[Sat May 19 10:17:42 2012] Detection parameters:
  Position = (357.5, 405.8) = 10 51 23.34 35 45 34.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30.7 +/- 7.4
  Background counts = 5.6
  Rate = 0.006 +/- 0.001

[Sat May 19 10:17:42 2012] Off-axis axis estimate = 8.88'
[Sat May 19 10:30:43 2012] Using EEF radius (= 10.87 ")to estimate initial spatial extent for simple fitting
[Sat May 19 10:30:43 2012] Initial guess for spatial extent in simple fitting = 10.87"
[Sat May 19 10:30:43 2012] source mask rpix=2.5, npix_max = 35, mask sum = 28, frac = 0.778
[Sat May 19 10:30:43 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.87"
[Sat May 19 10:38:43 2012] fullrun_mos1_xmm0149170601_pi300-10000_cl_pass0_src3.ximg exists
[Sat May 19 10:38:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149170601_pi300-10000_cl_pass0_src3.csv
[Sat May 19 10:38:43 2012] fullrun_mos1_xmm0149170601_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat May 19 10:38:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149170601_pi300-10000_cl_pass0_src3.csv
[Sat May 19 10:38:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0149170601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0149170601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 10:38:44 2012] fullrun_mos1_xmm0149170601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat May 19 10:38:44 2012] fullrun_mos1_xmm0149170601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat May 19 10:38:44 2012] Fit fullrun_mos1_xmm0149170601_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat May 19 10:44:26 2012] Spatial fit model total counts = 50.222300, observed total counts = 48.000000
[Sat May 19 10:44:26 2012] Offset between fit and detection position for source 2 = 0.173784 pixels
[Sat May 19 10:44:26 2012] 50.129100 total counts/ 33.895000 bgd. counts: snr = 2.788434
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.173784 pixels
  Position = (357.6, 405.7) = 10 51 23.29 35 45 35.0
  Extent = 4.3 (3.0-6.7)", rotation angle = 0
  Source counts = 16.2 +/- 7.1
  Background counts = 33.9
  Rate = 0.003 +/- 0.001
[Sat May 19 10:44:26 2012] Vigneting correction estimate = 1.000000
[Sat May 19 10:44:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 10:44:26 2012] Assessing source extent using major axis lower bound
[Sat May 19 10:44:26 2012] Source does appear to be extended
[Sat May 19 10:44:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 10:56:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 19 10:56:27 2012] Initial guess for spatial extent in simple fitting = 4.32"
[Sat May 19 10:56:27 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.009
[Sat May 19 10:56:27 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.32"
[Sat May 19 11:02:37 2012] fullrun_mos1_xmm0149170601_pi300-10000_cl_pass1_src3.ximg exists
[Sat May 19 11:02:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149170601_pi300-10000_cl_pass1_src3.csv
[Sat May 19 11:02:37 2012] fullrun_mos1_xmm0149170601_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat May 19 11:02:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149170601_pi300-10000_cl_pass1_src3.csv
[Sat May 19 11:02:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0149170601_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0149170601_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 11:02:37 2012] fullrun_mos1_xmm0149170601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat May 19 11:02:37 2012] fullrun_mos1_xmm0149170601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat May 19 11:02:37 2012] Fit fullrun_mos1_xmm0149170601_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat May 19 11:06:39 2012] Spatial fit model total counts = 55.826800, observed total counts = 52.000000
[Sat May 19 11:06:39 2012] Offset between fit and detection position for source 2 = 0.043680 pixels
[Sat May 19 11:06:39 2012] 54.992500 total counts/ 38.920800 bgd. counts: snr = 2.576149
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.043680 pixels
  Position = (357.6, 405.7) = 10 51 23.30 35 45 34.9
  Extent = 4.1 (2.9-8.2)", rotation angle = 0
  Source counts = 16.1 +/- 7.4
  Background counts = 38.9
  Rate = 0.003 +/- 0.001
[Sat May 19 11:06:39 2012] Vigneting correction estimate = 1.000000
[Sat May 19 11:06:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 11:06:39 2012] Assessing source extent using major axis lower bound
[Sat May 19 11:06:39 2012] Source does appear to be extended
[Sat May 19 11:06:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 11:16:38 2012] XMMSAS src. selection expression = ellipse(31062.134200, 35243.143000, 248.328007, 248.328007, 0.000000, X, Y)
[Sat May 19 11:16:38 2012] Writing source region out to fullrun_mos1_xmm0149170601_pi300-10000_pass1_cl_src2_src.reg
[Sat May 19 11:16:38 2012] Extracting stamp from image fullrun_mos1_xmm0149170601_pi300-10000_cl_sm2.00.img.gz, (343, 391) - (372, 420)
[Sat May 19 11:16:38 2012] XMMSAS bgd. selection expression = annulus(31062.134200, 35243.143000, 413.880012, 827.760024, X, Y)
[Sat May 19 11:16:38 2012] Writing fullrun_mos1_xmm0149170601_pi300-10000_pass1_cl_src2.gif
[Sat May 19 11:17:11 2012] Mean detx,y = (3616.74, 8030.74) 
[Sat May 19 11:17:13 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 19 11:17:21 2012] Binned source spectrum to 10 counts/bin
[Sat May 19 11:17:21 2012] Setting source spectrum file to fullrun_mos1_xmm0149170601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat May 19 11:17:21 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0149170601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat May 19 11:22:18 2012] Not generating rmf since there are only 16 counts
[Sat May 19 11:22:18 2012] rmf not generated due to insufficient counts
[Sat May 19 11:28:55 2012] Updating aperture counts using extracted products
[Sat May 19 11:28:55 2012] Error reading totcts from fullrun_mos1_xmm0149170601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat May 19 11:28:55 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 19 11:28:55 2012] Using photon index=1.80, rate=0.00284, arf fullrun_mos1_xmm0149170601_pi300-10000_pass1_cl_src2.arf
[Sat May 19 11:28:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 19 11:28:55 2012] Updating source flux to 5.8e-14
[Sat May 19 11:28:56 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting