[Sat Sep 24 00:38:39 2011] Detection parameters:
  Position = (236.3, 393.9) = 9 21 2.57 37 16 35.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 212.5 +/- 23.5
  Background counts = 180.6
  Rate = 0.005 +/- 0.0005

[Sat Sep 24 00:38:40 2011] Off-axis axis estimate = 8.26'
[Sat Sep 24 01:51:23 2011] Using EEF radius (= 10.56 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 01:51:23 2011] Initial guess for spatial extent in simple fitting = 10.56"
[Sat Sep 24 01:51:23 2011] source mask rpix=2.4, npix_max = 34, mask sum = 33, frac = 0.963
[Sat Sep 24 01:51:23 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 10.56"
[Sat Sep 24 02:51:47 2011] fullrun_mos1_xmm0149010201_pi300-10000_cl_pass0_src11.ximg exists
[Sat Sep 24 02:51:47 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0149010201_pi300-10000_cl_pass0_src11.csv
[Sat Sep 24 02:51:47 2011] fullrun_mos1_xmm0149010201_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat Sep 24 02:51:47 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0149010201_pi300-10000_cl_pass0_src11.csv
[Sat Sep 24 02:51:47 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0149010201_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0149010201_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 02:51:48 2011] fullrun_mos1_xmm0149010201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat Sep 24 02:51:48 2011] fullrun_mos1_xmm0149010201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Sep 24 02:51:48 2011] Fit fullrun_mos1_xmm0149010201_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sat Sep 24 03:50:37 2011] Spatial fit model total counts = 300.952000, observed total counts = 301.000000
[Sat Sep 24 03:50:37 2011] Offset between fit and detection position for source 8 = 0.989652 pixels
[Sat Sep 24 03:50:37 2011] 303.727000 total counts/ 202.935000 bgd. counts: snr = 7.075344
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.989652 pixels
  Position = (235.3, 394.1) = 9 21 2.93 37 16 32.2
  Extent = 5.7 (4.9-6.8)", rotation angle = 0
  Source counts = 100.8 +/- 17.4
  Background counts = 202.9
  Rate = 0.002 +/- 0.0003
[Sat Sep 24 03:50:37 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 03:50:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 03:50:37 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 03:50:37 2011] Source does appear to be extended
[Sat Sep 24 03:50:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 04:57:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 04:57:52 2011] Initial guess for spatial extent in simple fitting = 5.69"
[Sat Sep 24 04:57:52 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.225
[Sat Sep 24 04:57:52 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 5.69"
[Sat Sep 24 06:07:42 2011] fullrun_mos1_xmm0149010201_pi300-10000_cl_pass1_src10.ximg exists
[Sat Sep 24 06:07:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149010201_pi300-10000_cl_pass1_src10.csv
[Sat Sep 24 06:07:42 2011] fullrun_mos1_xmm0149010201_pi300-10000_cl_pass1_src10_1.ximg exists
[Sat Sep 24 06:07:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0149010201_pi300-10000_cl_pass1_src10.csv
[Sat Sep 24 06:07:42 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0149010201_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0149010201_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 06:07:42 2011] fullrun_mos1_xmm0149010201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sat Sep 24 06:07:42 2011] fullrun_mos1_xmm0149010201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Sep 24 06:07:42 2011] Fit fullrun_mos1_xmm0149010201_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sat Sep 24 07:04:09 2011] Spatial fit model total counts = 298.678000, observed total counts = 299.000000
[Sat Sep 24 07:04:09 2011] Offset between fit and detection position for source 8 = 0.012709 pixels
[Sat Sep 24 07:04:09 2011] 299.836000 total counts/ 198.168000 bgd. counts: snr = 7.222167
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.012709 pixels
  Position = (235.3, 394.1) = 9 21 2.92 37 16 32.1
  Extent = 5.8 (4.9-6.9)", rotation angle = 0
  Source counts = 101.7 +/- 17.3
  Background counts = 198.2
  Rate = 0.002 +/- 0.0003
[Sat Sep 24 07:04:09 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 07:04:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 07:04:09 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 07:04:09 2011] Source does appear to be extended
[Sat Sep 24 07:04:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 08:43:05 2011] XMMSAS src. selection expression = ellipse(20421.711400, 34239.164200, 345.112210, 345.112210, 0.000000, X, Y)
[Sat Sep 24 08:43:05 2011] Writing source region out to fullrun_mos1_xmm0149010201_pi300-10000_pass1_cl_src8_src.reg
[Sat Sep 24 08:43:05 2011] Extracting stamp from image fullrun_mos1_xmm0149010201_pi300-10000_cl_sm2.00.img.gz, (215, 374) - (255, 414)
[Sat Sep 24 08:43:05 2011] XMMSAS bgd. selection expression = annulus(20421.711400, 34239.164200, 575.187017, 1150.374033, X, Y) && !ellipse(21487.282944, 34002.885284, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Sep 24 08:43:05 2011] Writing fullrun_mos1_xmm0149010201_pi300-10000_pass1_cl_src8.gif
[Sat Sep 24 08:52:13 2011] Mean detx,y = (8319.50, -3573.08) 
[Sat Sep 24 08:52:14 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Sep 24 08:52:19 2011] Binned source spectrum to 10 counts/bin
[Sat Sep 24 08:52:20 2011] Setting source spectrum file to fullrun_mos1_xmm0149010201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sat Sep 24 08:52:20 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0149010201_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sat Sep 24 10:35:18 2011] Updating aperture counts using extracted products
[Sat Sep 24 10:35:18 2011] Error reading totcts from fullrun_mos1_xmm0149010201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sat Sep 24 10:35:19 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 10:35:19 2011] Using photon index=1.80, rate=0.00173, arf fullrun_mos1_xmm0149010201_pi300-10000_pass1_cl_src8.arf
[Sat Sep 24 10:35:19 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Sep 24 10:35:19 2011] Updating source flux to 3.4e-14