[Wed Aug 22 23:39:28 2012] Detection parameters:
  Position = (291.2, 324.1) = 5 40 6.82 -40 51 36.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.1 +/- 17.7
  Background counts = 52.2
  Rate = 0.007 +/- 0.001

[Wed Aug 22 23:39:29 2012] Off-axis axis estimate = 1.93'
[Thu Aug 23 03:40:51 2012] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 03:40:51 2012] Initial guess for spatial extent in simple fitting = 7.39"
[Thu Aug 23 03:40:51 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.827
[Thu Aug 23 03:40:51 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 7.39"
[Thu Aug 23 05:04:01 2012] fullrun_mos2_xmm0149420101_pi300-10000_cl_pass0_src12.ximg exists
[Thu Aug 23 05:04:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149420101_pi300-10000_cl_pass0_src12.csv
[Thu Aug 23 05:04:01 2012] fullrun_mos2_xmm0149420101_pi300-10000_cl_pass0_src12_1.ximg exists
[Thu Aug 23 05:04:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149420101_pi300-10000_cl_pass0_src12.csv
[Thu Aug 23 05:04:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0149420101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0149420101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 05:04:02 2012] fullrun_mos2_xmm0149420101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Thu Aug 23 05:04:02 2012] fullrun_mos2_xmm0149420101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Thu Aug 23 05:04:02 2012] Fit fullrun_mos2_xmm0149420101_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Thu Aug 23 05:04:31 2012] Source 20 is offset by 0.973884 and -8.087898 pixels which is larger than
2 X fitted extent = 0.862717 x 0.862717, not incorporating fit results
[Thu Aug 23 05:04:31 2012] Source 20 is offset by 0.859479 and -7.726588 pixels which is larger than
2 X fitted extent = 0.849936 x 0.849936, not incorporating fit results
[Thu Aug 23 05:04:31 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 05:04:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 05:04:31 2012] Assessing source extent using major
[Thu Aug 23 05:04:31 2012] Source does appear to be extended
[Thu Aug 23 05:04:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 09:33:32 2012] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 09:33:32 2012] Initial guess for spatial extent in simple fitting = 7.39"
[Thu Aug 23 09:33:32 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.827
[Thu Aug 23 09:33:32 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 7.39"
[Thu Aug 23 10:29:36 2012] fullrun_mos2_xmm0149420101_pi300-10000_cl_pass1_src11.ximg exists
[Thu Aug 23 10:29:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149420101_pi300-10000_cl_pass1_src11.csv
[Thu Aug 23 10:29:36 2012] fullrun_mos2_xmm0149420101_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu Aug 23 10:29:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149420101_pi300-10000_cl_pass1_src11.csv
[Thu Aug 23 10:29:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0149420101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0149420101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 10:29:38 2012] fullrun_mos2_xmm0149420101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu Aug 23 10:29:38 2012] fullrun_mos2_xmm0149420101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Aug 23 10:29:38 2012] Fit fullrun_mos2_xmm0149420101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Thu Aug 23 10:30:16 2012] Source 20 is offset by 0.872628 and -7.726588 pixels which is larger than
2 X fitted extent = 0.849936 x 0.849936, not incorporating fit results
[Thu Aug 23 10:30:16 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 10:30:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 10:30:16 2012] Assessing source extent using major
[Thu Aug 23 10:30:16 2012] Source does appear to be extended
[Thu Aug 23 10:30:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 11:27:10 2012] XMMSAS src. selection expression = ellipse(25283.585876, 28145.842865, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Aug 23 11:27:10 2012] Writing source region out to fullrun_mos2_xmm0149420101_pi300-10000_pass1_cl_src20_src.reg
[Thu Aug 23 11:27:10 2012] Extracting stamp from image fullrun_mos2_xmm0149420101_pi300-10000_cl_sm2.00.img.gz, (254, 287) - (329, 362)
[Thu Aug 23 11:27:10 2012] XMMSAS bgd. selection expression = annulus(25283.585876, 28145.842865, 1087.500000, 2175.000000, X, Y) && !ellipse(25295.983800, 29804.016800, 654.287219, 654.287219, 0.000000, X, Y) && !ellipse(25619.155029, 30565.498505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27264.831940, 26093.217200, 355.851210, 355.851210, 0.000000, X, Y) && !ellipse(26237.632000, 29548.826000, 1247.560036, 1247.560036, 0.000000, X, Y) && !ellipse(23735.640076, 30090.917328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24829.560000, 30940.086000, 2824.936081, 2703.880078, 277.634000, X, Y) && !ellipse(26400.747864, 31098.158447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26824.952515, 29085.712616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23812.967804, 28655.746552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26518.113434, 28125.810669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24761.519501, 27711.036682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23463.833200, 28040.701000, 793.089623, 793.089623, 0.000000, X, Y) && !ellipse(27089.167755, 30518.568207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26047.344879, 26855.660583, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug 23 11:27:10 2012] Writing fullrun_mos2_xmm0149420101_pi300-10000_pass1_cl_src20.gif
[Thu Aug 23 11:32:26 2012] Mean detx,y = (1370.57, -3974.19) 
[Thu Aug 23 11:32:29 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 23 11:32:47 2012] grppha failed
[Thu Aug 23 11:32:47 2012] Setting source spectrum file to fullrun_mos2_xmm0149420101_pi300-10000_pass1_cl_src20_src.pi.gz
[Thu Aug 23 11:32:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0149420101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Thu Aug 23 11:41:02 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Aug 23 11:41:02 2012] rmf not generated due to insufficient counts
[Thu Aug 23 11:41:42 2012] Updating aperture counts using extracted products
[Thu Aug 23 11:41:42 2012] Error reading totcts from fullrun_mos2_xmm0149420101_pi300-10000_pass1_cl_src20_src.pi.gz
[Thu Aug 23 11:41:43 2012] No arf file for this source, not re-computing flux
[Thu Aug 23 11:41:46 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Aug 23 11:41:47 2012] xmm0149420101/analysis//spectral/fullrun_mos2_xmm0149420101_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete