[Sat Jul  7 20:10:06 2012] Detection parameters:
  Position = (285.5, 251.5) = 16 12 45.94 -52 27 0.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1943.1 +/- 63.8
  Background counts = 415.5
  Rate = 0.4 +/- 0.01

[Sat Jul  7 20:10:07 2012] Off-axis axis estimate = 3.53'
[Sun Jul  8 01:59:16 2012] Using EEF radius (= 8.19 ")to estimate initial spatial extent for simple fitting
[Sun Jul  8 01:59:16 2012] Initial guess for spatial extent in simple fitting = 8.19"
[Sun Jul  8 01:59:16 2012] source mask rpix=1.9, npix_max = 22, mask sum = 23, frac = 1.012
[Sun Jul  8 01:59:16 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 8.19"
[Sun Jul  8 11:30:22 2012] fullrun_mos1_xmm0149180201_pi300-10000_cl_pass0_src7.ximg exists
[Sun Jul  8 11:30:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149180201_pi300-10000_cl_pass0_src7.csv
[Sun Jul  8 11:30:22 2012] fullrun_mos1_xmm0149180201_pi300-10000_cl_pass0_src7_1.ximg exists
[Sun Jul  8 11:30:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149180201_pi300-10000_cl_pass0_src7.csv
[Sun Jul  8 11:30:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0149180201_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0149180201_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul  8 11:30:22 2012] fullrun_mos1_xmm0149180201_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sun Jul  8 11:30:22 2012] fullrun_mos1_xmm0149180201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sun Jul  8 11:30:22 2012] Fit fullrun_mos1_xmm0149180201_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Mon Jul  9 01:38:34 2012] Warning, spatial fit 7 centroid is now closest to src. 22
[Mon Jul  9 01:38:34 2012] Vigneting correction estimate = 1.000000
[Mon Jul  9 01:38:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  9 01:38:34 2012] Assessing source extent using major
[Mon Jul  9 01:38:34 2012] Source does appear to be extended
[Mon Jul  9 01:38:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  9 03:20:54 2012] Using EEF radius (= 8.19 ")to estimate initial spatial extent for simple fitting
[Mon Jul  9 03:20:54 2012] Initial guess for spatial extent in simple fitting = 8.19"
[Mon Jul  9 03:20:54 2012] source mask rpix=1.9, npix_max = 22, mask sum = 23, frac = 1.012
[Mon Jul  9 03:20:54 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 8.19"
[Sat Jul 14 21:09:58 2012] fullrun_mos1_xmm0149180201_pi300-10000_cl_pass1_src7.ximg exists
[Sat Jul 14 21:09:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149180201_pi300-10000_cl_pass1_src7.csv
[Sat Jul 14 21:09:58 2012] fullrun_mos1_xmm0149180201_pi300-10000_cl_pass1_src7_1.ximg exists
[Sat Jul 14 21:09:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149180201_pi300-10000_cl_pass1_src7.csv
[Sat Jul 14 21:09:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0149180201_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0149180201_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 21:09:59 2012] fullrun_mos1_xmm0149180201_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sat Jul 14 21:09:59 2012] fullrun_mos1_xmm0149180201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sat Jul 14 21:09:59 2012] Fit fullrun_mos1_xmm0149180201_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sun Jul 15 11:55:57 2012] Warning, spatial fit 7 centroid is now closest to src. 27
[Sun Jul 15 11:55:57 2012] Spatial fit model total counts = 3479.990000, observed total counts = 3479.000000
[Sun Jul 15 11:55:57 2012] Offset between fit and detection position for source 9 = 5.778887 pixels
[Sun Jul 15 11:55:57 2012] Warning, changing simple spatial fit ID from 7 to 27
[Sun Jul 15 11:55:57 2012] 3571.854000 total counts/ 3381.370000 bgd. counts: snr = 3.275761
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 5.778887 pixels
  Position = (282.8, 246.3) = 16 12 47.23 -52 27 29.5
  Extent = 17.5" x 6.3", rotation angle = 109
  Source counts = 190.5 +/- 59.8
  Background counts = 3381.4
  Rate = 0.04 +/- 0.01
[Sun Jul 15 11:55:57 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 11:55:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 11:55:57 2012] Assessing source extent using major
[Sun Jul 15 11:55:57 2012] Source does appear to be extended
[Sun Jul 15 11:55:57 2012] Computing asymmetry using major and minor axis, asym = 2.75
[Sun Jul 15 11:55:57 2012] Source is asymmetric
[Sun Jul 15 11:55:57 2012] Source is confused with source 2
[Mon Jul 16 02:36:53 2012] XMMSAS src. selection expression = ellipse(24556.306874, 21383.585792, 1047.360030, 380.500918, 109.322326, X, Y)
[Mon Jul 16 02:36:53 2012] Writing source region out to fullrun_mos1_xmm0149180201_pi300-10000_pass1_cl_src9_src.reg
[Mon Jul 16 02:36:53 2012] Extracting stamp from image fullrun_mos1_xmm0149180201_pi300-10000_cl_sm2.00.img.gz, (223, 186) - (343, 307)
[Mon Jul 16 02:36:53 2012] XMMSAS bgd. selection expression = annulus(24556.306874, 21383.585792, 1745.600050, 3491.200100, X, Y) && !ellipse(25538.194000, 24367.416000, 7183.728207, 7183.728207, 0.000000, X, Y) && !ellipse(25610.672000, 23604.636400, 7183.728207, 7183.728207, 0.000000, X, Y) && !ellipse(25312.396000, 24615.296000, 3591.864103, 3591.864103, 187.007000, X, Y) && !ellipse(25290.298000, 22799.500000, 2544.000073, 2544.000073, 0.000000, X, Y) && !ellipse(25097.090509, 23533.887500, 6990.000201, 6829.433446, 4.521834, X, Y) && !ellipse(25851.114000, 21492.502000, 1272.000037, 1272.000037, 0.000000, X, Y) && !ellipse(26165.074188, 22271.667542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27439.080000, 22121.048000, 1263.320036, 1263.320036, 0.000000, X, Y) && !ellipse(28149.392639, 23017.534302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22993.877991, 23098.207367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22733.778046, 25044.317291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27874.435150, 24671.771545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28977.164000, 25070.765600, 1258.848036, 595.226417, -0.000000, X, Y) && !ellipse(28615.890000, 24948.146000, 2589.392075, 2589.392075, 0.000000, X, Y) && !ellipse(19735.508000, 21951.452000, 2801.600081, 2801.600081, 0.000000, X, Y) && !ellipse(22373.426000, 23064.496000, 2683.456077, 2683.456077, 0.000000, X, Y) && !ellipse(20313.308000, 22182.564000, 1439.920041, 1439.920041, 0.000000, X, Y) && !ellipse(20835.084000, 22366.200000, 1400.800040, 1400.800040, 0.000000, X, Y) && !ellipse(23290.742126, 21846.464600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23261.978840, 21199.810000, 1057.512030, 1057.512030, 0.000000, X, Y) && !ellipse(20902.692000, 22410.584400, 616.300018, 616.300018, 0.000000, X, Y) && !ellipse(21313.210000, 23531.106600, 1342.240039, 1342.240039, 0.000000, X, Y) && !ellipse(22665.251740, 25728.359039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26555.108000, 19770.184000, 1472.008042, 1472.008042, 0.000000, X, Y)
[Mon Jul 16 02:36:53 2012] Writing fullrun_mos1_xmm0149180201_pi300-10000_pass1_cl_src9.gif
[Mon Jul 16 03:03:40 2012] Mean detx,y = (2303.31, 1314.96) 
[Mon Jul 16 03:03:41 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 16 03:03:59 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 16 03:03:59 2012] Setting source spectrum file to fullrun_mos1_xmm0149180201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon Jul 16 03:03:59 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0149180201_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Tue Jul 17 17:19:10 2012] Updating aperture counts using extracted products
[Tue Jul 17 17:19:10 2012] Error reading totcts from fullrun_mos1_xmm0149180201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Tue Jul 17 17:19:11 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 17 17:19:11 2012] Using photon index=1.80, rate=0.0387, arf fullrun_mos1_xmm0149180201_pi300-10000_pass1_cl_src9.arf
[Tue Jul 17 17:19:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 17 17:19:11 2012] Updating source flux to 4.3e-13
[Tue Jul 17 17:19:15 2012] Flag c found in src. 9 procflags, skipping spectral fitting