[Fri May 18 10:29:21 2012] Detection parameters:
  Position = (296.6, 267.2) = 22 46 28.76 -52 46 13.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.8 +/- 18.3
  Background counts = 76.5
  Rate = 0.004 +/- 0.0008

[Fri May 18 10:29:22 2012] Off-axis axis estimate = 2.27'
[Fri May 18 17:50:39 2012] Using EEF radius (= 7.56 ")to estimate initial spatial extent for simple fitting
[Fri May 18 17:50:39 2012] Initial guess for spatial extent in simple fitting = 7.56"
[Fri May 18 17:50:39 2012] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.998
[Fri May 18 17:50:39 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 7.56"
[Fri May 18 21:55:59 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_src42.ximg exists
[Fri May 18 21:55:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_src42.csv
[Fri May 18 21:55:59 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_src42_1.ximg exists
[Fri May 18 21:55:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_src42.csv
[Fri May 18 21:55:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 21:56:00 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Fri May 18 21:56:00 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Fri May 18 21:56:00 2012] Fit fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly
[Sat May 19 01:58:05 2012] Source 62 is offset by 0.083765 and -7.731777 pixels which is larger than
2 X fitted extent = 0.869200 x 0.869200, not incorporating fit results
[Sat May 19 01:58:05 2012] Vigneting correction estimate = 1.000000
[Sat May 19 01:58:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 01:58:05 2012] Assessing source extent using major
[Sat May 19 01:58:05 2012] Source does appear to be extended
[Sat May 19 01:58:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 01:58:05 2012] Source is confused with source 59
[Sat May 19 01:58:05 2012] Source is confused with source 63
[Sat May 19 01:58:05 2012] Source is confused with source 64
[Sat May 19 08:41:02 2012] Using EEF radius (= 7.56 ")to estimate initial spatial extent for simple fitting
[Sat May 19 08:41:02 2012] Initial guess for spatial extent in simple fitting = 7.56"
[Sat May 19 08:41:02 2012] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.998
[Sat May 19 08:41:02 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 7.56"
[Sat May 19 12:12:57 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass1_src30.ximg exists
[Sat May 19 12:12:57 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass1_src30_1.ximg exists
[Sat May 19 12:12:57 2012] Fit fullrun_mos1_xmm0149670301_pi300-10000_cl_pass1_src30 appears to have run properly
[Sat May 19 12:12:58 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Sat May 19 12:12:58 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Sat May 19 12:12:58 2012] Fit fullrun_mos1_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Sat May 19 15:53:59 2012] Source 62 is offset by 2.852643 and 6.175441 pixels which is larger than
2 X fitted extent = 0.873168 x 0.873168, not incorporating fit results
[Sat May 19 15:53:59 2012] Vigneting correction estimate = 1.000000
[Sat May 19 15:53:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 15:53:59 2012] Assessing source extent using major
[Sat May 19 15:53:59 2012] Source does appear to be extended
[Sat May 19 15:53:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 20:05:13 2012] XMMSAS src. selection expression = ellipse(25756.491730, 23199.799408, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 20 20:05:13 2012] Writing source region out to fullrun_mos1_xmm0149670301_pi300-10000_pass1_cl_src62_src.reg
[Sun May 20 20:05:13 2012] Extracting stamp from image fullrun_mos1_xmm0149670301_pi300-10000_cl_sm2.00.img.gz, (259, 230) - (334, 305)
[Sun May 20 20:05:13 2012] XMMSAS bgd. selection expression = annulus(25756.491730, 23199.799408, 1087.500000, 2175.000000, X, Y) && !ellipse(27256.548000, 25522.930000, 1123.248032, 1123.248032, 0.000000, X, Y) && !ellipse(27627.134000, 26437.914000, 1108.000032, 1108.000032, 0.000000, X, Y) && !ellipse(25820.694200, 23912.822000, 608.412818, 608.412818, 0.000000, X, Y) && !ellipse(27987.235600, 25980.148000, 1133.352033, 1133.352033, 0.000000, X, Y) && !ellipse(26804.160980, 24575.449738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26697.476000, 25294.766000, 2246.496065, 2246.496065, 0.000000, X, Y) && !ellipse(26072.020721, 24913.931458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27106.109497, 25960.636932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28158.687897, 25623.514587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27009.258000, 23557.160000, 1190.368034, 1190.368034, 0.000000, X, Y) && !ellipse(28486.241516, 26150.402496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27357.108002, 24493.650940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25156.456000, 23429.279600, 1203.832035, 1203.832035, 0.000000, X, Y) && !ellipse(26299.293884, 23173.764191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28110.574000, 26789.168000, 2299.896066, 2299.896066, 0.000000, X, Y) && !ellipse(27922.945190, 24484.740662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25410.347595, 26222.675049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25203.263275, 25605.194885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27880.079742, 23704.451447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24473.464752, 24642.906067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24057.129608, 23453.991913, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 20 20:05:13 2012] Writing fullrun_mos1_xmm0149670301_pi300-10000_pass1_cl_src62.gif
[Sun May 20 20:18:08 2012] Mean detx,y = (-3471.41, 330.95) 
[Sun May 20 20:18:10 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 20:18:31 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 20:18:32 2012] Setting source spectrum file to fullrun_mos1_xmm0149670301_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Sun May 20 20:18:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0149670301_pi300-10000_pass1_cl_src62_bgd.pi.gz
[Sun May 20 21:37:36 2012] Not generating rmf since there are only 96 counts
[Sun May 20 21:37:36 2012] rmf not generated due to insufficient counts
[Mon May 21 00:11:32 2012] Updating aperture counts using extracted products
[Mon May 21 00:11:32 2012] Error reading totcts from fullrun_mos1_xmm0149670301_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Mon May 21 00:11:35 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 00:11:35 2012] Using photon index=1.80, rate=0.00398, arf fullrun_mos1_xmm0149670301_pi300-10000_pass1_cl_src62.arf
[Mon May 21 00:11:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 00:11:35 2012] Updating source flux to 4.1e-14
[Mon May 21 00:11:44 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting