[Tue Jun 25 08:36:36 2013] Detection parameters:
  Position = (285.6, 311.6) = 23 51 36.89 -26 3 1.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.2 +/- 13.0
  Background counts = 54.9
  Rate = 0.002 +/- 0.0005

[Tue Jun 25 08:36:36 2013] Off-axis axis estimate = 1.33'
[Tue Jun 25 11:25:21 2013] Using EEF radius (= 7.09 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 11:25:21 2013] Initial guess for spatial extent in simple fitting = 7.09"
[Tue Jun 25 11:25:21 2013] source mask rpix=1.6, npix_max = 18, mask sum = 19, frac = 1.046
[Tue Jun 25 11:25:21 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 7.09"
[Tue Jun 25 12:36:19 2013] fullrun_mos2_xmm0148990101_pi300-10000_cl_pass0_src33.ximg exists
[Tue Jun 25 12:36:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148990101_pi300-10000_cl_pass0_src33.csv
[Tue Jun 25 12:36:19 2013] fullrun_mos2_xmm0148990101_pi300-10000_cl_pass0_src33_1.ximg exists
[Tue Jun 25 12:36:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148990101_pi300-10000_cl_pass0_src33.csv
[Tue Jun 25 12:36:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0148990101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0148990101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 12:36:19 2013] fullrun_mos2_xmm0148990101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Tue Jun 25 12:36:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148990101_pi300-10000_cl_pass0_tfrozen_src33.csv
[Tue Jun 25 12:36:19 2013] fullrun_mos2_xmm0148990101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Tue Jun 25 12:36:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148990101_pi300-10000_cl_pass0_tfrozen_src33.csv
[Tue Jun 25 12:36:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0148990101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0148990101_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 12:36:43 2013] Source 31 is offset by -5.890875 and -6.898962 pixels which is larger than
2 X fitted extent = 3.332795 x 3.332795, not incorporating fit results
[Tue Jun 25 12:36:44 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 12:36:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 12:36:44 2013] Assessing source extent using major
[Tue Jun 25 12:36:44 2013] Source does appear to be extended
[Tue Jun 25 12:36:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 12:36:44 2013] Deleting source due to low Poisson probability 0.9