[Tue May 28 05:42:20 2013] Detection parameters:
  Position = (305.0, 288.2) = 22 2 2.92 -59 58 43.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.6 +/- 19.6
  Background counts = 90.3
  Rate = 0.004 +/- 0.0008

[Tue May 28 05:42:21 2013] Off-axis axis estimate = 0.88'
[Tue May 28 10:07:00 2013] Using EEF radius (= 6.87 ")to estimate initial spatial extent for simple fitting
[Tue May 28 10:07:00 2013] Initial guess for spatial extent in simple fitting = 6.87"
[Tue May 28 10:07:00 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.926
[Tue May 28 10:07:00 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 6.87"
[Tue May 28 12:37:55 2013] fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_src29.ximg exists
[Tue May 28 12:37:55 2013] fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_src29_1.ximg exists
[Tue May 28 12:37:55 2013] Fit fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_src29 appears to have run properly
[Tue May 28 12:37:56 2013] fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Tue May 28 12:37:56 2013] fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Tue May 28 12:37:56 2013] Fit fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Tue May 28 12:38:25 2013] Spatial fit model total counts = 1734.180000, observed total counts = 1736.000000
[Tue May 28 12:38:25 2013] Offset between fit and detection position for source 36 = 8.620277 pixels
[Tue May 28 12:38:25 2013] 1765.652700 total counts/ 1666.210000 bgd. counts: snr = 2.436173
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 8.620277 pixels
  Position = (311.3, 294.1) = 22 1 59.27 -59 58 18.7
  Extent = 13.7 (13.7-27.5)", rotation angle = 0
  Source counts = 99.4 +/- 42.0
  Background counts = 1666.2
  Rate = 0.004 +/- 0.002
[Tue May 28 12:38:25 2013] Vigneting correction estimate = 1.000000
[Tue May 28 12:38:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 12:38:25 2013] Assessing source extent using major axis lower bound
[Tue May 28 12:38:25 2013] Source does appear to be extended
[Tue May 28 12:38:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 15:02:47 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 28 15:02:47 2013] Initial guess for spatial extent in simple fitting = 13.74"
[Tue May 28 15:02:47 2013] source mask rpix=3.2, npix_max = 53, mask sum = 55, frac = 1.028
[Tue May 28 15:02:47 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 13.74"
[Tue May 28 16:35:43 2013] fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_src25.ximg exists
[Tue May 28 16:35:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_src25.csv
[Tue May 28 16:35:43 2013] fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_src25_1.ximg exists
[Tue May 28 16:35:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_src25.csv
[Tue May 28 16:35:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 16:35:43 2013] fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Tue May 28 16:35:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Tue May 28 16:35:43 2013] fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Tue May 28 16:35:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Tue May 28 16:35:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 16:36:02 2013] Warning, spatial fit 25 centroid is now closest to src. 34
[Tue May 28 16:36:02 2013] Vigneting correction estimate = 1.000000
[Tue May 28 16:36:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 16:36:02 2013] Assessing source extent using major axis lower bound
[Tue May 28 16:36:02 2013] Source does appear to be extended
[Tue May 28 16:36:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 21:29:52 2013] XMMSAS src. selection expression = ellipse(27035.946000, 25539.302000, 824.172024, 824.172024, 0.000000, X, Y)
[Tue May 28 21:29:52 2013] Writing source region out to fullrun_mos2_xmm0149670101_pi300-10000_pass1_cl_src36_src.reg
[Tue May 28 21:29:52 2013] Extracting stamp from image fullrun_mos2_xmm0149670101_pi300-10000_cl_sm2.00.img.gz, (264, 247) - (359, 341)
[Tue May 28 21:29:52 2013] XMMSAS bgd. selection expression = annulus(27035.946000, 25539.302000, 1373.620040, 2747.240079, X, Y) && !ellipse(27725.474000, 27636.038000, 723.435221, 723.435221, 0.000000, X, Y) && !ellipse(28463.599426, 27000.054352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28634.049652, 27692.512543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27221.621857, 27804.695496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28471.086000, 26300.050000, 713.352021, 713.352021, 0.000000, X, Y) && !ellipse(26789.721800, 27084.852000, 803.384023, 803.384023, 0.000000, X, Y) && !ellipse(26785.307617, 26677.404572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26778.932000, 28657.168000, 1068.568031, 1068.568031, 0.000000, X, Y) && !ellipse(29561.206000, 27329.378000, 1332.816038, 1332.816038, 0.000000, X, Y) && !ellipse(27790.055664, 25100.763214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29351.146515, 26152.146851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27763.340000, 28720.320000, 1274.360037, 1274.360037, 0.000000, X, Y) && !ellipse(29368.305969, 25447.839264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25710.506622, 25965.548737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25605.502869, 26835.384125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30215.990448, 27443.014130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29870.478210, 27011.683380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28267.639679, 24592.253418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26094.699982, 25529.425659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27057.640000, 29943.436000, 2548.720073, 2548.720073, 0.000000, X, Y) && !ellipse(30000.354279, 27861.300720, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 28 21:29:52 2013] Writing fullrun_mos2_xmm0149670101_pi300-10000_pass1_cl_src36.gif
[Tue May 28 21:34:45 2013] Mean detx,y = (27.37, -1539.07) 
[Tue May 28 21:34:46 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 28 21:34:56 2013] Binned source spectrum to 10 counts/bin
[Tue May 28 21:34:56 2013] Setting source spectrum file to fullrun_mos2_xmm0149670101_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Tue May 28 21:34:56 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0149670101_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Tue May 28 22:16:21 2013] Not generating rmf since there are only 99 counts
[Tue May 28 22:16:21 2013] rmf not generated due to insufficient counts
[Tue May 28 22:48:09 2013] Updating aperture counts using extracted products
[Tue May 28 22:48:09 2013] Total counts from fullrun_mos2_xmm0149670101_pi300-10000_pass1_cl_src36_src_b10.pi.gz = 2863.00
[Tue May 28 22:48:09 2013] Total counts from fullrun_mos2_xmm0149670101_pi300-10000_pass1_cl_src36_bgd.pi.gz = 2911.00
[Tue May 28 22:48:09 2013] Got source and background scale factors 1929184.000000, 6579388.000000
[Tue May 28 22:48:09 2013] User source parameters:
  Position = (311.3, 294.1) = 22 1 59.27 -59 58 18.7
  Extent = 13.7 (13.7-27.5)", rotation angle = 0
  Source aperture counts = 2009.4 +/- 54.5
  Background aperture counts = 853.6
  Rate = 0.08 +/- 0.002

[Tue May 28 22:48:10 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 28 22:48:10 2013] Using photon index=1.80, rate=0.00414, arf fullrun_mos2_xmm0149670101_pi300-10000_pass1_cl_src36.arf
[Tue May 28 22:48:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 28 22:48:10 2013] Updating source flux to 4.4e-14
[Tue May 28 22:48:18 2013] Source 36 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 28 22:48:23 2013] xmm0149670101/analysis//spectral/fullrun_mos2_xmm0149670101_pi300-10000_pass1_cl_src36_pl.csv not found, spectral fit skipped or did not complete