[Fri May 18 10:29:21 2012] Detection parameters:
  Position = (321.5, 282.0) = 22 46 16.83 -52 45 11.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.1 +/- 19.2
  Background counts = 96.9
  Rate = 0.004 +/- 0.0007

[Fri May 18 10:29:22 2012] Off-axis axis estimate = 2.05'
[Fri May 18 17:50:39 2012] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Fri May 18 17:50:39 2012] Initial guess for spatial extent in simple fitting = 7.46"
[Fri May 18 17:50:39 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.020
[Fri May 18 17:50:39 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 7.46"
[Fri May 18 21:55:59 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_src45.ximg exists
[Fri May 18 21:55:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_src45.csv
[Fri May 18 21:55:59 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_src45_1.ximg exists
[Fri May 18 21:55:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_src45.csv
[Fri May 18 21:55:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 21:56:00 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Fri May 18 21:56:00 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Fri May 18 21:56:00 2012] Fit fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Sat May 19 01:58:05 2012] Warning, spatial fit 45 centroid is now closest to src. 25
[Sat May 19 01:58:05 2012] Vigneting correction estimate = 1.000000
[Sat May 19 01:58:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 01:58:05 2012] Assessing source extent using major
[Sat May 19 01:58:05 2012] Source does appear to be extended
[Sat May 19 01:58:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 01:58:05 2012] Source is confused with source 29
[Sat May 19 08:41:02 2012] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Sat May 19 08:41:02 2012] Initial guess for spatial extent in simple fitting = 7.46"
[Sat May 19 08:41:02 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.020
[Sat May 19 08:41:02 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 7.46"
[Sat May 19 12:12:57 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass1_src33.ximg exists
[Sat May 19 12:12:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149670301_pi300-10000_cl_pass1_src33.csv
[Sat May 19 12:12:57 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass1_src33_1.ximg exists
[Sat May 19 12:12:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149670301_pi300-10000_cl_pass1_src33.csv
[Sat May 19 12:12:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0149670301_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0149670301_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 12:12:58 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Sat May 19 12:12:58 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Sat May 19 12:12:58 2012] Fit fullrun_mos1_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Sat May 19 15:53:59 2012] Warning, spatial fit 33 centroid is now closest to src. 23
[Sat May 19 15:53:59 2012] Vigneting correction estimate = 1.000000
[Sat May 19 15:53:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 15:53:59 2012] Assessing source extent using major
[Sat May 19 15:53:59 2012] Source does appear to be extended
[Sat May 19 15:53:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 20:05:13 2012] XMMSAS src. selection expression = ellipse(27922.945190, 24484.740662, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 20 20:05:13 2012] Writing source region out to fullrun_mos1_xmm0149670301_pi300-10000_pass1_cl_src55_src.reg
[Sun May 20 20:05:13 2012] Extracting stamp from image fullrun_mos1_xmm0149670301_pi300-10000_cl_sm2.00.img.gz, (284, 244) - (359, 319)
[Sun May 20 20:05:13 2012] XMMSAS bgd. selection expression = annulus(27922.945190, 24484.740662, 1087.500000, 2175.000000, X, Y) && !ellipse(27256.548000, 25522.930000, 1123.248032, 1123.248032, 0.000000, X, Y) && !ellipse(27627.134000, 26437.914000, 1108.000032, 1108.000032, 0.000000, X, Y) && !ellipse(25820.694200, 23912.822000, 608.412818, 608.412818, 0.000000, X, Y) && !ellipse(27987.235600, 25980.148000, 1133.352033, 1133.352033, 0.000000, X, Y) && !ellipse(26804.160980, 24575.449738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26697.476000, 25294.766000, 2246.496065, 2246.496065, 0.000000, X, Y) && !ellipse(26072.020721, 24913.931458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27147.963379, 26842.860687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27106.109497, 25960.636932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28158.687897, 25623.514587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27009.258000, 23557.160000, 1190.368034, 1190.368034, 0.000000, X, Y) && !ellipse(28486.241516, 26150.402496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27357.108002, 24493.650940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28908.781464, 27098.630280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27136.228149, 27358.554993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30458.649506, 29045.053497, 3480.000000, 3480.000000, 0.000000, X, Y) && !ellipse(25156.456000, 23429.279600, 1203.832035, 1203.832035, 0.000000, X, Y) && !ellipse(26299.293884, 23173.764191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25756.491730, 23199.799408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29209.953400, 26358.904000, 1268.440036, 1268.440036, 0.000000, X, Y) && !ellipse(28110.574000, 26789.168000, 2299.896066, 2299.896066, 0.000000, X, Y) && !ellipse(25410.347595, 26222.675049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25203.263275, 25605.194885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27880.079742, 23704.451447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25840.490000, 26744.708000, 1118.016032, 1118.016032, 0.000000, X, Y)
[Sun May 20 20:05:13 2012] Writing fullrun_mos1_xmm0149670301_pi300-10000_pass1_cl_src55.gif
[Sun May 20 20:19:34 2012] Mean detx,y = (-1089.91, 1050.13) 
[Sun May 20 20:19:35 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 20:19:47 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 20:19:47 2012] Setting source spectrum file to fullrun_mos1_xmm0149670301_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Sun May 20 20:19:47 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0149670301_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Sun May 20 22:16:40 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 20 22:16:40 2012] rmf not generated due to insufficient counts
[Mon May 21 00:11:33 2012] Updating aperture counts using extracted products
[Mon May 21 00:11:33 2012] Error reading totcts from fullrun_mos1_xmm0149670301_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Mon May 21 00:11:35 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 00:11:35 2012] Using photon index=1.80, rate=0.00379, arf fullrun_mos1_xmm0149670301_pi300-10000_pass1_cl_src55.arf
[Mon May 21 00:11:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 00:11:35 2012] Updating source flux to 3.6e-14
[Mon May 21 00:11:44 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting