[Tue May 28 05:42:04 2013] Detection parameters:
  Position = (323.0, 315.0) = 22 1 52.49 -59 56 47.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4003.8 +/- 88.0
  Background counts = 383.7
  Rate = 0.2 +/- 0.004

[Tue May 28 05:42:09 2013] Off-axis axis estimate = 2.15'
[Tue May 28 05:46:04 2013] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Tue May 28 05:46:04 2013] Initial guess for spatial extent in simple fitting = 7.50"
[Tue May 28 05:46:04 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.808
[Tue May 28 05:46:04 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.50"
[Tue May 28 07:29:41 2013] fullrun_pn_xmm0149670101_pi300-10000_cl_pass0_src1.ximg exists
[Tue May 28 07:29:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149670101_pi300-10000_cl_pass0_src1.csv
[Tue May 28 07:29:41 2013] fullrun_pn_xmm0149670101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue May 28 07:29:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149670101_pi300-10000_cl_pass0_src1.csv
[Tue May 28 07:29:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0149670101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0149670101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 07:29:42 2013] fullrun_pn_xmm0149670101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue May 28 07:29:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149670101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue May 28 07:29:42 2013] fullrun_pn_xmm0149670101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue May 28 07:29:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149670101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue May 28 07:29:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0149670101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0149670101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 12:38:07 2013] Spatial fit model total counts = 21403.900000, observed total counts = 18290.000000
[Tue May 28 12:38:07 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 28 12:38:07 2013] Spatial fit model total counts = 14233.100000, observed total counts = 9302.000000
[Tue May 28 12:38:07 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 28 12:38:07 2013] Source 1 is offset by -5.762103 and 1.962505 pixels which is larger than
2 X fitted extent = 5.134437 x 5.134437, not incorporating fit results
[Tue May 28 12:38:08 2013] Vigneting correction estimate = 1.000000
[Tue May 28 12:38:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 12:38:08 2013] Assessing source extent using major
[Tue May 28 12:38:08 2013] Source does appear to be extended
[Tue May 28 12:38:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 12:38:36 2013] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Tue May 28 12:38:36 2013] Initial guess for spatial extent in simple fitting = 7.50"
[Tue May 28 12:38:36 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.808
[Tue May 28 12:38:36 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.50"
[Tue May 28 13:38:12 2013] fullrun_pn_xmm0149670101_pi300-10000_cl_pass1_src1.ximg exists
[Tue May 28 13:38:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149670101_pi300-10000_cl_pass1_src1.csv
[Tue May 28 13:38:12 2013] fullrun_pn_xmm0149670101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue May 28 13:38:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149670101_pi300-10000_cl_pass1_src1.csv
[Tue May 28 13:38:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0149670101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0149670101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 13:38:13 2013] fullrun_pn_xmm0149670101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue May 28 13:38:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149670101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue May 28 13:38:13 2013] fullrun_pn_xmm0149670101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue May 28 13:38:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149670101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue May 28 13:38:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0149670101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0149670101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 16:35:51 2013] Spatial fit model total counts = 21411.300000, observed total counts = 18290.000000
[Tue May 28 16:35:51 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 28 16:35:52 2013] Source 1 is offset by -5.762103 and 1.962758 pixels which is larger than
2 X fitted extent = 5.139632 x 5.139632, not incorporating fit results
[Tue May 28 16:35:52 2013] Vigneting correction estimate = 1.000000
[Tue May 28 16:35:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 16:35:52 2013] Assessing source extent using major
[Tue May 28 16:35:52 2013] Source does appear to be extended
[Tue May 28 16:35:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 16:36:11 2013] Counts = 4003.828125, rescaling region sizes by 2.000000
[Tue May 28 16:36:11 2013] XMMSAS src. selection expression = ellipse(28055.001038, 27358.331970, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue May 28 16:36:11 2013] Writing source region out to fullrun_pn_xmm0149670101_pi300-10000_pass1_cl_src1_src.reg
[Tue May 28 16:36:11 2013] Extracting stamp from image fullrun_pn_xmm0149670101_pi300-10000_cl_sm2.00.img.gz, (248, 240) - (398, 390)
[Tue May 28 16:36:11 2013] XMMSAS bgd. selection expression = annulus(28055.001038, 27358.331970, 4350.000000, 8700.000000, X, Y) && !ellipse(28755.604858, 28177.339478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29217.866699, 26669.195221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36014.606293, 20393.676376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27986.753510, 28445.213348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26685.627600, 29906.522400, 400.138412, 400.138412, 0.000000, X, Y) && !ellipse(25432.740112, 26228.770996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30022.302000, 25241.758000, 1134.248033, 1134.248033, 0.000000, X, Y) && !ellipse(21290.740417, 34773.040253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28487.545135, 30130.190521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25694.103851, 25616.040680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28556.214813, 24503.665710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27641.964400, 24818.078000, 1187.152034, 1187.152034, 0.000000, X, Y) && !ellipse(35851.276855, 34548.639832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28838.404602, 33584.521698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25355.093674, 33371.501800, 812.632023, 452.888013, 316.198345, X, Y) && !ellipse(26871.025238, 31910.047821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25131.569519, 28221.564301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24920.361938, 27625.231445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27501.084930, 24142.236572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27061.709442, 24054.392273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27260.302979, 30933.583801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36184.116638, 28983.833832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24517.559479, 26829.564301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25974.448395, 23552.620941, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 28 16:36:11 2013] Writing fullrun_pn_xmm0149670101_pi300-10000_pass1_cl_src1.gif
[Tue May 28 16:36:32 2013] Mean detx,y = (528.87, -405.14) 
[Tue May 28 16:36:38 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 28 16:39:35 2013] Binned source spectrum to 10 counts/bin
[Tue May 28 16:39:35 2013] Setting source spectrum file to fullrun_pn_xmm0149670101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue May 28 16:39:35 2013] Setting bgd. spectrum file to fullrun_pn_xmm0149670101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue May 28 17:09:32 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 28 17:09:32 2013] rmf not generated due to insufficient counts
[Tue May 28 22:47:55 2013] Updating aperture counts using extracted products
[Tue May 28 22:47:55 2013] Total counts from fullrun_pn_xmm0149670101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 41192.00
[Tue May 28 22:47:55 2013] Total counts from fullrun_pn_xmm0149670101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 58144.00
[Tue May 28 22:47:55 2013] Got source and background scale factors 4647079.000000, 149487282.000000
[Tue May 28 22:47:55 2013] User source parameters:
  Position = (323.0, 315.0) = 22 1 52.49 -59 56 47.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 39384.5 +/- 204.0
  Background aperture counts = 1807.5
  Rate = 2 +/- 0.01

[Tue May 28 22:47:55 2013] Updating counts from extracted products
[Tue May 28 22:47:55 2013] Set source signif. to 39384.49/42.51 = 926.37
[Tue May 28 22:48:02 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 28 22:48:02 2013] Using photon index=1.80, rate=1.86, arf fullrun_pn_xmm0149670101_pi300-10000_pass1_cl_src1.arf
[Tue May 28 22:48:02 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 28 22:48:02 2013] Updating source flux to 4.7e-12
[Tue May 28 22:48:23 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 28 22:48:27 2013] xmm0149670101/analysis//spectral/fullrun_pn_xmm0149670101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete