[Tue Mar  6 18:48:28 2012] Detection parameters:
  Position = (252.6, 325.3) = 14 24 55.59 42 14 8.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 991.6 +/- 37.7
  Background counts = 2.3
  Rate = 0.2 +/- 0.007

[Tue Mar  6 18:48:28 2012] Off-axis axis estimate = 3.85'
[Tue Mar  6 19:29:01 2012] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting
[Tue Mar  6 19:29:01 2012] Initial guess for spatial extent in simple fitting = 8.35"
[Tue Mar  6 19:29:01 2012] source mask rpix=1.9, npix_max = 23, mask sum = 23, frac = 0.981
[Tue Mar  6 19:29:01 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.35"
[Tue Mar  6 19:52:38 2012] fullrun_mos1_xmm0148742601_pi300-10000_cl_pass0_src1.ximg exists
[Tue Mar  6 19:52:38 2012] fullrun_mos1_xmm0148742601_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Mar  6 19:52:38 2012] Fit fullrun_mos1_xmm0148742601_pi300-10000_cl_pass0_src1 appears to have run properly
[Tue Mar  6 19:52:38 2012] fullrun_mos1_xmm0148742601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Mar  6 19:52:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148742601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Mar  6 19:52:38 2012] fullrun_mos1_xmm0148742601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Mar  6 19:52:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148742601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Mar  6 19:52:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0148742601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0148742601_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 20:24:34 2012] Spatial fit model total counts = 931.028000, observed total counts = 892.000000
[Tue Mar  6 20:24:34 2012] Offset between fit and detection position for source 2 = 0.181673 pixels
[Tue Mar  6 20:24:34 2012] 935.089000 total counts/ 213.929000 bgd. counts: snr = 49.305663
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.181673 pixels
  Position = (252.4, 325.3) = 14 24 55.66 42 14 7.5
  Extent = 5.7" x 4.7", rotation angle = 322
  Source counts = 721.2 +/- 30.6
  Background counts = 213.9
  Rate = 0.09 +/- 0.004
[Tue Mar  6 20:24:34 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 20:24:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 20:24:34 2012] Assessing source extent using major
[Tue Mar  6 20:24:34 2012] Source does appear to be extended
[Tue Mar  6 20:24:34 2012] Computing asymmetry using major and minor axis, asym = 1.23
[Tue Mar  6 20:56:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar  6 20:56:43 2012] Initial guess for spatial extent in simple fitting = 5.19"
[Tue Mar  6 20:56:43 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.786
[Tue Mar  6 20:56:43 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.19"
[Tue Mar  6 21:18:52 2012] fullrun_mos1_xmm0148742601_pi300-10000_cl_pass1_src1.ximg exists
[Tue Mar  6 21:18:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148742601_pi300-10000_cl_pass1_src1.csv
[Tue Mar  6 21:18:52 2012] fullrun_mos1_xmm0148742601_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Mar  6 21:18:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0148742601_pi300-10000_cl_pass1_src1.csv
[Tue Mar  6 21:18:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0148742601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0148742601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 21:18:52 2012] fullrun_mos1_xmm0148742601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Mar  6 21:18:52 2012] fullrun_mos1_xmm0148742601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Mar  6 21:18:52 2012] Fit fullrun_mos1_xmm0148742601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Mar  6 21:43:30 2012] Spatial fit model total counts = 904.195000, observed total counts = 892.000000
[Tue Mar  6 21:43:30 2012] Offset between fit and detection position for source 2 = 0.038236 pixels
[Tue Mar  6 21:43:30 2012] 907.962000 total counts/ 202.824000 bgd. counts: snr = 49.512454
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.038236 pixels
  Position = (252.4, 325.3) = 14 24 55.65 42 14 7.3
  Extent = 5.3 (5.0-5.6)", rotation angle = 0
  Source counts = 705.1 +/- 30.1
  Background counts = 202.8
  Rate = 0.09 +/- 0.004
[Tue Mar  6 21:43:30 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 21:43:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 21:43:30 2012] Assessing source extent using major axis lower bound
[Tue Mar  6 21:43:30 2012] Source does appear to be extended
[Tue Mar  6 21:43:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar  6 22:06:16 2012] XMMSAS src. selection expression = ellipse(21912.992400, 28250.191600, 320.346009, 320.346009, 0.000000, X, Y)
[Tue Mar  6 22:06:16 2012] Writing source region out to fullrun_mos1_xmm0148742601_pi300-10000_pass1_cl_src2_src.reg
[Tue Mar  6 22:06:16 2012] Extracting stamp from image fullrun_mos1_xmm0148742601_pi300-10000_cl_sm2.00.img.gz, (234, 307) - (271, 344)
[Tue Mar  6 22:06:16 2012] XMMSAS bgd. selection expression = annulus(21912.992400, 28250.191600, 533.910015, 1067.820031, X, Y)
[Tue Mar  6 22:06:16 2012] Writing fullrun_mos1_xmm0148742601_pi300-10000_pass1_cl_src2.gif
[Tue Mar  6 22:06:19 2012] Mean detx,y = (-5878.50, -164.87) 
[Tue Mar  6 22:06:21 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar  6 22:06:32 2012] Binned source spectrum to 10 counts/bin
[Tue Mar  6 22:06:32 2012] Setting source spectrum file to fullrun_mos1_xmm0148742601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Mar  6 22:06:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0148742601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Mar  6 22:30:56 2012] Updating aperture counts using extracted products
[Tue Mar  6 22:30:56 2012] Error reading totcts from fullrun_mos1_xmm0148742601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Mar  6 22:30:57 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar  6 22:30:57 2012] Using photon index=1.80, rate=0.0927, arf fullrun_mos1_xmm0148742601_pi300-10000_pass1_cl_src2.arf
[Tue Mar  6 22:30:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar  6 22:30:57 2012] Updating source flux to 1.5e-12
[Tue Mar  6 22:31:18 2012] Reading fit data from xmm0148742601/analysis//spectral/fullrun_mos1_xmm0148742601_pi300-10000_pass1_cl_src2_pl.csv
[Tue Mar  6 22:31:18 2012] Spectral fit parameter nH value = 1.83279e+15
[Tue Mar  6 22:31:18 2012] Spectral fit parameter PhoIndex value = 2.41883
[Tue Mar  6 22:31:18 2012] Failed to get F(0.3-8.0) from xmm0148742601/analysis//spectral/fullrun_mos1_xmm0148742601_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Mar  6 22:31:18 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar  6 22:31:18 2012] Using Nh = 1.8e+15, photon index=2.42, rate=0.0927, arf fullrun_mos1_xmm0148742601_pi300-10000_pass1_cl_src2.arf
[Tue Mar  6 22:31:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar  6 22:31:18 2012] Updating source flux to 1.2e-12