[Fri May 18 10:30:26 2012] Detection parameters:
  Position = (330.2, 297.9) = 22 46 12.70 -52 44 1.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 111.9 +/- 18.5
  Background counts = 96.4
  Rate = 0.005 +/- 0.0008

[Fri May 18 10:30:28 2012] Off-axis axis estimate = 2.30'
[Fri May 18 21:56:01 2012] Using EEF radius (= 7.58 ")to estimate initial spatial extent for simple fitting
[Fri May 18 21:56:01 2012] Initial guess for spatial extent in simple fitting = 7.58"
[Fri May 18 21:56:01 2012] source mask rpix=1.7, npix_max = 20, mask sum = 14, frac = 0.696
[Fri May 18 21:56:01 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 7.58"
[Sat May 19 01:57:25 2012] fullrun_mos2_xmm0149670301_pi300-10000_cl_pass0_src40.ximg exists
[Sat May 19 01:57:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149670301_pi300-10000_cl_pass0_src40.csv
[Sat May 19 01:57:25 2012] fullrun_mos2_xmm0149670301_pi300-10000_cl_pass0_src40_1.ximg exists
[Sat May 19 01:57:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149670301_pi300-10000_cl_pass0_src40.csv
[Sat May 19 01:57:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0149670301_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0149670301_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 01:57:27 2012] fullrun_mos2_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Sat May 19 01:57:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src40.csv
[Sat May 19 01:57:27 2012] fullrun_mos2_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Sat May 19 01:57:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src40.csv
[Sat May 19 01:57:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 01:58:19 2012] Warning, spatial fit 40 centroid is now closest to src. 8
[Sat May 19 01:58:19 2012] Vigneting correction estimate = 1.000000
[Sat May 19 01:58:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 01:58:19 2012] Assessing source extent using major
[Sat May 19 01:58:19 2012] Source does appear to be extended
[Sat May 19 01:58:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 01:58:19 2012] Source is confused with source 8
[Sat May 19 12:12:59 2012] Using EEF radius (= 7.58 ")to estimate initial spatial extent for simple fitting
[Sat May 19 12:12:59 2012] Initial guess for spatial extent in simple fitting = 7.58"
[Sat May 19 12:12:59 2012] source mask rpix=1.7, npix_max = 20, mask sum = 14, frac = 0.696
[Sat May 19 12:12:59 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 7.58"
[Sat May 19 15:53:32 2012] fullrun_mos2_xmm0149670301_pi300-10000_cl_pass1_src31.ximg exists
[Sat May 19 15:53:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149670301_pi300-10000_cl_pass1_src31.csv
[Sat May 19 15:53:32 2012] fullrun_mos2_xmm0149670301_pi300-10000_cl_pass1_src31_1.ximg exists
[Sat May 19 15:53:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149670301_pi300-10000_cl_pass1_src31.csv
[Sat May 19 15:53:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0149670301_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0149670301_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 15:53:33 2012] fullrun_mos2_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Sat May 19 15:53:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src31.csv
[Sat May 19 15:53:33 2012] fullrun_mos2_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Sat May 19 15:53:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src31.csv
[Sat May 19 15:53:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 15:54:08 2012] Warning, spatial fit 31 centroid is now closest to src. 8
[Sat May 19 15:54:08 2012] Vigneting correction estimate = 1.000000
[Sat May 19 15:54:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 15:54:08 2012] Assessing source extent using major
[Sat May 19 15:54:08 2012] Source does appear to be extended
[Sat May 19 15:54:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 22:18:08 2012] XMMSAS src. selection expression = ellipse(28675.152161, 25866.423218, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 20 22:18:08 2012] Writing source region out to fullrun_mos2_xmm0149670301_pi300-10000_pass1_cl_src38_src.reg
[Sun May 20 22:18:08 2012] Extracting stamp from image fullrun_mos2_xmm0149670301_pi300-10000_cl_sm2.00.img.gz, (293, 260) - (368, 335)
[Sun May 20 22:18:08 2012] XMMSAS bgd. selection expression = annulus(28675.152161, 25866.423218, 1087.500000, 2175.000000, X, Y) && !ellipse(25481.172800, 23925.872600, 1155.232033, 1155.232033, 0.000000, X, Y) && !ellipse(26654.273956, 25726.683716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26659.233551, 24674.033630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26013.274000, 24151.952000, 2306.272066, 2306.272066, 0.000000, X, Y) && !ellipse(27330.486000, 25418.164000, 1134.992033, 1134.992033, 0.000000, X, Y) && !ellipse(26859.680298, 26566.448242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28150.651123, 26156.187805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25641.070000, 23800.024000, 1153.136033, 1153.136033, 0.000000, X, Y) && !ellipse(27156.039978, 24272.670197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28742.101379, 26846.583038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27922.358000, 26762.724000, 1192.224034, 1192.224034, 0.000000, X, Y) && !ellipse(27957.734039, 24500.413300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28299.489410, 25338.983063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27873.420929, 23958.792633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26603.090302, 27421.598663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25928.606659, 23064.873474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25849.072601, 25874.446716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25638.865967, 25272.697601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26590.704590, 23439.705200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28750.310730, 24494.012024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27517.670898, 22838.688873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27657.896271, 27776.469879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29940.374512, 27192.801514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26777.294739, 22930.375000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27984.233887, 23105.681274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29453.779327, 25641.003265, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 20 22:18:08 2012] Writing fullrun_mos2_xmm0149670301_pi300-10000_pass1_cl_src38.gif
[Sun May 20 22:29:50 2012] Mean detx,y = (-849.48, 194.86) 
[Sun May 20 22:29:51 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 22:30:01 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 22:30:01 2012] Setting source spectrum file to fullrun_mos2_xmm0149670301_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Sun May 20 22:30:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0149670301_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Mon May 21 00:03:38 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 21 00:03:38 2012] rmf not generated due to insufficient counts
[Mon May 21 00:11:38 2012] Updating aperture counts using extracted products
[Mon May 21 00:11:38 2012] Error reading totcts from fullrun_mos2_xmm0149670301_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Mon May 21 00:11:41 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 00:11:41 2012] Using photon index=1.80, rate=0.00454, arf fullrun_mos2_xmm0149670301_pi300-10000_pass1_cl_src38.arf
[Mon May 21 00:11:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 00:11:41 2012] Updating source flux to 4.4e-14
[Mon May 21 00:14:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting