[Sun Sep 25 22:20:02 2011] Detection parameters:
  Position = (425.8, 425.9) = 23 19 36.54 8 19 17.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 565.0 +/- 29.0
  Background counts = 10.5
  Rate = 0.01 +/- 0.0007

[Sun Sep 25 22:20:03 2011] Off-axis axis estimate = 13.06'
[Mon Sep 26 00:39:32 2011] Using EEF radius (= 12.96 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 00:39:32 2011] Initial guess for spatial extent in simple fitting = 12.96"
[Mon Sep 26 00:39:32 2011] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.012
[Mon Sep 26 00:39:32 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 12.96"
[Mon Sep 26 01:56:34 2011] fullrun_mos1_xmm0149240101_pi300-10000_cl_pass0_src3.ximg exists
[Mon Sep 26 01:56:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149240101_pi300-10000_cl_pass0_src3.csv
[Mon Sep 26 01:56:34 2011] fullrun_mos1_xmm0149240101_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Sep 26 01:56:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149240101_pi300-10000_cl_pass0_src3.csv
[Mon Sep 26 01:56:34 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0149240101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0149240101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 01:56:35 2011] fullrun_mos1_xmm0149240101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Sep 26 01:56:35 2011] fullrun_mos1_xmm0149240101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Sep 26 01:56:35 2011] Fit fullrun_mos1_xmm0149240101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Sep 26 03:14:12 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 16.374802 pixels away
[Mon Sep 26 03:14:13 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 03:14:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 03:14:13 2011] Assessing source extent using major
[Mon Sep 26 03:14:13 2011] Source does appear to be extended
[Mon Sep 26 03:14:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 05:18:54 2011] Using EEF radius (= 12.96 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 05:18:54 2011] Initial guess for spatial extent in simple fitting = 12.96"
[Mon Sep 26 05:18:54 2011] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.012
[Mon Sep 26 05:18:54 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 12.96"
[Mon Sep 26 06:26:30 2011] fullrun_mos1_xmm0149240101_pi300-10000_cl_pass1_src3.ximg exists
[Mon Sep 26 06:26:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149240101_pi300-10000_cl_pass1_src3.csv
[Mon Sep 26 06:26:30 2011] fullrun_mos1_xmm0149240101_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Sep 26 06:26:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149240101_pi300-10000_cl_pass1_src3.csv
[Mon Sep 26 06:26:30 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0149240101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0149240101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 06:26:30 2011] fullrun_mos1_xmm0149240101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Sep 26 06:26:30 2011] fullrun_mos1_xmm0149240101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Sep 26 06:26:30 2011] Fit fullrun_mos1_xmm0149240101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Sep 26 07:32:04 2011] Spatial fit model total counts = 658.000000, observed total counts = 658.000000
[Mon Sep 26 07:32:04 2011] Offset between fit and detection position for source 4 = 0.354024 pixels
[Mon Sep 26 07:32:04 2011] 655.793000 total counts/ 242.565000 bgd. counts: snr = 26.532347
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.354024 pixels
  Position = (425.4, 425.9) = 23 19 36.64 8 19 17.3
  Extent = 6.8 (6.2-7.5)", rotation angle = 0
  Source counts = 413.2 +/- 25.6
  Background counts = 242.6
  Rate = 0.01 +/- 0.0006
[Mon Sep 26 07:32:04 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 07:32:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 07:32:04 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 07:32:04 2011] Source does appear to be extended
[Mon Sep 26 07:32:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 09:25:36 2011] XMMSAS src. selection expression = ellipse(36962.965800, 37007.004320, 409.079412, 409.079412, 0.000000, X, Y)
[Mon Sep 26 09:25:36 2011] Writing source region out to fullrun_mos1_xmm0149240101_pi300-10000_pass1_cl_src4_src.reg
[Mon Sep 26 09:25:36 2011] Extracting stamp from image fullrun_mos1_xmm0149240101_pi300-10000_cl_sm2.00.img.gz, (402, 402) - (449, 449)
[Mon Sep 26 09:25:36 2011] XMMSAS bgd. selection expression = annulus(36962.965800, 37007.004320, 681.799020, 1363.598039, X, Y) && !ellipse(37772.480000, 35345.433600, 336.974410, 336.974410, 0.000000, X, Y) && !ellipse(35686.558838, 38779.357330, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Sep 26 09:25:36 2011] Writing fullrun_mos1_xmm0149240101_pi300-10000_pass1_cl_src4.gif
[Mon Sep 26 09:27:52 2011] Mean detx,y = (13173.66, 4322.48) 
[Mon Sep 26 09:27:53 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Sep 26 09:27:58 2011] Binned source spectrum to 10 counts/bin
[Mon Sep 26 09:27:58 2011] Setting source spectrum file to fullrun_mos1_xmm0149240101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Sep 26 09:27:58 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0149240101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon Sep 26 11:03:56 2011] Updating aperture counts using extracted products
[Mon Sep 26 11:03:56 2011] Error reading totcts from fullrun_mos1_xmm0149240101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Sep 26 11:03:57 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 11:03:57 2011] Using photon index=1.80, rate=0.0101, arf fullrun_mos1_xmm0149240101_pi300-10000_pass1_cl_src4.arf
[Mon Sep 26 11:03:57 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Sep 26 11:03:57 2011] Updating source flux to 2.5e-13