[Wed Aug 22 23:39:29 2012] Detection parameters:
  Position = (416.2, 247.7) = 5 39 18.83 -40 57 6.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.3 +/- 7.5
  Background counts = 6.5
  Rate = 0.002 +/- 0.0004

[Wed Aug 22 23:39:29 2012] Off-axis axis estimate = 9.30'
[Thu Aug 23 03:40:51 2012] Using EEF radius (= 11.08 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 03:40:51 2012] Initial guess for spatial extent in simple fitting = 11.08"
[Thu Aug 23 03:40:51 2012] source mask rpix=2.5, npix_max = 37, mask sum = 35, frac = 0.943
[Thu Aug 23 03:40:51 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 11.08"
[Thu Aug 23 05:04:02 2012] fullrun_mos2_xmm0149420101_pi300-10000_cl_pass0_src36.ximg exists
[Thu Aug 23 05:04:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149420101_pi300-10000_cl_pass0_src36.csv
[Thu Aug 23 05:04:02 2012] fullrun_mos2_xmm0149420101_pi300-10000_cl_pass0_src36_1.ximg exists
[Thu Aug 23 05:04:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149420101_pi300-10000_cl_pass0_src36.csv
[Thu Aug 23 05:04:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0149420101_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0149420101_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 05:04:03 2012] fullrun_mos2_xmm0149420101_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Thu Aug 23 05:04:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149420101_pi300-10000_cl_pass0_tfrozen_src36.csv
[Thu Aug 23 05:04:03 2012] fullrun_mos2_xmm0149420101_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Thu Aug 23 05:04:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149420101_pi300-10000_cl_pass0_tfrozen_src36.csv
[Thu Aug 23 05:04:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0149420101_pi300-10000_cl_pass0_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0149420101_pi300-10000_cl_pass0_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 05:04:31 2012] Spatial fit model total counts = 97.009200, observed total counts = 81.000000
[Thu Aug 23 05:04:31 2012] Poor agreement between spatial fit and data for source 31
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Aug 23 05:04:31 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 05:04:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 05:04:31 2012] Assessing source extent using major
[Thu Aug 23 05:04:31 2012] Source does appear to be extended
[Thu Aug 23 05:04:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 05:04:31 2012] Deleting source due to low Poisson probability 0.9