[Fri May 18 10:28:02 2012] Detection parameters:
  Position = (254.1, 224.1) = 22 46 49.17 -52 49 21.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2307.4 +/- 59.3
  Background counts = 76.1
  Rate = 0.2 +/- 0.004

[Fri May 18 10:28:06 2012] Off-axis axis estimate = 6.27'
[Fri May 18 10:34:34 2012] Using EEF radius (= 9.57 ")to estimate initial spatial extent for simple fitting
[Fri May 18 10:34:34 2012] Initial guess for spatial extent in simple fitting = 9.57"
[Fri May 18 10:34:34 2012] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.236
[Fri May 18 10:34:34 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.57"
[Fri May 18 17:50:32 2012] fullrun_pn_xmm0149670301_pi300-10000_cl_pass0_src1.ximg exists
[Fri May 18 17:50:32 2012] fullrun_pn_xmm0149670301_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri May 18 17:50:32 2012] Fit fullrun_pn_xmm0149670301_pi300-10000_cl_pass0_src1 appears to have run properly
[Fri May 18 17:50:35 2012] fullrun_pn_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri May 18 17:50:35 2012] fullrun_pn_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May 18 17:50:35 2012] Fit fullrun_pn_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat May 19 01:57:50 2012] Warning, spatial fit 1 centroid is now closest to src. 85
[Sat May 19 01:57:50 2012] Spatial fit model total counts = 2916.770000, observed total counts = 2920.000000
[Sat May 19 01:57:50 2012] Offset between fit and detection position for source 1 = 0.157785 pixels
[Sat May 19 01:57:50 2012] Warning, changing simple spatial fit ID from 1 to 84
[Sat May 19 01:57:50 2012] 2882.030000 total counts/ 1503.310000 bgd. counts: snr = 35.559185
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.157785 pixels
  Position = (254.2, 224.2) = 22 46 49.11 -52 49 21.8
  Extent = 5.6 (5.2-6.0)" x 4.6 (4.3-5.0)", rotation angle = 53 (37-66) degrees
  Source counts = 1378.7 +/- 53.7
  Background counts = 1503.3
  Rate = 0.05 +/- 0.002
[Sat May 19 01:57:51 2012] Vigneting correction estimate = 1.000000
[Sat May 19 01:57:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 01:57:51 2012] Assessing source extent using major axis lower bound
[Sat May 19 01:57:51 2012] Source does appear to be extended
[Sat May 19 01:57:51 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.06
[Sat May 19 01:58:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 19 01:58:35 2012] Initial guess for spatial extent in simple fitting = 5.07"
[Sat May 19 01:58:35 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.811
[Sat May 19 01:58:35 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.07"
[Sat May 19 08:40:57 2012] fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_src1.ximg exists
[Sat May 19 08:40:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_src1.csv
[Sat May 19 08:40:57 2012] fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat May 19 08:40:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_src1.csv
[Sat May 19 08:40:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 08:40:59 2012] fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat May 19 08:40:59 2012] fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat May 19 08:40:59 2012] Fit fullrun_pn_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat May 19 15:53:49 2012] Spatial fit model total counts = 2908.650000, observed total counts = 2904.000000
[Sat May 19 15:53:49 2012] Offset between fit and detection position for source 1 = 0.062614 pixels
[Sat May 19 15:53:49 2012] 2942.800000 total counts/ 1381.490000 bgd. counts: snr = 42.006381
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.062614 pixels
  Position = (254.2, 224.2) = 22 46 49.13 -52 49 21.7
  Extent = 5.4 (5.2-5.7)", rotation angle = 0
  Source counts = 1561.3 +/- 54.2
  Background counts = 1381.5
  Rate = 0.06 +/- 0.002
[Sat May 19 15:53:49 2012] Vigneting correction estimate = 1.000000
[Sat May 19 15:53:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 15:53:49 2012] Assessing source extent using major axis lower bound
[Sat May 19 15:53:49 2012] Source does appear to be extended
[Sat May 19 15:53:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 15:54:24 2012] Counts = 1561.310000, rescaling region sizes by 2.000000
[Sat May 19 15:54:24 2012] XMMSAS src. selection expression = ellipse(22064.317800, 19459.690600, 650.786419, 650.786419, 0.000000, X, Y)
[Sat May 19 15:54:24 2012] Writing source region out to fullrun_pn_xmm0149670301_pi300-10000_pass1_cl_src1_src.reg
[Sat May 19 15:54:24 2012] Extracting stamp from image fullrun_pn_xmm0149670301_pi300-10000_cl_sm2.00.img.gz, (217, 187) - (292, 262)
[Sat May 19 15:54:24 2012] XMMSAS bgd. selection expression = annulus(22064.317800, 19459.690600, 2169.288062, 4338.576125, X, Y) && !ellipse(24311.332733, 24656.035187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25162.882000, 24189.252000, 1114.496032, 1114.496032, 0.000000, X, Y) && !ellipse(27483.105200, 24291.734800, 1530.160044, 1530.160044, 0.000000, X, Y) && !ellipse(27060.995239, 24055.748993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25919.359000, 23911.348600, 1159.008033, 1159.008033, 0.000000, X, Y) && !ellipse(26653.825256, 23619.222351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26819.947784, 23012.611877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23629.562000, 22257.436000, 1266.752036, 1266.752036, 0.000000, X, Y) && !ellipse(24238.762817, 22760.678802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24289.704000, 23693.256000, 1164.304034, 1164.304034, 356.982000, X, Y) && !ellipse(25349.731200, 23923.574000, 588.513617, 588.513617, 0.000000, X, Y) && !ellipse(25938.610600, 23822.996000, 1187.392034, 1187.392034, 0.000000, X, Y) && !ellipse(22619.132800, 21812.160800, 422.778412, 422.778412, 0.000000, X, Y) && !ellipse(26957.226074, 21571.335861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22753.345612, 19782.641296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24174.605200, 18858.760000, 467.225258, 467.225258, 0.000000, X, Y)
[Sat May 19 15:54:24 2012] Writing fullrun_pn_xmm0149670301_pi300-10000_pass1_cl_src1.gif
[Sat May 19 15:54:50 2012] Mean detx,y = (506.24, 8816.59) 
[Sat May 19 15:54:54 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 19 15:56:39 2012] Binned source spectrum to 10 counts/bin
[Sat May 19 15:56:39 2012] Setting source spectrum file to fullrun_pn_xmm0149670301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat May 19 15:56:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0149670301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon May 21 00:11:23 2012] Updating aperture counts using extracted products
[Mon May 21 00:11:23 2012] Error reading totcts from fullrun_pn_xmm0149670301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 21 00:11:26 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 00:11:26 2012] Using photon index=1.80, rate=0.0613, arf fullrun_pn_xmm0149670301_pi300-10000_pass1_cl_src1.arf
[Mon May 21 00:11:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 00:11:27 2012] Updating source flux to 2.4e-13
[Mon May 21 00:22:23 2012] Reading fit data from xmm0149670301/analysis//spectral/fullrun_pn_xmm0149670301_pi300-10000_pass1_cl_src1_pl.csv
[Mon May 21 00:22:23 2012] Spectral fit parameter nH value = 2.37741e+20
[Mon May 21 00:22:23 2012] Spectral fit parameter PhoIndex value = 2.0843
[Mon May 21 00:22:23 2012] Failed to get F(0.3-8.0) from xmm0149670301/analysis//spectral/fullrun_pn_xmm0149670301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon May 21 00:22:23 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 00:22:23 2012] Using Nh = 2.4e+20, photon index=2.08, rate=0.0613, arf fullrun_pn_xmm0149670301_pi300-10000_pass1_cl_src1.arf
[Mon May 21 00:22:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 00:22:23 2012] Updating source flux to 2.1e-13