[Tue Jul 31 11:04:01 2012] Detection parameters:
  Position = (390.7, 241.4) = 5 0 14.59 -65 34 9.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.0 +/- 14.3
  Background counts = 50.5
  Rate = 0.005 +/- 0.001

[Tue Jul 31 11:04:01 2012] Off-axis axis estimate = 7.87'
[Tue Jul 31 11:26:20 2012] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Tue Jul 31 11:26:20 2012] Initial guess for spatial extent in simple fitting = 10.36"
[Tue Jul 31 11:26:20 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.903
[Tue Jul 31 11:26:20 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.36"
[Tue Jul 31 11:41:04 2012] fullrun_mos1_xmm0149630301_pi300-10000_cl_pass0_src3.ximg exists
[Tue Jul 31 11:41:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149630301_pi300-10000_cl_pass0_src3.csv
[Tue Jul 31 11:41:04 2012] fullrun_mos1_xmm0149630301_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Jul 31 11:41:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149630301_pi300-10000_cl_pass0_src3.csv
[Tue Jul 31 11:41:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0149630301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0149630301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 11:41:04 2012] fullrun_mos1_xmm0149630301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Jul 31 11:41:04 2012] fullrun_mos1_xmm0149630301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jul 31 11:41:04 2012] Fit fullrun_mos1_xmm0149630301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Jul 31 11:52:53 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 12.778993 pixels away
[Tue Jul 31 11:52:53 2012] Vigneting correction estimate = 1.000000
[Tue Jul 31 11:52:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 31 11:52:53 2012] Assessing source extent using major
[Tue Jul 31 11:52:53 2012] Source does appear to be extended
[Tue Jul 31 11:52:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 31 12:12:35 2012] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Tue Jul 31 12:12:35 2012] Initial guess for spatial extent in simple fitting = 10.36"
[Tue Jul 31 12:12:35 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.903
[Tue Jul 31 12:12:35 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 10.36"
[Tue Jul 31 12:26:29 2012] fullrun_mos1_xmm0149630301_pi300-10000_cl_pass1_src3.ximg exists
[Tue Jul 31 12:26:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149630301_pi300-10000_cl_pass1_src3.csv
[Tue Jul 31 12:26:29 2012] fullrun_mos1_xmm0149630301_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Jul 31 12:26:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149630301_pi300-10000_cl_pass1_src3.csv
[Tue Jul 31 12:26:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0149630301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0149630301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 12:26:29 2012] fullrun_mos1_xmm0149630301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Jul 31 12:26:29 2012] fullrun_mos1_xmm0149630301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jul 31 12:26:29 2012] Fit fullrun_mos1_xmm0149630301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Jul 31 12:37:06 2012] Spatial fit model total counts = 104.672000, observed total counts = 105.000000
[Tue Jul 31 12:37:06 2012] Offset between fit and detection position for source 7 = 0.831936 pixels
[Tue Jul 31 12:37:06 2012] 107.639500 total counts/ 82.041600 bgd. counts: snr = 2.826098
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.831936 pixels
  Position = (390.3, 240.7) = 5 0 14.88 -65 34 11.8
  Extent = 5.4 (3.5-8.2)", rotation angle = 0
  Source counts = 25.6 +/- 10.4
  Background counts = 82.0
  Rate = 0.001 +/- 0.0005
[Tue Jul 31 12:37:06 2012] Vigneting correction estimate = 1.000000
[Tue Jul 31 12:37:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 31 12:37:06 2012] Assessing source extent using major axis lower bound
[Tue Jul 31 12:37:06 2012] Source does appear to be extended
[Tue Jul 31 12:37:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 31 12:56:55 2012] XMMSAS src. selection expression = ellipse(33909.971600, 20892.863600, 325.086609, 325.086609, 0.000000, X, Y)
[Tue Jul 31 12:56:55 2012] Writing source region out to fullrun_mos1_xmm0149630301_pi300-10000_pass1_cl_src7_src.reg
[Tue Jul 31 12:56:55 2012] Extracting stamp from image fullrun_mos1_xmm0149630301_pi300-10000_cl_sm2.00.img.gz, (372, 222) - (409, 259)
[Tue Jul 31 12:56:55 2012] XMMSAS bgd. selection expression = annulus(33909.971600, 20892.863600, 541.811016, 1083.622031, X, Y)
[Tue Jul 31 12:56:55 2012] Writing fullrun_mos1_xmm0149630301_pi300-10000_pass1_cl_src7.gif
[Tue Jul 31 12:57:54 2012] Mean detx,y = (4399.24, -8790.35) 
[Tue Jul 31 12:57:56 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 31 12:58:10 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 31 12:58:10 2012] Setting source spectrum file to fullrun_mos1_xmm0149630301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Jul 31 12:58:10 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0149630301_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Tue Jul 31 13:05:18 2012] Not generating rmf since there are only 25 counts
[Tue Jul 31 13:05:18 2012] rmf not generated due to insufficient counts
[Tue Jul 31 13:19:26 2012] Updating aperture counts using extracted products
[Tue Jul 31 13:19:26 2012] Error reading totcts from fullrun_mos1_xmm0149630301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Jul 31 13:19:26 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 31 13:19:26 2012] Using photon index=1.80, rate=0.00131, arf fullrun_mos1_xmm0149630301_pi300-10000_pass1_cl_src7.arf
[Tue Jul 31 13:19:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 31 13:19:26 2012] Updating source flux to 2.7e-14
[Tue Jul 31 13:19:28 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting