[Sat Jun 23 12:13:55 2012] Detection parameters:
  Position = (225.1, 224.8) = 18 19 37.91 -20 56 25.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 952.7 +/- 36.8
  Background counts = 33.6
  Rate = 0.03 +/- 0.001

[Sat Jun 23 12:13:56 2012] Off-axis axis estimate = 7.53'
[Sat Jun 23 12:16:34 2012] Using EEF radius (= 10.19 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 12:16:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 23 12:16:34 2012] Initial guess for spatial extent in simple fitting = 10.19"
[Sat Jun 23 12:16:34 2012] source mask rpix=2.3, npix_max = 32, mask sum = 21, frac = 0.649
[Sat Jun 23 12:16:34 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.19"
[Sat Jun 23 13:05:00 2012] fullrun_pn_xmm0149610401_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun 23 13:05:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149610401_pi300-10000_cl_pass0_src1.csv
[Sat Jun 23 13:05:00 2012] fullrun_pn_xmm0149610401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun 23 13:05:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149610401_pi300-10000_cl_pass0_src1.csv
[Sat Jun 23 13:05:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0149610401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0149610401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 13:05:00 2012] fullrun_pn_xmm0149610401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun 23 13:05:00 2012] fullrun_pn_xmm0149610401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun 23 13:05:00 2012] Fit fullrun_pn_xmm0149610401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jun 23 14:53:57 2012] Spatial fit model total counts = 1331.900000, observed total counts = 1241.000000
[Sat Jun 23 14:53:57 2012] Offset between fit and detection position for source 1 = 0.287299 pixels
[Sat Jun 23 14:53:57 2012] 1339.900000 total counts/ 657.507000 bgd. counts: snr = 26.612420
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.287299 pixels
  Position = (225.4, 224.9) = 18 19 37.82 -20 56 26.6
  Extent = 5.4 (5.0-6.0)", rotation angle = 0
  Source counts = 682.4 +/- 36.6
  Background counts = 657.5
  Rate = 0.02 +/- 0.001
[Sat Jun 23 14:53:57 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 14:53:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 14:53:57 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 14:53:57 2012] Source does appear to be extended
[Sat Jun 23 14:53:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 14:54:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 23 14:54:20 2012] Initial guess for spatial extent in simple fitting = 5.40"
[Sat Jun 23 14:54:20 2012] source mask rpix=1.2, npix_max = 12, mask sum = 10, frac = 0.825
[Sat Jun 23 14:54:20 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.40"
[Sat Jun 23 15:37:43 2012] fullrun_pn_xmm0149610401_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun 23 15:37:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149610401_pi300-10000_cl_pass1_src1.csv
[Sat Jun 23 15:37:43 2012] fullrun_pn_xmm0149610401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun 23 15:37:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149610401_pi300-10000_cl_pass1_src1.csv
[Sat Jun 23 15:37:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0149610401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0149610401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 15:37:43 2012] fullrun_pn_xmm0149610401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun 23 15:37:43 2012] fullrun_pn_xmm0149610401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun 23 15:37:43 2012] Fit fullrun_pn_xmm0149610401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jun 23 17:41:11 2012] Spatial fit model total counts = 1176.100000, observed total counts = 1102.000000
[Sat Jun 23 17:41:11 2012] Offset between fit and detection position for source 1 = 0.008691 pixels
[Sat Jun 23 17:41:11 2012] 1184.830000 total counts/ 524.172000 bgd. counts: snr = 28.856243
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.008691 pixels
  Position = (225.4, 224.9) = 18 19 37.82 -20 56 26.6
  Extent = 5.2 (4.8-5.8)", rotation angle = 0
  Source counts = 660.7 +/- 34.4
  Background counts = 524.2
  Rate = 0.02 +/- 0.001
[Sat Jun 23 17:41:11 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 17:41:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 17:41:11 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 17:41:11 2012] Source does appear to be extended
[Sat Jun 23 17:41:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 17:41:33 2012] XMMSAS src. selection expression = ellipse(19563.010600, 19517.142660, 313.654809, 313.654809, 0.000000, X, Y)
[Sat Jun 23 17:41:33 2012] Writing source region out to fullrun_pn_xmm0149610401_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun 23 17:41:33 2012] Extracting stamp from image fullrun_pn_xmm0149610401_pi300-10000_cl_sm2.00.img.gz, (207, 207) - (243, 243)
[Sat Jun 23 17:41:33 2012] XMMSAS bgd. selection expression = annulus(19563.010600, 19517.142660, 522.758015, 1045.516030, X, Y) && !ellipse(19396.098236, 17702.688690, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 23 17:41:33 2012] Writing fullrun_pn_xmm0149610401_pi300-10000_pass1_cl_src1.gif
[Sat Jun 23 17:41:45 2012] Mean detx,y = (-7280.76, 7981.18) 
[Sat Jun 23 17:41:47 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 23 17:42:02 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 23 17:42:02 2012] Setting source spectrum file to fullrun_pn_xmm0149610401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 23 17:42:02 2012] Setting bgd. spectrum file to fullrun_pn_xmm0149610401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun 23 19:18:14 2012] Updating aperture counts using extracted products
[Sat Jun 23 19:18:14 2012] Error reading totcts from fullrun_pn_xmm0149610401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 23 19:18:15 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 19:18:15 2012] Using photon index=1.80, rate=0.0218, arf fullrun_pn_xmm0149610401_pi300-10000_pass1_cl_src1.arf
[Sat Jun 23 19:18:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 19:18:15 2012] Updating source flux to 1.4e-13
[Sat Jun 23 19:19:36 2012] Reading fit data from xmm0149610401/analysis//spectral/fullrun_pn_xmm0149610401_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jun 23 19:19:36 2012] Spectral fit parameter nH value = 6.9934e+21
[Sat Jun 23 19:19:36 2012] Spectral fit parameter PhoIndex value = 2.36269
[Sat Jun 23 19:19:36 2012] Failed to get F(0.3-8.0) from xmm0149610401/analysis//spectral/fullrun_pn_xmm0149610401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jun 23 19:19:36 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 19:19:36 2012] Using Nh = 7e+21, photon index=2.36, rate=0.0218, arf fullrun_pn_xmm0149610401_pi300-10000_pass1_cl_src1.arf
[Sat Jun 23 19:19:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 19:19:36 2012] Updating source flux to 2.2e-13