[Sat Jul  7 20:09:33 2012] Detection parameters:
  Position = (313.6, 268.1) = 16 12 32.57 -52 25 50.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1163.3 +/- 48.6
  Background counts = 304.1
  Rate = 0.2 +/- 0.01

[Sat Jul  7 20:09:34 2012] Off-axis axis estimate = 2.46'
[Sat Jul  7 20:14:13 2012] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Sat Jul  7 20:14:13 2012] Initial guess for spatial extent in simple fitting = 7.66"
[Sat Jul  7 20:14:13 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.979
[Sat Jul  7 20:14:13 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 7.66"
[Sun Jul  8 01:59:13 2012] fullrun_pn_xmm0149180201_pi300-10000_cl_pass0_src6.ximg exists
[Sun Jul  8 01:59:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149180201_pi300-10000_cl_pass0_src6.csv
[Sun Jul  8 01:59:13 2012] fullrun_pn_xmm0149180201_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun Jul  8 01:59:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149180201_pi300-10000_cl_pass0_src6.csv
[Sun Jul  8 01:59:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0149180201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0149180201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul  8 01:59:15 2012] fullrun_pn_xmm0149180201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun Jul  8 01:59:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149180201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sun Jul  8 01:59:15 2012] fullrun_pn_xmm0149180201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Jul  8 01:59:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149180201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sun Jul  8 01:59:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0149180201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0149180201_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 01:38:27 2012] Warning, spatial fit 6 centroid is now closest to src. 2
[Mon Jul  9 01:38:27 2012] Vigneting correction estimate = 1.000000
[Mon Jul  9 01:38:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  9 01:38:27 2012] Assessing source extent using major
[Mon Jul  9 01:38:27 2012] Source does appear to be extended
[Mon Jul  9 01:38:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  9 01:38:27 2012] Source is confused with source 2
[Mon Jul  9 01:38:52 2012] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Mon Jul  9 01:38:52 2012] Initial guess for spatial extent in simple fitting = 7.66"
[Mon Jul  9 01:38:52 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.979
[Mon Jul  9 01:38:52 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 7.66"
[Mon Jul  9 03:20:53 2012] fullrun_pn_xmm0149180201_pi300-10000_cl_pass1_src6.ximg exists
[Mon Jul  9 03:20:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149180201_pi300-10000_cl_pass1_src6.csv
[Mon Jul  9 03:20:53 2012] fullrun_pn_xmm0149180201_pi300-10000_cl_pass1_src6_1.ximg exists
[Mon Jul  9 03:20:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149180201_pi300-10000_cl_pass1_src6.csv
[Mon Jul  9 03:20:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0149180201_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0149180201_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 03:20:54 2012] fullrun_pn_xmm0149180201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Mon Jul  9 03:20:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149180201_pi300-10000_cl_pass1_tfrozen_src6.csv
[Mon Jul  9 03:20:54 2012] fullrun_pn_xmm0149180201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Mon Jul  9 03:20:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149180201_pi300-10000_cl_pass1_tfrozen_src6.csv
[Mon Jul  9 03:20:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0149180201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0149180201_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 11:55:49 2012] Warning, spatial fit 6 centroid is now closest to src. 2
[Sun Jul 15 11:55:49 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 11:55:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 11:55:49 2012] Assessing source extent using major
[Sun Jul 15 11:55:49 2012] Source does appear to be extended
[Sun Jul 15 11:55:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 11:56:19 2012] Counts = 1163.312012, rescaling region sizes by 2.000000
[Sun Jul 15 11:56:19 2012] XMMSAS src. selection expression = ellipse(27236.529846, 23280.469818, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jul 15 11:56:19 2012] Writing source region out to fullrun_pn_xmm0149180201_pi300-10000_pass1_cl_src6_src.reg
[Sun Jul 15 11:56:19 2012] Extracting stamp from image fullrun_pn_xmm0149180201_pi300-10000_cl_sm2.00.img.gz, (239, 193) - (389, 343)
[Sun Jul 15 11:56:19 2012] XMMSAS bgd. selection expression = annulus(27236.529846, 23280.469818, 4350.000000, 8700.000000, X, Y) && !ellipse(24934.407000, 23790.952000, 2137.591262, 2137.591262, 0.000000, X, Y) && !ellipse(26872.610000, 22410.376000, 1323.640038, 1323.640038, 0.000000, X, Y) && !ellipse(25888.321899, 22777.474518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24977.373383, 22428.290375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25773.941800, 24167.864800, 3463.512100, 3463.512100, 0.000000, X, Y) && !ellipse(24158.105682, 22237.847778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26531.282379, 27530.024750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22187.048000, 33016.048000, 2796.768080, 2796.768080, 0.000000, X, Y) && !ellipse(22865.898000, 32361.148000, 1499.592043, 1499.592043, 0.000000, X, Y) && !ellipse(22560.404633, 31186.783325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23169.983429, 31107.108551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22972.709442, 30061.730591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24002.400000, 19934.641600, 1447.736042, 1447.736042, 0.000000, X, Y) && !ellipse(23653.015564, 27959.465118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23772.510800, 27256.360000, 1180.072034, 421.829612, 59.875000, X, Y) && !ellipse(24495.553800, 27634.602000, 1143.408033, 1143.408033, 0.000000, X, Y) && !ellipse(23747.355800, 27061.044000, 1201.968035, 1201.968035, 0.000000, X, Y) && !ellipse(27683.342072, 27176.534149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27061.045685, 27008.096436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27187.034000, 26595.830000, 1079.032031, 1079.032031, 0.000000, X, Y) && !ellipse(28596.782000, 25702.340000, 1190.704034, 1190.704034, 0.000000, X, Y) && !ellipse(28326.617919, 25507.291461, 1190.832034, 1023.975145, 359.997895, X, Y) && !ellipse(27577.419678, 25278.312988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27957.805725, 24374.883514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27528.774231, 21794.018478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27253.656000, 20340.860000, 1375.664040, 1375.664040, 0.000000, X, Y) && !ellipse(25371.995697, 20661.458649, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 15 11:56:19 2012] Writing fullrun_pn_xmm0149180201_pi300-10000_pass1_cl_src6.gif
[Sun Jul 15 12:29:11 2012] Mean detx,y = (-973.44, -1239.74) 
[Sun Jul 15 12:29:14 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 15 12:31:48 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 15 12:31:48 2012] Setting source spectrum file to fullrun_pn_xmm0149180201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Jul 15 12:31:48 2012] Setting bgd. spectrum file to fullrun_pn_xmm0149180201_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Mon Jul 16 01:27:06 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jul 16 01:27:06 2012] rmf not generated due to insufficient counts
[Tue Jul 17 17:19:06 2012] Updating aperture counts using extracted products
[Tue Jul 17 17:19:06 2012] Error reading totcts from fullrun_pn_xmm0149180201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Jul 17 17:19:07 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 17 17:19:07 2012] Using photon index=1.80, rate=0.241, arf fullrun_pn_xmm0149180201_pi300-10000_pass1_cl_src6.arf
[Tue Jul 17 17:19:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 17 17:19:07 2012] Updating source flux to 7.4e-13
[Tue Jul 17 17:38:16 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting