[Fri May 18 10:29:18 2012] Detection parameters:
  Position = (415.8, 355.9) = 22 45 31.78 -52 39 48.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 232.6 +/- 19.6
  Background counts = 16.7
  Rate = 0.01 +/- 0.001

[Fri May 18 10:29:22 2012] Off-axis axis estimate = 9.47'
[Fri May 18 17:50:39 2012] Using EEF radius (= 11.16 ")to estimate initial spatial extent for simple fitting
[Fri May 18 17:50:39 2012] Initial guess for spatial extent in simple fitting = 11.16"
[Fri May 18 17:50:39 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.957
[Fri May 18 17:50:39 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 11.16"
[Fri May 18 21:55:58 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_src5.ximg exists
[Fri May 18 21:55:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_src5.csv
[Fri May 18 21:55:58 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri May 18 21:55:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_src5.csv
[Fri May 18 21:55:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 21:55:59 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri May 18 21:55:59 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri May 18 21:55:59 2012] Fit fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sat May 19 01:58:04 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 12.914538 pixels away
[Sat May 19 01:58:05 2012] Vigneting correction estimate = 1.000000
[Sat May 19 01:58:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 01:58:05 2012] Assessing source extent using major
[Sat May 19 01:58:05 2012] Source does appear to be extended
[Sat May 19 01:58:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 08:41:02 2012] Using EEF radius (= 11.16 ")to estimate initial spatial extent for simple fitting
[Sat May 19 08:41:02 2012] Initial guess for spatial extent in simple fitting = 11.16"
[Sat May 19 08:41:02 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.957
[Sat May 19 08:41:02 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 11.16"
[Sat May 19 12:12:56 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass1_src5.ximg exists
[Sat May 19 12:12:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149670301_pi300-10000_cl_pass1_src5.csv
[Sat May 19 12:12:56 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat May 19 12:12:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149670301_pi300-10000_cl_pass1_src5.csv
[Sat May 19 12:12:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0149670301_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0149670301_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 12:12:58 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat May 19 12:12:58 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat May 19 12:12:58 2012] Fit fullrun_mos1_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat May 19 15:53:58 2012] Spatial fit model total counts = 402.439000, observed total counts = 401.000000
[Sat May 19 15:53:58 2012] Offset between fit and detection position for source 4 = 0.386936 pixels
[Sat May 19 15:53:58 2012] 403.054000 total counts/ 194.902000 bgd. counts: snr = 14.909821
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.386936 pixels
  Position = (415.4, 355.8) = 22 45 31.96 -52 39 48.7
  Extent = 7.6 (6.3-9.1)", rotation angle = 0
  Source counts = 208.2 +/- 20.1
  Background counts = 194.9
  Rate = 0.008 +/- 0.0007
[Sat May 19 15:53:59 2012] Vigneting correction estimate = 1.000000
[Sat May 19 15:53:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 15:53:59 2012] Assessing source extent using major axis lower bound
[Sat May 19 15:53:59 2012] Source does appear to be extended
[Sat May 19 15:53:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 20:05:12 2012] XMMSAS src. selection expression = ellipse(36091.747000, 30905.969800, 457.173013, 457.173013, 0.000000, X, Y)
[Sun May 20 20:05:12 2012] Writing source region out to fullrun_mos1_xmm0149670301_pi300-10000_pass1_cl_src4_src.reg
[Sun May 20 20:05:12 2012] Extracting stamp from image fullrun_mos1_xmm0149670301_pi300-10000_cl_sm2.00.img.gz, (389, 330) - (442, 382)
[Sun May 20 20:05:12 2012] XMMSAS bgd. selection expression = annulus(36091.747000, 30905.969800, 761.955022, 1523.910044, X, Y)
[Sun May 20 20:05:12 2012] Writing fullrun_mos1_xmm0149670301_pi300-10000_pass1_cl_src4.gif
[Sun May 20 20:07:18 2012] Mean detx,y = (9168.84, 2669.88) 
[Sun May 20 20:07:20 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 20:07:34 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 20:07:34 2012] Setting source spectrum file to fullrun_mos1_xmm0149670301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun May 20 20:07:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0149670301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon May 21 00:11:31 2012] Updating aperture counts using extracted products
[Mon May 21 00:11:31 2012] Error reading totcts from fullrun_mos1_xmm0149670301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon May 21 00:11:34 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 00:11:34 2012] Using photon index=1.80, rate=0.00767, arf fullrun_mos1_xmm0149670301_pi300-10000_pass1_cl_src4.arf
[Mon May 21 00:11:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 00:11:34 2012] Updating source flux to 1.2e-13