[Fri May 18 10:29:20 2012] Detection parameters:
  Position = (323.0, 320.7) = 22 46 16.15 -52 42 22.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.7 +/- 18.9
  Background counts = 92.2
  Rate = 0.004 +/- 0.0007

[Fri May 18 10:29:22 2012] Off-axis axis estimate = 2.40'
[Fri May 18 17:50:39 2012] Using EEF radius (= 7.63 ")to estimate initial spatial extent for simple fitting
[Fri May 18 17:50:39 2012] Initial guess for spatial extent in simple fitting = 7.63"
[Fri May 18 17:50:39 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.984
[Fri May 18 17:50:39 2012] Giving source the simple spatial ID 44 for pass 0, mean size = 7.63"
[Fri May 18 21:55:59 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_src44.ximg exists
[Fri May 18 21:55:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_src44.csv
[Fri May 18 21:55:59 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_src44_1.ximg exists
[Fri May 18 21:55:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_src44.csv
[Fri May 18 21:55:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 21:56:00 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Fri May 18 21:56:00 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Fri May 18 21:56:00 2012] Fit fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src44 appears to have run properly
[Sat May 19 01:58:05 2012] Spatial fit model total counts = 1628.080000, observed total counts = 1606.000000
[Sat May 19 01:58:05 2012] Offset between fit and detection position for source 42 = 5.915578 pixels
[Sat May 19 01:58:05 2012] 1579.487000 total counts/ 1404.870000 bgd. counts: snr = 4.658740
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 5.915578 pixels
  Position = (321.5, 315.0) = 22 46 16.86 -52 42 46.9
  Extent = 15.2 (15.2-30.5)", rotation angle = 0
  Source counts = 174.6 +/- 39.7
  Background counts = 1404.9
  Rate = 0.006 +/- 0.001
[Sat May 19 01:58:05 2012] Vigneting correction estimate = 1.000000
[Sat May 19 01:58:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 01:58:05 2012] Assessing source extent using major axis lower bound
[Sat May 19 01:58:05 2012] Source does appear to be extended
[Sat May 19 01:58:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 01:58:05 2012] Source is confused with source 17
[Sat May 19 08:41:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 19 08:41:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 19 08:41:02 2012] Initial guess for spatial extent in simple fitting = 15.23"
[Sat May 19 08:41:02 2012] source mask rpix=3.5, npix_max = 64, mask sum = 64, frac = 0.999
[Sat May 19 08:41:02 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 15.23"
[Sat May 19 12:12:57 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass1_src32.ximg exists
[Sat May 19 12:12:57 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass1_src32_1.ximg exists
[Sat May 19 12:12:57 2012] Fit fullrun_mos1_xmm0149670301_pi300-10000_cl_pass1_src32 appears to have run properly
[Sat May 19 12:12:58 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Sat May 19 12:12:58 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Sat May 19 12:12:58 2012] Fit fullrun_mos1_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly
[Sat May 19 15:53:59 2012] Spatial fit model total counts = 3727.670000, observed total counts = 3723.000000
[Sat May 19 15:53:59 2012] Offset between fit and detection position for source 42 = 6.880805 pixels
[Sat May 19 15:53:59 2012] Warning, changing simple spatial fit ID from 32 to 9
[Sat May 19 15:53:59 2012] 3567.189000 total counts/ 2994.170000 bgd. counts: snr = 10.472028
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 6.880805 pixels
  Position = (323.7, 308.5) = 22 46 15.81 -52 43 15.3
  Extent = 28.7 (28.3-29.0)", rotation angle = 0
  Source counts = 573.0 +/- 59.7
  Background counts = 2994.2
  Rate = 0.02 +/- 0.002
[Sat May 19 15:53:59 2012] Source 42 is offset by 2.649264 and -3.708407 pixels which is larger than
2 X fitted extent = 1.895733 x 1.895733, not incorporating fit results
[Sat May 19 15:53:59 2012] Source 42 is offset by -4.893570 and -0.421448 pixels which is larger than
2 X fitted extent = 0.862570 x 0.862570, not incorporating fit results
[Sat May 19 15:53:59 2012] Vigneting correction estimate = 1.000000
[Sat May 19 15:53:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 15:53:59 2012] Assessing source extent using major axis lower bound
[Sat May 19 15:53:59 2012] Source does appear to be extended
[Sat May 19 15:53:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 20:05:13 2012] XMMSAS src. selection expression = ellipse(28110.574000, 26789.168000, 1724.922050, 1724.922050, 0.000000, X, Y)
[Sun May 20 20:05:13 2012] Writing source region out to fullrun_mos1_xmm0149670301_pi300-10000_pass1_cl_src42_src.reg
[Sun May 20 20:05:13 2012] Extracting stamp from image fullrun_mos1_xmm0149670301_pi300-10000_cl_sm2.00.img.gz, (225, 209) - (423, 408)
[Sun May 20 20:05:13 2012] XMMSAS bgd. selection expression = annulus(28110.574000, 26789.168000, 2874.870083, 5749.740165, X, Y) && !ellipse(23726.310303, 30951.619415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27256.548000, 25522.930000, 1123.248032, 1123.248032, 0.000000, X, Y) && !ellipse(27627.134000, 26437.914000, 1108.000032, 1108.000032, 0.000000, X, Y) && !ellipse(25820.694200, 23912.822000, 608.412818, 608.412818, 0.000000, X, Y) && !ellipse(27987.235600, 25980.148000, 1133.352033, 1133.352033, 0.000000, X, Y) && !ellipse(26804.160980, 24575.449738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26697.476000, 25294.766000, 2246.496065, 2246.496065, 0.000000, X, Y) && !ellipse(26072.020721, 24913.931458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27147.963379, 26842.860687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27106.109497, 25960.636932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22583.107788, 21710.966507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28158.687897, 25623.514587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27009.258000, 23557.160000, 1190.368034, 1190.368034, 0.000000, X, Y) && !ellipse(28486.241516, 26150.402496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27357.108002, 24493.650940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28908.781464, 27098.630280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27136.228149, 27358.554993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30458.649506, 29045.053497, 3480.000000, 3480.000000, 0.000000, X, Y) && !ellipse(25156.456000, 23429.279600, 1203.832035, 1203.832035, 0.000000, X, Y) && !ellipse(26299.293884, 23173.764191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30927.227661, 32407.605621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25756.491730, 23199.799408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29209.953400, 26358.904000, 1268.440036, 1268.440036, 0.000000, X, Y) && !ellipse(27922.945190, 24484.740662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25410.347595, 26222.675049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25203.263275, 25605.194885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27880.079742, 23704.451447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25840.490000, 26744.708000, 1118.016032, 1118.016032, 0.000000, X, Y) && !ellipse(24473.464752, 24642.906067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24057.129608, 23453.991913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23980.527400, 26543.002520, 922.200027, 922.200027, 0.000000, X, Y)
[Sun May 20 20:05:13 2012] Writing fullrun_mos1_xmm0149670301_pi300-10000_pass1_cl_src42.gif
[Sun May 20 20:19:07 2012] Mean detx,y = (573.56, -331.78) 
[Sun May 20 20:19:09 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 20:19:31 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 20:19:31 2012] Setting source spectrum file to fullrun_mos1_xmm0149670301_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Sun May 20 20:19:31 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0149670301_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Mon May 21 00:11:32 2012] Updating aperture counts using extracted products
[Mon May 21 00:11:33 2012] Error reading totcts from fullrun_mos1_xmm0149670301_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Mon May 21 00:11:35 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 00:11:35 2012] Using photon index=1.80, rate=0.0211, arf fullrun_mos1_xmm0149670301_pi300-10000_pass1_cl_src42.arf
[Mon May 21 00:11:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 00:11:35 2012] Updating source flux to 1.8e-13
[Mon May 21 00:11:44 2012] Flag b found in src. 42 procflags, skipping spectral fitting
[Mon May 21 00:11:44 2012] Flag c found in src. 42 procflags, skipping spectral fitting