[Tue May 28 05:42:18 2013] Detection parameters:
  Position = (294.9, 309.0) = 22 2 8.79 -59 57 13.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 154.7 +/- 22.1
  Background counts = 93.9
  Rate = 0.006 +/- 0.0009

[Tue May 28 05:42:21 2013] Off-axis axis estimate = 0.81'
[Tue May 28 10:07:00 2013] Using EEF radius (= 6.83 ")to estimate initial spatial extent for simple fitting
[Tue May 28 10:07:00 2013] Initial guess for spatial extent in simple fitting = 6.83"
[Tue May 28 10:07:00 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.933
[Tue May 28 10:07:00 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 6.83"
[Tue May 28 12:37:55 2013] fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_src22.ximg exists
[Tue May 28 12:37:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_src22.csv
[Tue May 28 12:37:55 2013] fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_src22_1.ximg exists
[Tue May 28 12:37:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_src22.csv
[Tue May 28 12:37:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 12:37:56 2013] fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Tue May 28 12:37:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Tue May 28 12:37:56 2013] fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Tue May 28 12:37:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Tue May 28 12:37:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 12:38:25 2013] Warning, spatial fit 22 centroid is now closest to src. 41
[Tue May 28 12:38:25 2013] Source 22 is offset by 3.702286 and -7.425079 pixels which is larger than
2 X fitted extent = 0.804405 x 1.655687, not incorporating fit results
[Tue May 28 12:38:25 2013] Vigneting correction estimate = 1.000000
[Tue May 28 12:38:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 12:38:25 2013] Assessing source extent using major
[Tue May 28 12:38:25 2013] Source does appear to be extended
[Tue May 28 12:38:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 15:02:47 2013] Using EEF radius (= 6.83 ")to estimate initial spatial extent for simple fitting
[Tue May 28 15:02:47 2013] Initial guess for spatial extent in simple fitting = 6.83"
[Tue May 28 15:02:47 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.933
[Tue May 28 15:02:47 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 6.83"
[Tue May 28 16:35:43 2013] fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_src19.ximg exists
[Tue May 28 16:35:43 2013] fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_src19_1.ximg exists
[Tue May 28 16:35:43 2013] Fit fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_src19 appears to have run properly
[Tue May 28 16:35:43 2013] fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Tue May 28 16:35:43 2013] fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Tue May 28 16:35:43 2013] Fit fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Tue May 28 16:36:02 2013] Source 22 is offset by -4.793852 and -3.191622 pixels which is larger than
2 X fitted extent = 0.785407 x 6.032000, not incorporating fit results
[Tue May 28 16:36:02 2013] Vigneting correction estimate = 1.000000
[Tue May 28 16:36:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 16:36:02 2013] Assessing source extent using major
[Tue May 28 16:36:02 2013] Source does appear to be extended
[Tue May 28 16:36:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 21:29:52 2013] XMMSAS src. selection expression = ellipse(25605.502869, 26835.384125, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 28 21:29:52 2013] Writing source region out to fullrun_mos2_xmm0149670101_pi300-10000_pass1_cl_src22_src.reg
[Tue May 28 21:29:52 2013] Extracting stamp from image fullrun_mos2_xmm0149670101_pi300-10000_cl_sm2.00.img.gz, (257, 272) - (332, 347)
[Tue May 28 21:29:52 2013] XMMSAS bgd. selection expression = annulus(25605.502869, 26835.384125, 1087.500000, 2175.000000, X, Y) && !ellipse(27725.474000, 27636.038000, 723.435221, 723.435221, 0.000000, X, Y) && !ellipse(28463.599426, 27000.054352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28634.049652, 27692.512543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27221.621857, 27804.695496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28471.086000, 26300.050000, 713.352021, 713.352021, 0.000000, X, Y) && !ellipse(26789.721800, 27084.852000, 803.384023, 803.384023, 0.000000, X, Y) && !ellipse(26785.307617, 26677.404572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26778.932000, 28657.168000, 1068.568031, 1068.568031, 0.000000, X, Y) && !ellipse(27790.055664, 25100.763214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27763.340000, 28720.320000, 1274.360037, 1274.360037, 0.000000, X, Y) && !ellipse(25710.506622, 25965.548737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28267.639679, 24592.253418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26094.699982, 25529.425659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27035.946000, 25539.302000, 1098.896032, 1098.896032, 0.000000, X, Y) && !ellipse(27057.640000, 29943.436000, 2548.720073, 2548.720073, 0.000000, X, Y)
[Tue May 28 21:29:52 2013] Writing fullrun_mos2_xmm0149670101_pi300-10000_pass1_cl_src22.gif
[Tue May 28 21:33:37 2013] Mean detx,y = (1694.83, -816.09) 
[Tue May 28 21:33:38 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 28 21:33:46 2013] Binned source spectrum to 10 counts/bin
[Tue May 28 21:33:46 2013] Setting source spectrum file to fullrun_mos2_xmm0149670101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Tue May 28 21:33:46 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0149670101_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Tue May 28 22:15:55 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 28 22:15:55 2013] rmf not generated due to insufficient counts
[Tue May 28 22:48:08 2013] Updating aperture counts using extracted products
[Tue May 28 22:48:08 2013] Total counts from fullrun_mos2_xmm0149670101_pi300-10000_pass1_cl_src22_src_b10.pi.gz = 1296.00
[Tue May 28 22:48:08 2013] Total counts from fullrun_mos2_xmm0149670101_pi300-10000_pass1_cl_src22_bgd.pi.gz = 1950.00
[Tue May 28 22:48:08 2013] Got source and background scale factors 1337600.000000, 4560000.000000
[Tue May 28 22:48:08 2013] User source parameters:
  Position = (294.9, 309.0) = 22 2 8.79 -59 57 13.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 724.0 +/- 37.0
  Background aperture counts = 572.0
  Rate = 0.03 +/- 0.002

[Tue May 28 22:48:08 2013] Updating counts from extracted products
[Tue May 28 22:48:08 2013] Set source signif. to 724.00/23.92 = 30.27
[Tue May 28 22:48:10 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 28 22:48:10 2013] Using photon index=1.80, rate=0.0302, arf fullrun_mos2_xmm0149670101_pi300-10000_pass1_cl_src22.arf
[Tue May 28 22:48:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 28 22:48:10 2013] Updating source flux to 3.5e-13
[Tue May 28 22:48:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 28 22:48:23 2013] xmm0149670101/analysis//spectral/fullrun_mos2_xmm0149670101_pi300-10000_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete