[Tue May 28 05:42:15 2013] Detection parameters:
  Position = (320.5, 316.1) = 22 1 53.95 -59 56 43.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1476.2 +/- 50.6
  Background counts = 155.3
  Rate = 0.06 +/- 0.002

[Tue May 28 05:42:21 2013] Off-axis axis estimate = 2.05'
[Tue May 28 10:07:00 2013] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Tue May 28 10:07:00 2013] Initial guess for spatial extent in simple fitting = 7.45"
[Tue May 28 10:07:00 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.021
[Tue May 28 10:07:00 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.45"
[Tue May 28 12:37:55 2013] fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_src1.ximg exists
[Tue May 28 12:37:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_src1.csv
[Tue May 28 12:37:55 2013] fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue May 28 12:37:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_src1.csv
[Tue May 28 12:37:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 12:37:56 2013] fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue May 28 12:37:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue May 28 12:37:56 2013] fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue May 28 12:37:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue May 28 12:37:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0149670101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 12:38:25 2013] Warning, spatial fit 1 centroid is now closest to src. 8
[Tue May 28 12:38:25 2013] Spatial fit model total counts = 7220.160000, observed total counts = 6225.000000
[Tue May 28 12:38:25 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 28 12:38:25 2013] Spatial fit model total counts = 5653.290000, observed total counts = 5621.000000
[Tue May 28 12:38:25 2013] Offset between fit and detection position for source 1 = 2.533636 pixels
[Tue May 28 12:38:25 2013] Warning, changing simple spatial fit ID from 1 to 4
[Tue May 28 12:38:25 2013] 5641.531000 total counts/ 5384.840000 bgd. counts: snr = 3.498036
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.533636 pixels
  Position = (318.5, 317.6) = 22 1 55.11 -59 56 36.3
  Extent = 12.5 (8.2-14.8)" x 6.1 (3.9-11.7)", rotation angle = 88 (85-90) degrees
  Source counts = 256.7 +/- 75.1
  Background counts = 5384.8
  Rate = 0.01 +/- 0.003
[Tue May 28 12:38:25 2013] Vigneting correction estimate = 1.000000
[Tue May 28 12:38:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 12:38:25 2013] Assessing source extent using major axis lower bound
[Tue May 28 12:38:25 2013] Source does appear to be extended
[Tue May 28 12:38:25 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.71
[Tue May 28 12:38:25 2013] Source is confused with source 8
[Tue May 28 15:02:47 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 28 15:02:47 2013] Initial guess for spatial extent in simple fitting = 9.28"
[Tue May 28 15:02:47 2013] source mask rpix=2.1, npix_max = 27, mask sum = 22, frac = 0.793
[Tue May 28 15:02:47 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 9.28"
[Tue May 28 16:35:42 2013] fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_src1.ximg exists
[Tue May 28 16:35:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_src1.csv
[Tue May 28 16:35:42 2013] fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue May 28 16:35:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_src1.csv
[Tue May 28 16:35:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 16:35:43 2013] fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue May 28 16:35:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue May 28 16:35:43 2013] fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue May 28 16:35:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue May 28 16:35:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0149670101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 16:36:02 2013] Spatial fit model total counts = 9331.230000, observed total counts = 8093.000000
[Tue May 28 16:36:02 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 28 16:36:02 2013] Spatial fit model total counts = 5653.930000, observed total counts = 5621.000000
[Tue May 28 16:36:02 2013] Offset between fit and detection position for source 1 = 0.930357 pixels
[Tue May 28 16:36:02 2013] Warning, changing simple spatial fit ID from 1 to 4
[Tue May 28 16:36:02 2013] 5585.198000 total counts/ 5385.610000 bgd. counts: snr = 2.719675
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.930357 pixels
  Position = (319.2, 318.2) = 22 1 54.68 -59 56 33.8
  Extent = 9.0 (5.4-14.8)", rotation angle = 0
  Source counts = 199.6 +/- 74.7
  Background counts = 5385.6
  Rate = 0.008 +/- 0.003
[Tue May 28 16:36:02 2013] Vigneting correction estimate = 1.000000
[Tue May 28 16:36:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 16:36:02 2013] Assessing source extent using major axis lower bound
[Tue May 28 16:36:02 2013] Source does appear to be extended
[Tue May 28 16:36:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 21:29:52 2013] XMMSAS src. selection expression = ellipse(27725.474000, 27636.038000, 542.576416, 542.576416, 0.000000, X, Y)
[Tue May 28 21:29:52 2013] Writing source region out to fullrun_mos2_xmm0149670101_pi300-10000_pass1_cl_src1_src.reg
[Tue May 28 21:29:52 2013] Extracting stamp from image fullrun_mos2_xmm0149670101_pi300-10000_cl_sm2.00.img.gz, (288, 287) - (350, 349)
[Tue May 28 21:29:52 2013] XMMSAS bgd. selection expression = annulus(27725.474000, 27636.038000, 904.294026, 1808.588052, X, Y) && !ellipse(28463.599426, 27000.054352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28634.049652, 27692.512543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27221.621857, 27804.695496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28471.086000, 26300.050000, 713.352021, 713.352021, 0.000000, X, Y) && !ellipse(26789.721800, 27084.852000, 803.384023, 803.384023, 0.000000, X, Y) && !ellipse(26785.307617, 26677.404572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26778.932000, 28657.168000, 1068.568031, 1068.568031, 0.000000, X, Y) && !ellipse(29561.206000, 27329.378000, 1332.816038, 1332.816038, 0.000000, X, Y) && !ellipse(27790.055664, 25100.763214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29351.146515, 26152.146851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27763.340000, 28720.320000, 1274.360037, 1274.360037, 0.000000, X, Y) && !ellipse(29012.237335, 29250.114685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29368.305969, 25447.839264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25710.506622, 25965.548737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25605.502869, 26835.384125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30215.990448, 27443.014130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29870.478210, 27011.683380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26094.699982, 25529.425659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27035.946000, 25539.302000, 1098.896032, 1098.896032, 0.000000, X, Y) && !ellipse(27057.640000, 29943.436000, 2548.720073, 2548.720073, 0.000000, X, Y) && !ellipse(30000.354279, 27861.300720, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 28 21:29:52 2013] Writing fullrun_mos2_xmm0149670101_pi300-10000_pass1_cl_src1.gif
[Tue May 28 21:29:55 2013] Mean detx,y = (-41.43, 531.24) 
[Tue May 28 21:29:56 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 28 21:30:06 2013] Binned source spectrum to 10 counts/bin
[Tue May 28 21:30:06 2013] Setting source spectrum file to fullrun_mos2_xmm0149670101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue May 28 21:30:06 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0149670101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue May 28 22:48:06 2013] Updating aperture counts using extracted products
[Tue May 28 22:48:06 2013] Total counts from fullrun_mos2_xmm0149670101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 3709.00
[Tue May 28 22:48:06 2013] Total counts from fullrun_mos2_xmm0149670101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 78.00
[Tue May 28 22:48:06 2013] Got source and background scale factors 853612.000000, 24000.000000
[Tue May 28 22:48:06 2013] User source parameters:
  Position = (319.2, 318.2) = 22 1 54.68 -59 56 33.8
  Extent = 9.0 (5.4-14.8)", rotation angle = 0
  Source aperture counts = 934.8 +/- 61.9
  Background aperture counts = 2774.2
  Rate = 0.04 +/- 0.003

[Tue May 28 22:48:10 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 28 22:48:10 2013] Using photon index=1.80, rate=0.00831, arf fullrun_mos2_xmm0149670101_pi300-10000_pass1_cl_src1.arf
[Tue May 28 22:48:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 28 22:48:10 2013] Updating source flux to 8.7e-14
[Tue May 28 22:48:18 2013] Flag p found in src. 1 procflags, skipping spectral fitting
[Tue May 28 22:48:18 2013] Flag c found in src. 1 procflags, skipping spectral fitting
[Tue May 28 22:48:23 2013] xmm0149670101/analysis//spectral/fullrun_mos2_xmm0149670101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete