[Fri May 18 10:28:02 2012] Detection parameters:
  Position = (289.6, 354.7) = 22 46 32.13 -52 39 53.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 168.0 +/- 20.1
  Background counts = 95.2
  Rate = 0.01 +/- 0.001

[Fri May 18 10:28:06 2012] Off-axis axis estimate = 4.13'
[Fri May 18 10:34:34 2012] Using EEF radius (= 8.49 ")to estimate initial spatial extent for simple fitting
[Fri May 18 10:34:34 2012] Initial guess for spatial extent in simple fitting = 8.49"
[Fri May 18 10:34:34 2012] source mask rpix=2.0, npix_max = 24, mask sum = 24, frac = 0.997
[Fri May 18 10:34:34 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 8.49"
[Fri May 18 17:50:32 2012] fullrun_pn_xmm0149670301_pi300-10000_cl_pass0_src12.ximg exists
[Fri May 18 17:50:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149670301_pi300-10000_cl_pass0_src12.csv
[Fri May 18 17:50:32 2012] fullrun_pn_xmm0149670301_pi300-10000_cl_pass0_src12_1.ximg exists
[Fri May 18 17:50:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149670301_pi300-10000_cl_pass0_src12.csv
[Fri May 18 17:50:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0149670301_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0149670301_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 17:50:35 2012] fullrun_pn_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Fri May 18 17:50:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src12.csv
[Fri May 18 17:50:35 2012] fullrun_pn_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Fri May 18 17:50:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src12.csv
[Fri May 18 17:50:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 01:57:50 2012] Spatial fit model total counts = 1090.810000, observed total counts = 965.000000
[Sat May 19 01:57:50 2012] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 19 01:57:51 2012] Vigneting correction estimate = 1.000000
[Sat May 19 01:57:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 01:57:51 2012] Assessing source extent using major
[Sat May 19 01:57:51 2012] Source does appear to be extended
[Sat May 19 01:57:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 01:58:35 2012] Using EEF radius (= 8.49 ")to estimate initial spatial extent for simple fitting
[Sat May 19 01:58:35 2012] Initial guess for spatial extent in simple fitting = 8.49"
[Sat May 19 01:58:35 2012] source mask rpix=2.0, npix_max = 24, mask sum = 24, frac = 0.997
[Sat May 19 01:58:35 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 8.49"
[Sat May 19 08:40:57 2012] fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_src7.ximg exists
[Sat May 19 08:40:57 2012] fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_src7_1.ximg exists
[Sat May 19 08:40:57 2012] Fit fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_src7 appears to have run properly
[Sat May 19 08:40:59 2012] fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sat May 19 08:40:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sat May 19 08:40:59 2012] fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sat May 19 08:40:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sat May 19 08:40:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 15:53:49 2012] Spatial fit model total counts = 985.465000, observed total counts = 965.000000
[Sat May 19 15:53:49 2012] Offset between fit and detection position for source 13 = 1.984803 pixels
[Sat May 19 15:53:49 2012] 886.653160 total counts/ 2.802160 bgd. counts: snr = 527.998384
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 1.984803 pixels
  Position = (291.5, 354.3) = 22 46 31.21 -52 39 56.2
  Extent = 17.0" x 17.0", rotation angle = 295
  Source counts = 883.9 +/- 29.8
  Background counts = 2.8
  Rate = 0.03 +/- 0.001
[Sat May 19 15:53:49 2012] Vigneting correction estimate = 1.000000
[Sat May 19 15:53:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 15:53:49 2012] Assessing source extent using major
[Sat May 19 15:53:49 2012] Source does appear to be extended
[Sat May 19 15:53:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 15:54:24 2012] XMMSAS src. selection expression = ellipse(25311.722000, 30771.437600, 1019.358029, 1019.358029, 295.151000, X, Y)
[Sat May 19 15:54:24 2012] Writing source region out to fullrun_pn_xmm0149670301_pi300-10000_pass1_cl_src13_src.reg
[Sat May 19 15:54:24 2012] Extracting stamp from image fullrun_pn_xmm0149670301_pi300-10000_cl_sm2.00.img.gz, (233, 296) - (350, 413)
[Sat May 19 15:54:24 2012] XMMSAS bgd. selection expression = annulus(25311.722000, 30771.437600, 1698.930049, 3397.860098, X, Y) && !ellipse(23724.029633, 30992.050201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22941.078000, 29800.954000, 1364.200039, 1364.200039, 0.000000, X, Y) && !ellipse(28340.191010, 28755.530518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29448.705566, 27969.474579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28151.575073, 27886.117279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26612.074921, 27677.240814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27270.907166, 27512.363495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28633.438995, 27463.253418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27286.733795, 26653.591614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26110.420410, 26567.754517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28142.828200, 26716.722400, 1178.176034, 1178.176034, 0.000000, X, Y) && !ellipse(29403.965668, 26614.190979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27345.208000, 26021.956000, 2185.120063, 2185.120063, 0.000000, X, Y)
[Sat May 19 15:54:24 2012] Writing fullrun_pn_xmm0149670301_pi300-10000_pass1_cl_src13.gif
[Sat May 19 16:02:47 2012] Mean detx,y = (-4747.05, -1736.93) 
[Sat May 19 16:02:52 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 19 16:03:41 2012] Binned source spectrum to 10 counts/bin
[Sat May 19 16:03:42 2012] Setting source spectrum file to fullrun_pn_xmm0149670301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat May 19 16:03:42 2012] Setting bgd. spectrum file to fullrun_pn_xmm0149670301_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Mon May 21 00:11:23 2012] Updating aperture counts using extracted products
[Mon May 21 00:11:23 2012] Error reading totcts from fullrun_pn_xmm0149670301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Mon May 21 00:11:27 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 00:11:27 2012] Using photon index=1.80, rate=0.0347, arf fullrun_pn_xmm0149670301_pi300-10000_pass1_cl_src13.arf
[Mon May 21 00:11:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 00:11:27 2012] Updating source flux to 1.1e-13
[Mon May 21 00:16:40 2012] Flag p found in src. 13 procflags, skipping spectral fitting