[Tue Jun 25 08:35:33 2013] Detection parameters:
  Position = (177.8, 269.2) = 23 52 11.73 -26 6 8.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1169.2 +/- 42.9
  Background counts = 75.7
  Rate = 0.07 +/- 0.002

[Tue Jun 25 08:35:34 2013] Off-axis axis estimate = 9.00'
[Tue Jun 25 08:38:47 2013] Using EEF radius (= 10.93 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 08:38:47 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 25 08:38:47 2013] Initial guess for spatial extent in simple fitting = 10.93"
[Tue Jun 25 08:38:47 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.992
[Tue Jun 25 08:38:47 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 10.93"
[Tue Jun 25 10:14:14 2013] fullrun_pn_xmm0148990101_pi300-10000_cl_pass0_src3.ximg exists
[Tue Jun 25 10:14:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0148990101_pi300-10000_cl_pass0_src3.csv
[Tue Jun 25 10:14:14 2013] fullrun_pn_xmm0148990101_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Jun 25 10:14:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0148990101_pi300-10000_cl_pass0_src3.csv
[Tue Jun 25 10:14:14 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0148990101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0148990101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 10:14:15 2013] fullrun_pn_xmm0148990101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Jun 25 10:14:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0148990101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Jun 25 10:14:15 2013] fullrun_pn_xmm0148990101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jun 25 10:14:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0148990101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Jun 25 10:14:15 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0148990101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0148990101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 12:36:30 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.855278 pixels away
[Tue Jun 25 12:36:30 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 12:36:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 12:36:30 2013] Assessing source extent using major
[Tue Jun 25 12:36:30 2013] Source does appear to be extended
[Tue Jun 25 12:36:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 12:36:53 2013] Using EEF radius (= 10.93 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 12:36:53 2013] Initial guess for spatial extent in simple fitting = 10.93"
[Tue Jun 25 12:36:53 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.992
[Tue Jun 25 12:36:53 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 10.93"
[Tue Jun 25 16:30:04 2013] fullrun_pn_xmm0148990101_pi300-10000_cl_pass1_src3.ximg exists
[Tue Jun 25 16:30:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0148990101_pi300-10000_cl_pass1_src3.csv
[Tue Jun 25 16:30:04 2013] fullrun_pn_xmm0148990101_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Jun 25 16:30:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0148990101_pi300-10000_cl_pass1_src3.csv
[Tue Jun 25 16:30:04 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0148990101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0148990101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 16:30:04 2013] fullrun_pn_xmm0148990101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Jun 25 16:30:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0148990101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Jun 25 16:30:04 2013] fullrun_pn_xmm0148990101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jun 25 16:30:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0148990101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Jun 25 16:30:04 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0148990101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0148990101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 18:08:17 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 14.969280 pixels away
[Tue Jun 25 18:08:17 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 18:08:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 18:08:17 2013] Assessing source extent using major
[Tue Jun 25 18:08:17 2013] Source does appear to be extended
[Tue Jun 25 18:08:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 18:08:33 2013] Counts = 1169.184448, rescaling region sizes by 2.000000
[Tue Jun 25 18:08:33 2013] XMMSAS src. selection expression = ellipse(15417.761185, 23368.943359, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Jun 25 18:08:33 2013] Writing source region out to fullrun_pn_xmm0148990101_pi300-10000_pass1_cl_src3_src.reg
[Tue Jun 25 18:08:33 2013] Extracting stamp from image fullrun_pn_xmm0148990101_pi300-10000_cl_sm2.00.img.gz, (103, 194) - (253, 344)
[Tue Jun 25 18:08:33 2013] XMMSAS bgd. selection expression = annulus(15417.761185, 23368.943359, 4350.000000, 8700.000000, X, Y) && !ellipse(24179.202200, 24669.617200, 4497.576129, 3437.616099, 38.642400, X, Y) && !ellipse(23743.358246, 23528.884979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16985.806000, 20555.146000, 422.282412, 349.432010, 68.241000, X, Y) && !ellipse(24462.791534, 15081.784485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19704.302002, 26376.130432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22240.070038, 25092.492798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22911.181793, 23842.982910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24509.095245, 32513.979370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23941.333160, 31006.397980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22203.807648, 26559.776154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23327.206299, 22401.827698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17542.168274, 20901.406921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11030.785919, 20819.212524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21341.991776, 24233.104950, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 25 18:08:33 2013] Writing fullrun_pn_xmm0148990101_pi300-10000_pass1_cl_src3.gif
[Tue Jun 25 18:18:40 2013] Mean detx,y = (7921.81, -4497.65) 
[Tue Jun 25 18:18:45 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 25 18:21:17 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 25 18:21:18 2013] Setting source spectrum file to fullrun_pn_xmm0148990101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jun 25 18:21:18 2013] Setting bgd. spectrum file to fullrun_pn_xmm0148990101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Jun 25 18:48:47 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 25 18:48:47 2013] rmf not generated due to insufficient counts
[Tue Jun 25 21:27:54 2013] Updating aperture counts using extracted products
[Tue Jun 25 21:27:54 2013] Total counts from fullrun_pn_xmm0148990101_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 1775.00
[Tue Jun 25 21:27:54 2013] Total counts from fullrun_pn_xmm0148990101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 19856.00
[Tue Jun 25 21:27:54 2013] Got source and background scale factors 4945125.000000, 115932455.000000
[Tue Jun 25 21:27:54 2013] User source parameters:
  Position = (177.8, 269.2) = 23 52 11.73 -26 6 8.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 928.0 +/- 43.1
  Background aperture counts = 847.0
  Rate = 0.04 +/- 0.002

[Tue Jun 25 21:27:54 2013] Updating counts from extracted products
[Tue Jun 25 21:27:54 2013] Set source signif. to 928.04/29.10 = 31.89
[Tue Jun 25 21:27:59 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 25 21:27:59 2013] Using photon index=1.80, rate=0.041, arf fullrun_pn_xmm0148990101_pi300-10000_pass1_cl_src3.arf
[Tue Jun 25 21:27:59 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 25 21:27:59 2013] Updating source flux to 1.6e-13
[Tue Jun 25 21:28:16 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 25 21:28:20 2013] xmm0148990101/analysis//spectral/fullrun_pn_xmm0148990101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete