175.000000, X, Y) && !ellipse(28340.191010, 28755.530518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29448.705566, 27969.474579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28151.575073, 27886.117279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27270.907166, 27512.363495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28633.438995, 27463.253418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30172.947113, 27330.512573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27286.733795, 26653.591614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28142.828200, 26716.722400, 1178.176034, 1178.176034, 0.000000, X, Y) && !ellipse(29403.965668, 26614.190979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26976.644000, 25978.756000, 1115.640032, 1115.640032, 0.000000, X, Y) && !ellipse(28916.770447, 26129.040131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27345.208000, 26021.956000, 2185.120063, 2185.120063, 0.000000, X, Y) && !ellipse(29818.075897, 25408.197021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27595.490000, 26069.214000, 1125.296032, 1125.296032, 0.000000, X, Y) && !ellipse(28998.245331, 25095.641663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27637.603882, 25190.256287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27054.852000, 25488.852000, 1125.296032, 1125.296032, 32.692000, X, Y) && !ellipse(27483.105200, 24291.734800, 1530.160044, 1530.160044, 0.000000, X, Y) && !ellipse(29133.604034, 24395.659119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28265.961700, 23880.774597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27060.995239, 24055.748993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28264.100525, 23465.060730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27631.181366, 23452.621918, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 19 15:54:25 2012] Writing fullrun_pn_xmm0149670301_pi300-10000_pass1_cl_src33.gif
[Sat May 19 16:14:48 2012] Mean detx,y = (1584.44, -1776.09) 
[Sat May 19 16:14:52 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 19 16:15:25 2012] Binned source spectrum to 10 counts/bin
[Sat May 19 16:15:26 2012] Setting source spectrum file to fullrun_pn_xmm0149670301_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sat May 19 16:15:26 2012] Setting bgd. spectrum file to fullrun_pn_xmm0149670301_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Sat May 19 17:22:14 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 19 17:22:14 2012] rmf not generated due to insufficient counts
[Mon May 21 00:11:24 2012] Updating aperture counts using extracted products
[Mon May 21 00:11:24 2012] Error reading totcts from fullrun_pn_xmm0149670301_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Mon May 21 00:11:28 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 00:11:28 2012] Using photon index=1.80, rate=0.00543, arf fullrun_pn_xmm0149670301_pi300-10000_pass1_cl_src33.arf
[Mon May 21 00:11:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 00:11:28 2012] Updating source flux to 1.3e-14
[Mon May 21 00:16:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting