[Wed Aug 22 23:38:32 2012] Detection parameters:
  Position = (290.0, 316.1) = 5 40 7.28 -40 52 11.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 151.7 +/- 24.0
  Background counts = 144.5
  Rate = 0.01 +/- 0.002

[Wed Aug 22 23:38:33 2012] Off-axis axis estimate = 1.42'
[Wed Aug 22 23:41:07 2012] Using EEF radius (= 7.14 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 23:41:07 2012] Initial guess for spatial extent in simple fitting = 7.14"
[Wed Aug 22 23:41:07 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.873
[Wed Aug 22 23:41:07 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 7.14"
[Thu Aug 23 01:30:36 2012] fullrun_pn_xmm0149420101_pi300-10000_cl_pass0_src24.ximg exists
[Thu Aug 23 01:30:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149420101_pi300-10000_cl_pass0_src24.csv
[Thu Aug 23 01:30:36 2012] fullrun_pn_xmm0149420101_pi300-10000_cl_pass0_src24_1.ximg exists
[Thu Aug 23 01:30:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149420101_pi300-10000_cl_pass0_src24.csv
[Thu Aug 23 01:30:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0149420101_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0149420101_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 01:30:37 2012] fullrun_pn_xmm0149420101_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Thu Aug 23 01:30:37 2012] fullrun_pn_xmm0149420101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Thu Aug 23 01:30:37 2012] Fit fullrun_pn_xmm0149420101_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Thu Aug 23 05:04:14 2012] Source 27 is offset by 2.675489 and 4.643730 pixels which is larger than
2 X fitted extent = 1.782772 x 1.782772, not incorporating fit results
[Thu Aug 23 05:04:14 2012] Spatial fit model total counts = 2017.020000, observed total counts = 2010.000000
[Thu Aug 23 05:04:14 2012] Offset between fit and detection position for source 27 = 0.649724 pixels
[Thu Aug 23 05:04:14 2012] Warning, changing simple spatial fit ID from 24 to 31
[Thu Aug 23 05:04:14 2012] 2015.627780 total counts/ 2006.280000 bgd. counts: snr = 0.208695
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.649724 pixels
  Position = (289.8, 316.7) = 5 40 7.34 -40 52 8.0
  Extent = 1.7" x 1.7", rotation angle = 0
  Source counts = 9.3 +/- 44.9
  Background counts = 2006.3
  Rate = 0.0006 +/- 0.003
  Deleting source due to low Poisson probability