[Sat Jul  7 20:10:38 2012] Detection parameters:
  Position = (275.9, 323.0) = 16 12 50.50 -52 21 56.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 427.1 +/- 34.9
  Background counts = 221.3
  Rate = 0.08 +/- 0.007

[Sat Jul  7 20:10:39 2012] Off-axis axis estimate = 2.42'
[Sun Jul  8 11:30:23 2012] Using EEF radius (= 7.64 ")to estimate initial spatial extent for simple fitting
[Sun Jul  8 11:30:23 2012] Initial guess for spatial extent in simple fitting = 7.64"
[Sun Jul  8 11:30:23 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.786
[Sun Jul  8 11:30:23 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 7.64"
[Mon Jul  9 01:38:16 2012] fullrun_mos2_xmm0149180201_pi300-10000_cl_pass0_src18.ximg exists
[Mon Jul  9 01:38:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149180201_pi300-10000_cl_pass0_src18.csv
[Mon Jul  9 01:38:16 2012] fullrun_mos2_xmm0149180201_pi300-10000_cl_pass0_src18_1.ximg exists
[Mon Jul  9 01:38:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149180201_pi300-10000_cl_pass0_src18.csv
[Mon Jul  9 01:38:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0149180201_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0149180201_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 01:38:17 2012] fullrun_mos2_xmm0149180201_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Mon Jul  9 01:38:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149180201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Mon Jul  9 01:38:17 2012] fullrun_mos2_xmm0149180201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Mon Jul  9 01:38:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149180201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Mon Jul  9 01:38:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0149180201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0149180201_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 01:38:41 2012] Source 24 is offset by -3.240166 and 5.978481 pixels which is larger than
2 X fitted extent = 4.267545 x 4.267545, not incorporating fit results
[Mon Jul  9 01:38:41 2012] Spatial fit model total counts = 3225.810000, observed total counts = 3225.000000
[Mon Jul  9 01:38:41 2012] Offset between fit and detection position for source 24 = 1.187743 pixels
[Mon Jul  9 01:38:41 2012] Warning, changing simple spatial fit ID from 18 to 29
[Mon Jul  9 01:38:41 2012] 2935.604000 total counts/ 2816.150000 bgd. counts: snr = 2.250986
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 1.187743 pixels
  Position = (276.5, 322.0) = 16 12 50.19 -52 22 0.5
  Extent = 7.9 (2.6-13.5)", rotation angle = 0
  Source counts = 119.5 +/- 54.2
  Background counts = 2816.2
  Rate = 0.02 +/- 0.01
[Mon Jul  9 01:38:41 2012] Vigneting correction estimate = 1.000000
[Mon Jul  9 01:38:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  9 01:38:41 2012] Assessing source extent using major axis lower bound
[Mon Jul  9 01:38:41 2012] Source does appear to be extended
[Mon Jul  9 01:38:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  9 01:38:41 2012] Deleting source due to low Poisson probability 0.9