[Fri May 18 10:30:27 2012] Detection parameters:
  Position = (320.9, 275.9) = 22 46 17.10 -52 45 36.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 147.9 +/- 20.9
  Background counts = 80.5
  Rate = 0.006 +/- 0.0008

[Fri May 18 10:30:28 2012] Off-axis axis estimate = 2.31'
[Fri May 18 21:56:01 2012] Using EEF radius (= 7.58 ")to estimate initial spatial extent for simple fitting
[Fri May 18 21:56:01 2012] Initial guess for spatial extent in simple fitting = 7.58"
[Fri May 18 21:56:01 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.795
[Fri May 18 21:56:01 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 7.58"
[Sat May 19 01:57:24 2012] fullrun_mos2_xmm0149670301_pi300-10000_cl_pass0_src26.ximg exists
[Sat May 19 01:57:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149670301_pi300-10000_cl_pass0_src26.csv
[Sat May 19 01:57:24 2012] fullrun_mos2_xmm0149670301_pi300-10000_cl_pass0_src26_1.ximg exists
[Sat May 19 01:57:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149670301_pi300-10000_cl_pass0_src26.csv
[Sat May 19 01:57:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0149670301_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0149670301_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 01:57:26 2012] fullrun_mos2_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sat May 19 01:57:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sat May 19 01:57:26 2012] fullrun_mos2_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sat May 19 01:57:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sat May 19 01:57:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 01:58:19 2012] Source 47 is offset by 1.890057 and 2.889318 pixels which is larger than
2 X fitted extent = 0.881444 x 0.881444, not incorporating fit results
[Sat May 19 01:58:19 2012] Warning, spatial fit 26 centroid is now closest to src. 14
[Sat May 19 01:58:19 2012] Source 47 is offset by 5.147183 and 2.283318 pixels which is larger than
2 X fitted extent = 0.906023 x 0.906023, not incorporating fit results
[Sat May 19 01:58:19 2012] Vigneting correction estimate = 1.000000
[Sat May 19 01:58:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 01:58:19 2012] Assessing source extent using major
[Sat May 19 01:58:19 2012] Source does appear to be extended
[Sat May 19 01:58:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 01:58:19 2012] Source is confused with source 24
[Sat May 19 12:12:59 2012] Using EEF radius (= 7.58 ")to estimate initial spatial extent for simple fitting
[Sat May 19 12:12:59 2012] Initial guess for spatial extent in simple fitting = 7.58"
[Sat May 19 12:12:59 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.795
[Sat May 19 12:12:59 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 7.58"
[Sat May 19 15:53:32 2012] fullrun_mos2_xmm0149670301_pi300-10000_cl_pass1_src19.ximg exists
[Sat May 19 15:53:32 2012] fullrun_mos2_xmm0149670301_pi300-10000_cl_pass1_src19_1.ximg exists
[Sat May 19 15:53:32 2012] Fit fullrun_mos2_xmm0149670301_pi300-10000_cl_pass1_src19 appears to have run properly
[Sat May 19 15:53:33 2012] fullrun_mos2_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sat May 19 15:53:33 2012] fullrun_mos2_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sat May 19 15:53:33 2012] Fit fullrun_mos2_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Sat May 19 15:54:08 2012] Source 47 is offset by 2.241551 and 2.645961 pixels which is larger than
2 X fitted extent = 0.837508 x 0.837508, not incorporating fit results
[Sat May 19 15:54:08 2012] Warning, spatial fit 19 centroid is now closest to src. 24
[Sat May 19 15:54:08 2012] Source 47 is offset by 5.088539 and 2.291731 pixels which is larger than
2 X fitted extent = 0.906023 x 0.906023, not incorporating fit results
[Sat May 19 15:54:08 2012] Vigneting correction estimate = 1.000000
[Sat May 19 15:54:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 15:54:08 2012] Assessing source extent using major
[Sat May 19 15:54:08 2012] Source does appear to be extended
[Sat May 19 15:54:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 22:18:07 2012] XMMSAS src. selection expression = ellipse(27873.420929, 23958.792633, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 20 22:18:07 2012] Writing source region out to fullrun_mos2_xmm0149670301_pi300-10000_pass1_cl_src47_src.reg
[Sun May 20 22:18:07 2012] Extracting stamp from image fullrun_mos2_xmm0149670301_pi300-10000_cl_sm2.00.img.gz, (283, 238) - (358, 313)
[Sun May 20 22:18:07 2012] XMMSAS bgd. selection expression = annulus(27873.420929, 23958.792633, 1087.500000, 2175.000000, X, Y) && !ellipse(25481.172800, 23925.872600, 1155.232033, 1155.232033, 0.000000, X, Y) && !ellipse(26654.273956, 25726.683716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26659.233551, 24674.033630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26013.274000, 24151.952000, 2306.272066, 2306.272066, 0.000000, X, Y) && !ellipse(27330.486000, 25418.164000, 1134.992033, 1134.992033, 0.000000, X, Y) && !ellipse(26859.680298, 26566.448242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28150.651123, 26156.187805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25641.070000, 23800.024000, 1153.136033, 1153.136033, 0.000000, X, Y) && !ellipse(27156.039978, 24272.670197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28742.101379, 26846.583038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27922.358000, 26762.724000, 1192.224034, 1192.224034, 0.000000, X, Y) && !ellipse(27957.734039, 24500.413300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28299.489410, 25338.983063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25088.455000, 22768.238000, 1215.384035, 1215.384035, 0.000000, X, Y) && !ellipse(25928.606659, 23064.873474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25849.072601, 25874.446716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25638.865967, 25272.697601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28675.152161, 25866.423218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26590.704590, 23439.705200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28750.310730, 24494.012024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27517.670898, 22838.688873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26777.294739, 22930.375000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24941.931396, 26390.918945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27984.233887, 23105.681274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29453.779327, 25641.003265, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 20 22:18:07 2012] Writing fullrun_mos2_xmm0149670301_pi300-10000_pass1_cl_src47.gif
[Sun May 20 22:25:58 2012] Mean detx,y = (-1540.74, -1725.53) 
[Sun May 20 22:26:00 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 22:26:19 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 22:26:19 2012] Setting source spectrum file to fullrun_mos2_xmm0149670301_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Sun May 20 22:26:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0149670301_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Sun May 20 23:50:47 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 20 23:50:47 2012] rmf not generated due to insufficient counts
[Mon May 21 00:11:37 2012] Updating aperture counts using extracted products
[Mon May 21 00:11:37 2012] Error reading totcts from fullrun_mos2_xmm0149670301_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Mon May 21 00:11:40 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 00:11:40 2012] Using photon index=1.80, rate=0.00564, arf fullrun_mos2_xmm0149670301_pi300-10000_pass1_cl_src47.arf
[Mon May 21 00:11:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 00:11:40 2012] Updating source flux to 5.2e-14
[Mon May 21 00:14:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting