[Thu Aug  2 07:45:32 2012] Detection parameters:
  Position = (256.9, 371.1) = 14 24 55.56 42 14 9.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1387.3 +/- 45.3
  Background counts = 25.1
  Rate = 0.2 +/- 0.006

[Thu Aug  2 07:45:32 2012] Off-axis axis estimate = 6.07'
[Thu Aug  2 08:02:58 2012] Using EEF radius (= 9.46 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 08:02:58 2012] Initial guess for spatial extent in simple fitting = 9.46"
[Thu Aug  2 08:02:58 2012] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.257
[Thu Aug  2 08:02:58 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.46"
[Thu Aug  2 08:16:48 2012] fullrun_mos2_xmm0148740801_pi300-10000_cl_pass0_src1.ximg exists
[Thu Aug  2 08:16:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148740801_pi300-10000_cl_pass0_src1.csv
[Thu Aug  2 08:16:48 2012] fullrun_mos2_xmm0148740801_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Aug  2 08:16:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148740801_pi300-10000_cl_pass0_src1.csv
[Thu Aug  2 08:16:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0148740801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0148740801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 08:16:48 2012] fullrun_mos2_xmm0148740801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Aug  2 08:16:48 2012] fullrun_mos2_xmm0148740801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Aug  2 08:16:48 2012] Fit fullrun_mos2_xmm0148740801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Aug  2 08:16:54 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 12.354531 pixels away
[Thu Aug  2 08:16:54 2012] Vigneting correction estimate = 1.000000
[Thu Aug  2 08:16:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  2 08:16:54 2012] Assessing source extent using major
[Thu Aug  2 08:16:54 2012] Source does appear to be extended
[Thu Aug  2 08:16:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  2 08:35:11 2012] Using EEF radius (= 9.46 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 08:35:11 2012] Initial guess for spatial extent in simple fitting = 9.46"
[Thu Aug  2 08:35:11 2012] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.257
[Thu Aug  2 08:35:11 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 9.46"
[Thu Aug  2 08:47:38 2012] fullrun_mos2_xmm0148740801_pi300-10000_cl_pass1_src1.ximg exists
[Thu Aug  2 08:47:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148740801_pi300-10000_cl_pass1_src1.csv
[Thu Aug  2 08:47:38 2012] fullrun_mos2_xmm0148740801_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Aug  2 08:47:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0148740801_pi300-10000_cl_pass1_src1.csv
[Thu Aug  2 08:47:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0148740801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0148740801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 08:47:38 2012] fullrun_mos2_xmm0148740801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Aug  2 08:47:38 2012] fullrun_mos2_xmm0148740801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Aug  2 08:47:38 2012] Fit fullrun_mos2_xmm0148740801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Aug  2 08:47:42 2012] Spatial fit model total counts = 734.999000, observed total counts = 735.000000
[Thu Aug  2 08:47:42 2012] Offset between fit and detection position for source 1 = 0.174454 pixels
[Thu Aug  2 08:47:42 2012] 733.021000 total counts/ 183.913000 bgd. counts: snr = 40.490352
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.174454 pixels
  Position = (256.7, 371.1) = 14 24 55.63 42 14 8.2
  Extent = 5.4 (5.0-5.8)", rotation angle = 0
  Source counts = 549.1 +/- 27.1
  Background counts = 183.9
  Rate = 0.09 +/- 0.004
[Thu Aug  2 08:47:42 2012] Vigneting correction estimate = 1.000000
[Thu Aug  2 08:47:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  2 08:47:42 2012] Assessing source extent using major axis lower bound
[Thu Aug  2 08:47:42 2012] Source does appear to be extended
[Thu Aug  2 08:47:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  2 08:57:51 2012] XMMSAS src. selection expression = ellipse(22283.722480, 32238.637600, 325.852209, 325.852209, 0.000000, X, Y)
[Thu Aug  2 08:57:51 2012] Writing source region out to fullrun_mos2_xmm0148740801_pi300-10000_pass1_cl_src1_src.reg
[Thu Aug  2 08:57:51 2012] Extracting stamp from image fullrun_mos2_xmm0148740801_pi300-10000_cl_sm2.00.img.gz, (238, 352) - (275, 390)
[Thu Aug  2 08:57:51 2012] XMMSAS bgd. selection expression = annulus(22283.722480, 32238.637600, 543.087016, 1086.174031, X, Y)
[Thu Aug  2 08:57:51 2012] Writing fullrun_mos2_xmm0148740801_pi300-10000_pass1_cl_src1.gif
[Thu Aug  2 08:57:53 2012] Mean detx,y = (3238.25, 5371.50) 
[Thu Aug  2 08:57:54 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  2 08:58:01 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  2 08:58:02 2012] Setting source spectrum file to fullrun_mos2_xmm0148740801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Aug  2 08:58:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0148740801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Aug  2 09:04:09 2012] Updating aperture counts using extracted products
[Thu Aug  2 09:04:09 2012] Error reading totcts from fullrun_mos2_xmm0148740801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Aug  2 09:04:09 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 09:04:09 2012] Using photon index=1.80, rate=0.0865, arf fullrun_mos2_xmm0148740801_pi300-10000_pass1_cl_src1.arf
[Thu Aug  2 09:04:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 09:04:09 2012] Updating source flux to 1.5e-12
[Thu Aug  2 09:04:27 2012] Reading fit data from xmm0148740801/analysis//spectral/fullrun_mos2_xmm0148740801_pi300-10000_pass1_cl_src1_pl.csv
[Thu Aug  2 09:04:27 2012] Spectral fit parameter nH value = 1.39419e+13
[Thu Aug  2 09:04:27 2012] Spectral fit parameter PhoIndex value = 2.32284
[Thu Aug  2 09:04:27 2012] Failed to get F(0.3-8.0) from xmm0148740801/analysis//spectral/fullrun_mos2_xmm0148740801_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Aug  2 09:04:27 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 09:04:27 2012] Using Nh = 1.4e+13, photon index=2.32, rate=0.0865, arf fullrun_mos2_xmm0148740801_pi300-10000_pass1_cl_src1.arf
[Thu Aug  2 09:04:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 09:04:27 2012] Updating source flux to 1.3e-12