[Sat Jun 23 12:14:48 2012] Detection parameters:
  Position = (282.2, 373.3) = 18 19 20.18 -20 45 39.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1496.7 +/- 46.5
  Background counts = 11.5
  Rate = 0.06 +/- 0.002

[Sat Jun 23 12:14:49 2012] Off-axis axis estimate = 5.55'
[Sat Jun 23 13:58:15 2012] Using EEF radius (= 9.20 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 13:58:15 2012] Initial guess for spatial extent in simple fitting = 9.20"
[Sat Jun 23 13:58:15 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.913
[Sat Jun 23 13:58:15 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.20"
[Sat Jun 23 14:53:51 2012] fullrun_mos2_xmm0149610401_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun 23 14:53:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149610401_pi300-10000_cl_pass0_src1.csv
[Sat Jun 23 14:53:51 2012] fullrun_mos2_xmm0149610401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun 23 14:53:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149610401_pi300-10000_cl_pass0_src1.csv
[Sat Jun 23 14:53:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0149610401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0149610401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 14:53:51 2012] fullrun_mos2_xmm0149610401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun 23 14:53:51 2012] fullrun_mos2_xmm0149610401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun 23 14:53:51 2012] Fit fullrun_mos2_xmm0149610401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jun 23 14:54:08 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.658167 pixels away
[Sat Jun 23 14:54:09 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.547219 pixels away
[Sat Jun 23 14:54:09 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 14:54:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 14:54:09 2012] Assessing source extent using major
[Sat Jun 23 14:54:09 2012] Source does appear to be extended
[Sat Jun 23 14:54:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 14:54:09 2012] Source is confused with source 4
[Sat Jun 23 16:32:18 2012] Using EEF radius (= 9.20 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 16:32:18 2012] Initial guess for spatial extent in simple fitting = 9.20"
[Sat Jun 23 16:32:18 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.913
[Sat Jun 23 16:32:18 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 9.20"
[Sat Jun 23 17:41:03 2012] fullrun_mos2_xmm0149610401_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun 23 17:41:03 2012] fullrun_mos2_xmm0149610401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun 23 17:41:03 2012] Fit fullrun_mos2_xmm0149610401_pi300-10000_cl_pass1_src1 appears to have run properly
[Sat Jun 23 17:41:04 2012] fullrun_mos2_xmm0149610401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun 23 17:41:04 2012] fullrun_mos2_xmm0149610401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun 23 17:41:04 2012] Fit fullrun_mos2_xmm0149610401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jun 23 17:41:22 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.658167 pixels away
[Sat Jun 23 17:41:22 2012] Spatial fit model total counts = 1466.500000, observed total counts = 1532.000000
[Sat Jun 23 17:41:22 2012] Offset between fit and detection position for source 3 = 0.210216 pixels
[Sat Jun 23 17:41:22 2012] Warning, changing simple spatial fit ID from 1 to 4
[Sat Jun 23 17:41:22 2012] 1466.781000 total counts/ 597.911000 bgd. counts: snr = 35.533381
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.210216 pixels
  Position = (282.1, 373.4) = 18 19 20.21 -20 45 40.5
  Extent = 5.1 (5.1-5.2)", rotation angle = 0
  Source counts = 868.9 +/- 38.3
  Background counts = 597.9
  Rate = 0.03 +/- 0.001
[Sat Jun 23 17:41:22 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 17:41:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 17:41:22 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 17:41:22 2012] Source does appear to be extended
[Sat Jun 23 17:41:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 18:58:11 2012] XMMSAS src. selection expression = ellipse(24496.986000, 32441.404000, 308.747409, 308.747409, 0.000000, X, Y)
[Sat Jun 23 18:58:11 2012] Writing source region out to fullrun_mos2_xmm0149610401_pi300-10000_pass1_cl_src3_src.reg
[Sat Jun 23 18:58:11 2012] Extracting stamp from image fullrun_mos2_xmm0149610401_pi300-10000_cl_sm2.00.img.gz, (264, 356) - (300, 391)
[Sat Jun 23 18:58:11 2012] XMMSAS bgd. selection expression = annulus(24496.986000, 32441.404000, 514.579015, 1029.158030, X, Y) && !ellipse(23964.463776, 32495.210968, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 23 18:58:11 2012] Writing fullrun_mos2_xmm0149610401_pi300-10000_pass1_cl_src3.gif
[Sat Jun 23 18:58:14 2012] Mean detx,y = (2795.34, 4851.43) 
[Sat Jun 23 18:58:15 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 23 18:58:22 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 23 18:58:22 2012] Setting source spectrum file to fullrun_mos2_xmm0149610401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jun 23 18:58:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0149610401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Jun 23 19:18:16 2012] Updating aperture counts using extracted products
[Sat Jun 23 19:18:16 2012] Error reading totcts from fullrun_mos2_xmm0149610401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jun 23 19:18:16 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 19:18:16 2012] Using photon index=1.80, rate=0.0269, arf fullrun_mos2_xmm0149610401_pi300-10000_pass1_cl_src3.arf
[Sat Jun 23 19:18:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 19:18:16 2012] Updating source flux to 4.6e-13
[Sat Jun 23 19:18:32 2012] Flag c found in src. 3 procflags, skipping spectral fitting
[Sat Jun 23 19:18:45 2012] Reading fit data from xmm0149610401/analysis//spectral/fullrun_mos2_xmm0149610401_pi300-10000_pass1_cl_src3_pl.csv
[Sat Jun 23 19:18:45 2012] Spectral fit parameter nH value = 5.77481e+21
[Sat Jun 23 19:18:45 2012] Spectral fit parameter PhoIndex value = 2.16759
[Sat Jun 23 19:18:45 2012] Failed to get F(0.3-8.0) from xmm0149610401/analysis//spectral/fullrun_mos2_xmm0149610401_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sat Jun 23 19:18:45 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 19:18:45 2012] Using Nh = 5.8e+21, photon index=2.17, rate=0.0269, arf fullrun_mos2_xmm0149610401_pi300-10000_pass1_cl_src3.arf
[Sat Jun 23 19:18:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 19:18:45 2012] Updating source flux to 5.6e-13