[Tue Aug 14 10:12:53 2012] Detection parameters:
  Position = (278.1, 286.8) = 23 44 49.48 12 21 44.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 536.7 +/- 27.7
  Background counts = 5.6
  Rate = 0.07 +/- 0.004

[Tue Aug 14 10:12:53 2012] Off-axis axis estimate = 1.70'
[Tue Aug 14 11:00:14 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 11:00:14 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Tue Aug 14 11:00:14 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Tue Aug 14 11:00:14 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Tue Aug 14 11:12:28 2012] fullrun_mos2_xmm0149170101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Aug 14 11:12:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149170101_pi300-10000_cl_pass0_src1.csv
[Tue Aug 14 11:12:29 2012] fullrun_mos2_xmm0149170101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Aug 14 11:12:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0149170101_pi300-10000_cl_pass0_src1.csv
[Tue Aug 14 11:12:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0149170101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0149170101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 11:12:29 2012] fullrun_mos2_xmm0149170101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Aug 14 11:12:29 2012] fullrun_mos2_xmm0149170101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Aug 14 11:12:29 2012] Fit fullrun_mos2_xmm0149170101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Aug 14 11:12:41 2012] Spatial fit model total counts = 472.490000, observed total counts = 462.000000
[Tue Aug 14 11:12:41 2012] Offset between fit and detection position for source 1 = 0.157010 pixels
[Tue Aug 14 11:12:41 2012] 469.643000 total counts/ 133.029000 bgd. counts: snr = 29.184954
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.157010 pixels
  Position = (278.2, 286.7) = 23 44 49.45 12 21 43.4
  Extent = 4.9 (4.4-5.4)", rotation angle = 0
  Source counts = 336.6 +/- 21.7
  Background counts = 133.0
  Rate = 0.05 +/- 0.003
[Tue Aug 14 11:12:41 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 11:12:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 11:12:41 2012] Assessing source extent using major axis lower bound
[Tue Aug 14 11:12:41 2012] Source does appear to be extended
[Tue Aug 14 11:12:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 11:52:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 14 11:52:59 2012] Initial guess for spatial extent in simple fitting = 4.91"
[Tue Aug 14 11:52:59 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.849
[Tue Aug 14 11:52:59 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.91"
[Tue Aug 14 12:04:41 2012] fullrun_mos2_xmm0149170101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Aug 14 12:04:41 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0149170101_pi300-10000_cl_pass1_src1.csv
[Tue Aug 14 12:04:41 2012] fullrun_mos2_xmm0149170101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Aug 14 12:04:41 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0149170101_pi300-10000_cl_pass1_src1.csv
[Tue Aug 14 12:04:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0149170101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0149170101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 12:04:41 2012] fullrun_mos2_xmm0149170101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Aug 14 12:04:41 2012] fullrun_mos2_xmm0149170101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Aug 14 12:04:41 2012] Fit fullrun_mos2_xmm0149170101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Aug 14 12:04:52 2012] Spatial fit model total counts = 472.513000, observed total counts = 462.000000
[Tue Aug 14 12:04:52 2012] Offset between fit and detection position for source 1 = 0.000158 pixels
[Tue Aug 14 12:04:52 2012] 469.662000 total counts/ 133.141000 bgd. counts: snr = 29.164616
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000158 pixels
  Position = (278.2, 286.7) = 23 44 49.45 12 21 43.4
  Extent = 4.9 (4.4-5.4)", rotation angle = 0
  Source counts = 336.5 +/- 21.7
  Background counts = 133.1
  Rate = 0.05 +/- 0.003
[Tue Aug 14 12:04:52 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 12:04:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 12:04:52 2012] Assessing source extent using major axis lower bound
[Tue Aug 14 12:04:52 2012] Source does appear to be extended
[Tue Aug 14 12:04:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 12:28:00 2012] XMMSAS src. selection expression = ellipse(24156.317140, 24892.908800, 294.240139, 294.240139, 0.000000, X, Y)
[Tue Aug 14 12:28:00 2012] Writing source region out to fullrun_mos2_xmm0149170101_pi300-10000_pass1_cl_src1_src.reg
[Tue Aug 14 12:28:00 2012] Extracting stamp from image fullrun_mos2_xmm0149170101_pi300-10000_cl_sm2.00.img.gz, (261, 270) - (295, 304)
[Tue Aug 14 12:28:00 2012] XMMSAS bgd. selection expression = annulus(24156.317140, 24892.908800, 490.400232, 980.800465, X, Y)
[Tue Aug 14 12:28:00 2012] Writing fullrun_mos2_xmm0149170101_pi300-10000_pass1_cl_src1.gif
[Tue Aug 14 12:28:02 2012] Mean detx,y = (73.54, 76.73) 
[Tue Aug 14 12:28:05 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 14 12:28:17 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 14 12:28:17 2012] Setting source spectrum file to fullrun_mos2_xmm0149170101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug 14 12:28:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0149170101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Aug 14 12:34:53 2012] Updating aperture counts using extracted products
[Tue Aug 14 12:34:53 2012] Error reading totcts from fullrun_mos2_xmm0149170101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug 14 12:34:53 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 12:34:53 2012] Using photon index=1.80, rate=0.0463, arf fullrun_mos2_xmm0149170101_pi300-10000_pass1_cl_src1.arf
[Tue Aug 14 12:34:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 12:34:53 2012] Updating source flux to 6.5e-13
[Tue Aug 14 12:35:20 2012] Reading fit data from xmm0149170101/analysis//spectral/fullrun_mos2_xmm0149170101_pi300-10000_pass1_cl_src1_pl.csv
[Tue Aug 14 12:35:20 2012] Spectral fit parameter nH value = 5.16652e+20
[Tue Aug 14 12:35:20 2012] Spectral fit parameter PhoIndex value = 1.40882
[Tue Aug 14 12:35:20 2012] Failed to get F(0.3-8.0) from xmm0149170101/analysis//spectral/fullrun_mos2_xmm0149170101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Aug 14 12:35:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 12:35:20 2012] Using Nh = 5.2e+20, photon index=1.41, rate=0.0463, arf fullrun_mos2_xmm0149170101_pi300-10000_pass1_cl_src1.arf
[Tue Aug 14 12:35:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 12:35:20 2012] Updating source flux to 8.3e-13