[Tue Feb 14 02:11:27 2012] Detection parameters:
  Position = (381.5, 168.7) = 12 39 34.18 47 32 14.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 113.1 +/- 14.8
  Background counts = 44.9
  Rate = 0.007 +/- 0.001

[Tue Feb 14 02:11:27 2012] Off-axis axis estimate = 11.17'
[Tue Feb 14 02:13:11 2012] Using EEF radius (= 12.01 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 02:13:11 2012] Initial guess for spatial extent in simple fitting = 12.01"
[Tue Feb 14 02:13:11 2012] source mask rpix=2.8, npix_max = 42, mask sum = 46, frac = 1.081
[Tue Feb 14 02:13:11 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 12.01"
[Tue Feb 14 02:26:30 2012] fullrun_pn_xmm0148740501_pi300-10000_cl_pass0_src5.ximg exists
[Tue Feb 14 02:26:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0148740501_pi300-10000_cl_pass0_src5.csv
[Tue Feb 14 02:26:30 2012] fullrun_pn_xmm0148740501_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Feb 14 02:26:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0148740501_pi300-10000_cl_pass0_src5.csv
[Tue Feb 14 02:26:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0148740501_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0148740501_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 02:26:30 2012] fullrun_pn_xmm0148740501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Feb 14 02:26:30 2012] fullrun_pn_xmm0148740501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Feb 14 02:26:30 2012] Fit fullrun_pn_xmm0148740501_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Feb 14 02:40:51 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 15.739381 pixels away
[Tue Feb 14 02:40:51 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 02:40:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 02:40:51 2012] Assessing source extent using major
[Tue Feb 14 02:40:51 2012] Source does appear to be extended
[Tue Feb 14 02:40:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 02:40:59 2012] Using EEF radius (= 12.01 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 02:40:59 2012] Initial guess for spatial extent in simple fitting = 12.01"
[Tue Feb 14 02:40:59 2012] source mask rpix=2.8, npix_max = 42, mask sum = 46, frac = 1.081
[Tue Feb 14 02:40:59 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 12.01"
[Tue Feb 14 02:53:57 2012] fullrun_pn_xmm0148740501_pi300-10000_cl_pass1_src5.ximg exists
[Tue Feb 14 02:53:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0148740501_pi300-10000_cl_pass1_src5.csv
[Tue Feb 14 02:53:57 2012] fullrun_pn_xmm0148740501_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Feb 14 02:53:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0148740501_pi300-10000_cl_pass1_src5.csv
[Tue Feb 14 02:53:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0148740501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0148740501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 02:53:57 2012] fullrun_pn_xmm0148740501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Feb 14 02:53:57 2012] fullrun_pn_xmm0148740501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Feb 14 02:53:57 2012] Fit fullrun_pn_xmm0148740501_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Feb 14 03:07:16 2012] Spatial fit model total counts = 175.704000, observed total counts = 176.000000
[Tue Feb 14 03:07:16 2012] Offset between fit and detection position for source 5 = 0.719002 pixels
[Tue Feb 14 03:07:16 2012] 171.323300 total counts/ 102.128000 bgd. counts: snr = 6.847061
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.719002 pixels
  Position = (380.8, 168.5) = 12 39 34.48 47 32 13.3
  Extent = 6.5 (5.4-8.1)", rotation angle = 0
  Source counts = 69.2 +/- 13.1
  Background counts = 102.1
  Rate = 0.01 +/- 0.002
[Tue Feb 14 03:07:16 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 03:07:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 03:07:16 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 03:07:16 2012] Source does appear to be extended
[Tue Feb 14 03:07:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 03:07:23 2012] XMMSAS src. selection expression = ellipse(33079.802840, 14607.189800, 389.385611, 389.385611, 0.000000, X, Y)
[Tue Feb 14 03:07:23 2012] Writing source region out to fullrun_pn_xmm0148740501_pi300-10000_pass1_cl_src5_src.reg
[Tue Feb 14 03:07:23 2012] Extracting stamp from image fullrun_pn_xmm0148740501_pi300-10000_cl_sm2.00.img.gz, (358, 146) - (403, 191)
[Tue Feb 14 03:07:23 2012] XMMSAS bgd. selection expression = annulus(33079.802840, 14607.189800, 648.976019, 1297.952037, X, Y)
[Tue Feb 14 03:07:23 2012] Writing fullrun_pn_xmm0148740501_pi300-10000_pass1_cl_src5.gif
[Tue Feb 14 03:08:38 2012] Mean detx,y = (3649.74, -11049.78) 
[Tue Feb 14 03:08:40 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 14 03:08:51 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 14 03:08:51 2012] Setting source spectrum file to fullrun_pn_xmm0148740501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Feb 14 03:08:51 2012] Setting bgd. spectrum file to fullrun_pn_xmm0148740501_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Tue Feb 14 03:17:31 2012] Not generating rmf since there are only 69 counts
[Tue Feb 14 03:17:31 2012] rmf not generated due to insufficient counts
[Tue Feb 14 03:30:14 2012] Updating aperture counts using extracted products
[Tue Feb 14 03:30:14 2012] Error reading totcts from fullrun_pn_xmm0148740501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Feb 14 03:30:14 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 14 03:30:14 2012] Using photon index=1.80, rate=0.0101, arf fullrun_pn_xmm0148740501_pi300-10000_pass1_cl_src5.arf
[Tue Feb 14 03:30:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 14 03:30:14 2012] Updating source flux to 7.6e-14
[Tue Feb 14 03:30:34 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting