[Tue May 28 05:42:08 2013] Detection parameters:
  Position = (416.5, 333.7) = 22 0 58.43 -59 55 25.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 81.0 +/- 14.9
  Background counts = 58.3
  Rate = 0.006 +/- 0.001

[Tue May 28 05:42:09 2013] Off-axis axis estimate = 8.93'
[Tue May 28 05:46:04 2013] Using EEF radius (= 10.89 ")to estimate initial spatial extent for simple fitting
[Tue May 28 05:46:04 2013] Initial guess for spatial extent in simple fitting = 10.89"
[Tue May 28 05:46:04 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.997
[Tue May 28 05:46:04 2013] Giving source the simple spatial ID 39 for pass 0, mean size = 10.89"
[Tue May 28 07:29:42 2013] fullrun_pn_xmm0149670101_pi300-10000_cl_pass0_src39.ximg exists
[Tue May 28 07:29:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149670101_pi300-10000_cl_pass0_src39.csv
[Tue May 28 07:29:42 2013] fullrun_pn_xmm0149670101_pi300-10000_cl_pass0_src39_1.ximg exists
[Tue May 28 07:29:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149670101_pi300-10000_cl_pass0_src39.csv
[Tue May 28 07:29:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0149670101_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0149670101_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 07:29:42 2013] fullrun_pn_xmm0149670101_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Tue May 28 07:29:43 2013] fullrun_pn_xmm0149670101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Tue May 28 07:29:43 2013] Fit fullrun_pn_xmm0149670101_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Tue May 28 12:38:08 2013] Warning: source 39 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 39 at 12.746443 pixels away
[Tue May 28 12:38:08 2013] Vigneting correction estimate = 1.000000
[Tue May 28 12:38:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 12:38:08 2013] Assessing source extent using major
[Tue May 28 12:38:08 2013] Source does appear to be extended
[Tue May 28 12:38:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 12:38:36 2013] Using EEF radius (= 10.89 ")to estimate initial spatial extent for simple fitting
[Tue May 28 12:38:36 2013] Initial guess for spatial extent in simple fitting = 10.89"
[Tue May 28 12:38:36 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.997
[Tue May 28 12:38:36 2013] Giving source the simple spatial ID 34 for pass 1, mean size = 10.89"
[Tue May 28 13:38:13 2013] fullrun_pn_xmm0149670101_pi300-10000_cl_pass1_src34.ximg exists
[Tue May 28 13:38:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149670101_pi300-10000_cl_pass1_src34.csv
[Tue May 28 13:38:13 2013] fullrun_pn_xmm0149670101_pi300-10000_cl_pass1_src34_1.ximg exists
[Tue May 28 13:38:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149670101_pi300-10000_cl_pass1_src34.csv
[Tue May 28 13:38:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0149670101_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0149670101_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 13:38:13 2013] fullrun_pn_xmm0149670101_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Tue May 28 13:38:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149670101_pi300-10000_cl_pass1_tfrozen_src34.csv
[Tue May 28 13:38:13 2013] fullrun_pn_xmm0149670101_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Tue May 28 13:38:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149670101_pi300-10000_cl_pass1_tfrozen_src34.csv
[Tue May 28 13:38:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0149670101_pi300-10000_cl_pass1_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0149670101_pi300-10000_cl_pass1_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 16:35:52 2013] Source 39 is offset by -9.547027 and -0.775625 pixels which is larger than
2 X fitted extent = 1.253527 x 1.253527, not incorporating fit results
[Tue May 28 16:35:52 2013] Vigneting correction estimate = 1.000000
[Tue May 28 16:35:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 16:35:52 2013] Assessing source extent using major
[Tue May 28 16:35:52 2013] Source does appear to be extended
[Tue May 28 16:35:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 16:36:12 2013] XMMSAS src. selection expression = ellipse(36184.116638, 28983.833832, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 28 16:36:12 2013] Writing source region out to fullrun_pn_xmm0149670101_pi300-10000_pass1_cl_src39_src.reg
[Tue May 28 16:36:12 2013] Extracting stamp from image fullrun_pn_xmm0149670101_pi300-10000_cl_sm2.00.img.gz, (379, 296) - (454, 371)
[Tue May 28 16:36:12 2013] XMMSAS bgd. selection expression = annulus(36184.116638, 28983.833832, 1087.500000, 2175.000000, X, Y)
[Tue May 28 16:36:12 2013] Writing fullrun_pn_xmm0149670101_pi300-10000_pass1_cl_src39.gif
[Tue May 28 17:07:48 2013] Mean detx,y = (7856.59, -4422.89) 
[Tue May 28 17:07:51 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 28 17:08:10 2013] Binned source spectrum to 10 counts/bin
[Tue May 28 17:08:10 2013] Setting source spectrum file to fullrun_pn_xmm0149670101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Tue May 28 17:08:10 2013] Setting bgd. spectrum file to fullrun_pn_xmm0149670101_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Tue May 28 20:00:08 2013] Not generating rmf since there are only 80 counts
[Tue May 28 20:00:08 2013] rmf not generated due to insufficient counts
[Tue May 28 22:48:01 2013] Updating aperture counts using extracted products
[Tue May 28 22:48:01 2013] Total counts from fullrun_pn_xmm0149670101_pi300-10000_pass1_cl_src39_src_b10.pi.gz = 454.00
[Tue May 28 22:48:01 2013] Total counts from fullrun_pn_xmm0149670101_pi300-10000_pass1_cl_src39_bgd.pi.gz = 3112.00
[Tue May 28 22:48:02 2013] Got source and background scale factors 1342400.000000, 10690013.000000
[Tue May 28 22:48:02 2013] User source parameters:
  Position = (416.5, 333.7) = 22 0 58.43 -59 55 25.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 63.2 +/- 22.3
  Background aperture counts = 390.8
  Rate = 0.003 +/- 0.001

[Tue May 28 22:48:02 2013] Updating counts from extracted products
[Tue May 28 22:48:02 2013] Set source signif. to 63.21/19.77 = 3.20
[Tue May 28 22:48:03 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 28 22:48:03 2013] Using photon index=1.80, rate=0.00298, arf fullrun_pn_xmm0149670101_pi300-10000_pass1_cl_src39.arf
[Tue May 28 22:48:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 28 22:48:03 2013] Updating source flux to 1.3e-14
[Tue May 28 22:48:23 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 28 22:48:27 2013] xmm0149670101/analysis//spectral/fullrun_pn_xmm0149670101_pi300-10000_pass1_cl_src39_pl.csv not found, spectral fit skipped or did not complete