[Fri May 18 10:29:19 2012] Detection parameters:
  Position = (307.5, 151.3) = 22 46 23.51 -52 54 39.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.3 +/- 13.0
  Background counts = 10.1
  Rate = 0.004 +/- 0.0005

[Fri May 18 10:29:22 2012] Off-axis axis estimate = 10.69'
[Fri May 18 17:50:39 2012] Using EEF radius (= 11.77 ")to estimate initial spatial extent for simple fitting
[Fri May 18 17:50:39 2012] Initial guess for spatial extent in simple fitting = 11.77"
[Fri May 18 17:50:39 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.021
[Fri May 18 17:50:39 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 11.77"
[Fri May 18 21:55:59 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_src47.ximg exists
[Fri May 18 21:55:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_src47.csv
[Fri May 18 21:55:59 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_src47_1.ximg exists
[Fri May 18 21:55:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_src47.csv
[Fri May 18 21:55:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 21:56:00 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Fri May 18 21:56:00 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Fri May 18 21:56:00 2012] Fit fullrun_mos1_xmm0149670301_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly
[Sat May 19 01:58:04 2012] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 10.053580 pixels away
[Sat May 19 01:58:05 2012] Spatial fit model total counts = 185.998000, observed total counts = 186.000000
[Sat May 19 01:58:05 2012] Offset between fit and detection position for source 15 = 0.206098 pixels
[Sat May 19 01:58:05 2012] 185.851900 total counts/ 110.492000 bgd. counts: snr = 7.169269
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.206098 pixels
  Position = (307.5, 151.5) = 22 46 23.54 -52 54 38.3
  Extent = 6.3 (4.2-8.6)", rotation angle = 0
  Source counts = 75.4 +/- 13.6
  Background counts = 110.5
  Rate = 0.003 +/- 0.0005
[Sat May 19 01:58:05 2012] Vigneting correction estimate = 1.000000
[Sat May 19 01:58:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 01:58:05 2012] Assessing source extent using major axis lower bound
[Sat May 19 01:58:05 2012] Source does appear to be extended
[Sat May 19 01:58:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 08:41:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 19 08:41:02 2012] Initial guess for spatial extent in simple fitting = 6.28"
[Sat May 19 08:41:02 2012] source mask rpix=1.4, npix_max = 15, mask sum = 9, frac = 0.596
[Sat May 19 08:41:02 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 6.28"
[Sat May 19 12:12:57 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass1_src35.ximg exists
[Sat May 19 12:12:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149670301_pi300-10000_cl_pass1_src35.csv
[Sat May 19 12:12:57 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass1_src35_1.ximg exists
[Sat May 19 12:12:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149670301_pi300-10000_cl_pass1_src35.csv
[Sat May 19 12:12:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0149670301_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0149670301_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 12:12:58 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Sat May 19 12:12:59 2012] fullrun_mos1_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Sat May 19 12:12:59 2012] Fit fullrun_mos1_xmm0149670301_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Sat May 19 15:53:59 2012] Spatial fit model total counts = 185.998000, observed total counts = 186.000000
[Sat May 19 15:53:59 2012] Offset between fit and detection position for source 15 = 0.012062 pixels
[Sat May 19 15:53:59 2012] 185.846100 total counts/ 109.637000 bgd. counts: snr = 7.278272
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.012062 pixels
  Position = (307.5, 151.5) = 22 46 23.55 -52 54 38.2
  Extent = 6.4 (4.2-8.6)", rotation angle = 0
  Source counts = 76.2 +/- 13.6
  Background counts = 109.6
  Rate = 0.003 +/- 0.0005
[Sat May 19 15:53:59 2012] Vigneting correction estimate = 1.000000
[Sat May 19 15:53:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 15:53:59 2012] Assessing source extent using major axis lower bound
[Sat May 19 15:53:59 2012] Source does appear to be extended
[Sat May 19 15:53:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 20:05:13 2012] XMMSAS src. selection expression = ellipse(26700.974000, 13130.504400, 382.488611, 382.488611, 0.000000, X, Y)
[Sun May 20 20:05:13 2012] Writing source region out to fullrun_mos1_xmm0149670301_pi300-10000_pass1_cl_src15_src.reg
[Sun May 20 20:05:13 2012] Extracting stamp from image fullrun_mos1_xmm0149670301_pi300-10000_cl_sm2.00.img.gz, (285, 130) - (329, 173)
[Sun May 20 20:05:13 2012] XMMSAS bgd. selection expression = annulus(26700.974000, 13130.504400, 637.481018, 1274.962037, X, Y) && !ellipse(28170.516052, 12466.554077, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 20 20:05:13 2012] Writing fullrun_mos1_xmm0149670301_pi300-10000_pass1_cl_src15.gif
[Sun May 20 20:20:06 2012] Mean detx,y = (-10239.55, 7904.41) 
[Sun May 20 20:20:07 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 20:20:15 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 20:20:15 2012] Setting source spectrum file to fullrun_mos1_xmm0149670301_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sun May 20 20:20:15 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0149670301_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sun May 20 22:16:59 2012] Not generating rmf since there are only 76 counts
[Sun May 20 22:16:59 2012] rmf not generated due to insufficient counts
[Mon May 21 00:11:33 2012] Updating aperture counts using extracted products
[Mon May 21 00:11:33 2012] Error reading totcts from fullrun_mos1_xmm0149670301_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Mon May 21 00:11:35 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 00:11:35 2012] Using photon index=1.80, rate=0.00281, arf fullrun_mos1_xmm0149670301_pi300-10000_pass1_cl_src15.arf
[Mon May 21 00:11:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 00:11:36 2012] Updating source flux to 6.1e-14
[Mon May 21 00:11:44 2012] Source 15 has fewer than 100.000000 counts, skipping spectral fitting