[Tue May 28 05:42:17 2013] Detection parameters:
  Position = (334.0, 336.8) = 22 1 46.13 -59 55 11.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 135.0 +/- 19.4
  Background counts = 150.6
  Rate = 0.007 +/- 0.001

[Tue May 28 05:42:21 2013] Off-axis axis estimate = 3.79'
[Tue May 28 10:07:00 2013] Using EEF radius (= 8.32 ")to estimate initial spatial extent for simple fitting
[Tue May 28 10:07:00 2013] Initial guess for spatial extent in simple fitting = 8.32"
[Tue May 28 10:07:00 2013] source mask rpix=1.9, npix_max = 23, mask sum = 13, frac = 0.558
[Tue May 28 10:07:00 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 8.32"
[Tue May 28 12:37:55 2013] fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_src19.ximg exists
[Tue May 28 12:37:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_src19.csv
[Tue May 28 12:37:55 2013] fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_src19_1.ximg exists
[Tue May 28 12:37:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_src19.csv
[Tue May 28 12:37:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 12:37:56 2013] fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Tue May 28 12:37:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_tfrozen_src19.csv
[Tue May 28 12:37:56 2013] fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Tue May 28 12:37:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_tfrozen_src19.csv
[Tue May 28 12:37:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 12:38:25 2013] Source 17 is offset by 4.487694 and 5.187686 pixels which is larger than
2 X fitted extent = 4.800782 x 4.800782, not incorporating fit results
[Tue May 28 12:38:25 2013] Vigneting correction estimate = 1.000000
[Tue May 28 12:38:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 12:38:25 2013] Assessing source extent using major
[Tue May 28 12:38:25 2013] Source does appear to be extended
[Tue May 28 12:38:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 15:02:47 2013] Using EEF radius (= 8.32 ")to estimate initial spatial extent for simple fitting
[Tue May 28 15:02:47 2013] Initial guess for spatial extent in simple fitting = 8.32"
[Tue May 28 15:02:47 2013] source mask rpix=1.9, npix_max = 23, mask sum = 13, frac = 0.558
[Tue May 28 15:02:47 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 8.32"
[Tue May 28 16:35:43 2013] fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_src16.ximg exists
[Tue May 28 16:35:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_src16.csv
[Tue May 28 16:35:43 2013] fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_src16_1.ximg exists
[Tue May 28 16:35:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_src16.csv
[Tue May 28 16:35:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 16:35:43 2013] fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Tue May 28 16:35:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Tue May 28 16:35:43 2013] fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Tue May 28 16:35:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Tue May 28 16:35:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 16:36:02 2013] Source 17 is offset by 4.476452 and 5.176560 pixels which is larger than
2 X fitted extent = 4.851127 x 4.851127, not incorporating fit results
[Tue May 28 16:36:02 2013] Vigneting correction estimate = 1.000000
[Tue May 28 16:36:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 16:36:02 2013] Assessing source extent using major
[Tue May 28 16:36:02 2013] Source does appear to be extended
[Tue May 28 16:36:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 21:29:52 2013] XMMSAS src. selection expression = ellipse(29012.237335, 29250.114685, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 28 21:29:52 2013] Writing source region out to fullrun_mos2_xmm0149670101_pi300-10000_pass1_cl_src17_src.reg
[Tue May 28 21:29:52 2013] Extracting stamp from image fullrun_mos2_xmm0149670101_pi300-10000_cl_sm2.00.img.gz, (297, 299) - (372, 374)
[Tue May 28 21:29:52 2013] XMMSAS bgd. selection expression = annulus(29012.237335, 29250.114685, 1087.500000, 2175.000000, X, Y) && !ellipse(27725.474000, 27636.038000, 723.435221, 723.435221, 0.000000, X, Y) && !ellipse(28463.599426, 27000.054352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28634.049652, 27692.512543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27221.621857, 27804.695496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26789.721800, 27084.852000, 803.384023, 803.384023, 0.000000, X, Y) && !ellipse(26785.307617, 26677.404572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26778.932000, 28657.168000, 1068.568031, 1068.568031, 0.000000, X, Y) && !ellipse(29561.206000, 27329.378000, 1332.816038, 1332.816038, 0.000000, X, Y) && !ellipse(27763.340000, 28720.320000, 1274.360037, 1274.360037, 0.000000, X, Y) && !ellipse(30215.990448, 27443.014130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29870.478210, 27011.683380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27057.640000, 29943.436000, 2548.720073, 2548.720073, 0.000000, X, Y) && !ellipse(30000.354279, 27861.300720, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 28 21:29:52 2013] Writing fullrun_mos2_xmm0149670101_pi300-10000_pass1_cl_src17.gif
[Tue May 28 21:33:00 2013] Mean detx,y = (-805.68, 2399.37) 
[Tue May 28 21:33:01 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 28 21:33:10 2013] Binned source spectrum to 10 counts/bin
[Tue May 28 21:33:10 2013] Setting source spectrum file to fullrun_mos2_xmm0149670101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue May 28 21:33:10 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0149670101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Tue May 28 22:15:28 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 28 22:15:28 2013] rmf not generated due to insufficient counts
[Tue May 28 22:48:08 2013] Updating aperture counts using extracted products
[Tue May 28 22:48:08 2013] Total counts from fullrun_mos2_xmm0149670101_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 1414.00
[Tue May 28 22:48:08 2013] Total counts from fullrun_mos2_xmm0149670101_pi300-10000_pass1_cl_src17_bgd.pi.gz = 1535.00
[Tue May 28 22:48:08 2013] Got source and background scale factors 1127504.000000, 3096448.000000
[Tue May 28 22:48:08 2013] User source parameters:
  Position = (334.0, 336.8) = 22 1 46.13 -59 55 11.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 855.1 +/- 38.6
  Background aperture counts = 558.9
  Rate = 0.04 +/- 0.002

[Tue May 28 22:48:08 2013] Updating counts from extracted products
[Tue May 28 22:48:08 2013] Set source signif. to 855.06/23.64 = 36.17
[Tue May 28 22:48:10 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 28 22:48:10 2013] Using photon index=1.80, rate=0.0356, arf fullrun_mos2_xmm0149670101_pi300-10000_pass1_cl_src17.arf
[Tue May 28 22:48:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 28 22:48:10 2013] Updating source flux to 4.1e-13
[Tue May 28 22:48:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 28 22:48:23 2013] xmm0149670101/analysis//spectral/fullrun_mos2_xmm0149670101_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete