[Sat Jun  9 03:55:52 2012] Detection parameters:
  Position = (145.8, 369.5) = 2 50 47.35 69 44 10.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 158.6 +/- 24.2
  Background counts = 259.2
  Rate = 0.001 +/- 0.0002

[Sat Jun  9 03:55:52 2012] Off-axis axis estimate = 12.21'
[Sat Jun  9 04:04:24 2012] Using EEF radius (= 12.53 ")to estimate initial spatial extent for simple fitting
[Sat Jun  9 04:04:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun  9 04:04:24 2012] Initial guess for spatial extent in simple fitting = 12.53"
[Sat Jun  9 04:04:24 2012] source mask rpix=2.9, npix_max = 45, mask sum = 41, frac = 0.897
[Sat Jun  9 04:04:24 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 12.53"
[Sat Jun  9 04:39:29 2012] fullrun_pn_xmm0149040201_pi300-10000_cl_pass0_src3.ximg exists
[Sat Jun  9 04:39:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149040201_pi300-10000_cl_pass0_src3.csv
[Sat Jun  9 04:39:29 2012] fullrun_pn_xmm0149040201_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Jun  9 04:39:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149040201_pi300-10000_cl_pass0_src3.csv
[Sat Jun  9 04:39:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0149040201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0149040201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 04:39:29 2012] fullrun_pn_xmm0149040201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Jun  9 04:39:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149040201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat Jun  9 04:39:29 2012] fullrun_pn_xmm0149040201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Jun  9 04:39:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0149040201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat Jun  9 04:39:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0149040201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0149040201_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 05:20:43 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.867137 pixels away
[Sat Jun  9 05:20:43 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 05:20:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 05:20:43 2012] Assessing source extent using major
[Sat Jun  9 05:20:43 2012] Source does appear to be extended
[Sat Jun  9 05:20:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 05:20:43 2012] Deleting source due to low Poisson probability 0.9